 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) STTA506D/F/B TURBOSWITCH TM ULTRA-FAST HIGH VOLTAGE DIODE MAIN PRODUCTS CHARACTERISTICS IF(AV) VRRM trr (typ) VF (max) FEATURES AND BENEFITS SPECIFICTO"FREEWHEELMODE"OPERATIONS: FREEWHEEL OR BOOSTER DIODE ULTRA-FAST AND SOFT RECOVERY VERY LOW OVERALL POWER LOSSES IN BOTH THE DIODE AND THE COMPANION TRANSISTOR HIGH FREQUENCY OPERATIONS INSULATED PACKAGE : ISOWATT220AC Electrical insulation : 2000VDC Capacitance < 12 pF DESCRIPTION The TURBOSWITCH is a very high performance series of ultra-fast high voltage power diodes from 600V to 1200V. TURBOSWITCH family, drastically cuts losses in both the diode and the associated switching IGBT or MOSFET in all "freewheel mode" operations ABSOLUTE RATINGS (limiting values) Symbol VRRM VRSM IF(RMS) Parameter Repetitive peak reverse voltage Non repetitive peak reverse voltage RMS forward current TO-220AC ISOWATT220AC DPAK tp=5s F=5kHz square tp=10 ms sinusoidal Value 600 600 20 10 65 55 150 -65 to 150 Unit V V A A A A C C and is particularly suitable and efficient in motor control freewheelapplicationsand in booster diode applications in power factor control circuitries. Packaged either in TO-220AC, ISOWATT220AC or in DPAK, these 600V devices are particularly intended for use on 240V domestic mains. 5A 600V 20ns 1.5V A K K A K TO-220AC STTA506D K ISOWATT220AC STTA506F A NC DPAK STTA506B IFRM IFSM Tj Tstg Repetitive peak forward current Surge non repetitive forward current Storage temperature range Maximum operating junction temperature TM : TURBOSWITCH is a trademark of STMicroelectronics November 1999 - Ed : 3D 1/10 STTA506D/F/B THERMAL AND POWER DATA Symbol Rth(j-c) P1 Pmax Parameter Junction to case Conduction power dissipation * IF(AV) = 5A =0.5 Total power dissipation Pmax = P1 + P3 (P3 = 10% P1) Test conditions TO-220AC/ DPAK ISOWATT220AC TO-220AC/ DPAK Tc= 118C ISOWATT220AC Tc= 96C TO-220AC/ DPAK Tc= 115C ISOWATT220AC Tc= 90C Value 3.5 6.0 9 10 Unit C/W W W STATIC ELECTRICAL CHARACTERISTICS Symbol VF * IR ** Vto rd Test pulse : Parameter Forward voltage drop Reverse leakage current Threshold voltage Dynamic resistance * tp = 380 s, < 2% ** tp = 5 ms, < 2% Test conditions IF =5A VR =0.8 x VRRM Ip < 3.IAV Tj = 25C Tj = 125C Tj = 25C Tj = 125C Tj = 125C Min Typ 1.25 0.75 Max 1.75 1.5 100 2 1.15 70 Unit V V A mA V m To evaluate the maximum conduction losses use the following equation : P = Vto x IF(AV) + rd x IF2(RMS) DYNAMIC ELECTRICAL CHARACTERISTICS TURN-OFF SWITCHING Symbol trr Parameter Reverse recovery time Maximum reverse recovery current Softness factor Test conditions Tj = 25C Irr = 0.25A IF = 0.5 A IR = 1A IF = 1 A dIF/dt =-50A/s VR =30V Tj = 125C VR = 400V dIF/dt = -40 A/s dIF/dt = -500 A/s Tj = 125C VR = 400V dIF/dt = -500 A/s IF =5A 3.0 11 IF =5A 0.55 Min Typ 20 50 A Max Unit ns IRM S factor TURN-ON SWITCHING Symbol t fr Parameter Forward recovery time Peak forward voltage Test conditions Tj = 25C IF =5 A, dIF/dt = 40 A/s measured at 1.1 x VFmax Tj = 25C IF =5A, dIF/dt = 40 A/s Min Typ Max 500 V 10 Unit ns VFp 2/10 STTA506D/F/B Fig. 1: Switching OFF losses versus dI/dt. Fig. 2: Forward voltage drop versus forward current. 3.00 2.75 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0.1 VFM(V) P3(W) 2.50 2.00 1.50 1.00 0.50 0.00 Tj=125C F = 10kHz VR=600V MAXIMUM VALUES Tj=125 o C dIF/dt(A/s) 0 50 100 150 200 250 300 350 400 450 500 IFM(A) 1 10 100 Fig. 3: Peak reverse recovery current versus dIF/dt. IRM(A) 25.0 90% CONFIDENCE Tj=125 oC 22.5 20.0 VR=400V IF=10A 17.5 15.0 IF= 5A 12.5 10.0 IF=2.5A 7.5 5.0 2.5 dIF/dt(A/ s) 0.0 0 100 200 300 400 500 600 700 800 900 1000 Fig. 4: Reverse recovery time versus dIF/dt. trr(ns) 90% CONFIDENCE Tj=125 oC 180 160 140 120 100 80 60 VR=400V IF=5A IF=10A 40 IF=2.5A 20 0 0 dIF/dt(A/ s) 100 200 300 400 500 600 700 800 900 1000 Fig. 5: Softness factor (tb/ta) versus dIF/dt. Fig. 6: Relative variation of dynamic parameters versus junction temperature (reference Tj = 125C). S factor 2.0 Typical values Tj=125 oC 1.8 1.6 IF<2xIF(av) VR= 400V 1.4 1.2 1.0 0.8 0.6 0.4 0.2 dIF/dt(A/ s) 0.0 0 100 200 300 400 500 600 700 800 900 1000 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0 S factor IRM Tj(oC) 25 50 75 100 125 150 3/10 STTA506D/F/B Fig. 7: Transient peak forward voltage versus dIF/ft. 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 VFP(V) 90% CONFIDENCE Tj=125 C IF= IF(av) o Fig. 8: Forward recovery time versus dIF/dt. tfr(ns) 500 450 400 350 300 250 200 150 100 50 0 0 10 20 90% CONFIDENCE Tj=125 oC VFr=1.1*VF max. IF= IF(av) dIF/dt(A/ s) dIF/dt( A/ s) 10 20 30 40 50 60 70 80 90 100 30 40 50 60 70 80 90 100 Fig. 9: Relative cariation of thermal transient impedance junction to case versus pulse duration (TO-220AC and DPAK). Fig. 10: Relative cariation of thermal transient impedance junction to case versus pulse duration (ISOWATT220AC). 4/10 STTA506D/F/B APPLICATION DATA The TURBOSWITCH is especially designed to provide the lowest overall power losses in any "FREEWHEEL Mode" application (Fig.A) considering both the diode and the companion transistor, thus optimizing the overall performance in the end application. The way of calculating the power losses is given below: TOTAL LOSSES due to the diode P = P1+ P2+ P3+ P4+ P5 Watts CONDUCTION LOSSES in the diode REVERSE LOSSES in the diode SWITCHING LOSSES in the diode SWITCHING LOSSES in the transistor due to the diode Fig. A : "FREEWHEEL" MODE SWITCHING TRANSISTOR DIODE: TURBOSWITCH IL VR t T F = 1/T = t/T LOAD 5/10 STTA506D/F/B APPLICATION DATA (Cont'd) Fig. B : STATIC CHARACTERISTICS Conduction losses : I P1 = Vt0 . IF(AV) + Rd . IF2(RMS) IF Rd VR V IR V tO VF Reverse losses : P2 = VR . IR . (1 - ) Fig. C : TURN-OFF CHARACTERISTICS V IL TRANSISTOR I t Turn-on losses : (in the transistor, due to the diode) P5 = VR x IRM 2 x ( 3 + 2 x S ) x F 6 x dIF dt VR x IRM x IL x ( S + 2 ) x F + 2 x dIF dt Turn-off losses (in the diode) : I dI F /dt V I RM ta tb t dIR /dt VR trr = ta + tb I dI F /dt = VR /L V IRM ta tb t dI R /dt VR trr = ta + tb S = tb/ta DIODE P3 = VR x IRM 2 x S x F 6 x dIF dt P3 and P5 are suitable for power MOSFET and IGBT S = tb / ta RECTIFIER OPERATION 6/10 STTA506D/F/B APPLICATION DATA (Cont'd) Fig. D : TURN-ON CHARACTERISTICS IF dI F /dt I Fmax Turn-on losses : P4 = 0.4 (VFP - VF) . IFmax . tfr . F t 0 VF V Fp 1.1V F 0 tfr VF t 7/10 STTA506D/F/B PACKAGE MECHANICAL DATA DPAK DIMENSIONS Millimeters Inches Min. A A1 A2 B B2 C C2 D E G H L2 L4 V2 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 0.60 0 Max 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 1.00 8 Min. 0.086 0.035 0.001 0.025 0.204 0.017 0.018 0.236 0.251 0.173 0.368 0.023 0 Max. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.259 0.181 0.397 0.039 8 REF. 0.80 typ. 0.031 typ. FOOTPRINT DIMENSIONS (in millimeters) 6.7 Cooling method : by conduction(C) 6.7 6.7 3 1.6 2.3 2.3 1.6 8/10 STTA506D/F/B PACKAGE MECHANICAL DATA ISOWATT220AC A H B REF. A B L7 DIMENSIONS Millimeters Inches Min. 4.40 2.50 2.40 0.40 0.75 1.15 4.95 10.00 Max. 4.60 2.70 2.75 0.70 1.00 1.70 5.20 10.40 Min. 0.173 0.098 0.094 0.016 0.030 0.045 0.195 0.394 Max. 0.181 0.106 0.108 0.028 0.039 0.067 0.205 0.409 Diam L6 L2 L3 D E F F1 G F1 H L2 L3 F G D E 16.00 typ. 28.60 30.60 15.90 9.00 3.00 16.40 9.30 3.20 0.630 typ. 1.125 1.205 0.626 0.354 0.118 0.646 0.366 0.0126 L6 L7 Diam Cooling method : by conduction (C) Recommanded torque value : 0.55m.N Maximum torque value : 0.7m.N 9/10 STTA506D/F/B PACKAGE MECHANICAL DATA TO-220AC DIMENSIONS Millimeters Inches Min. 4.40 1.23 2.40 0.49 0.61 1.14 4.95 Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 REF. A H2 C L5 OI L6 L2 D L7 A C D E F F1 G H2 L2 L4 L5 L6 L7 L9 M Diam. I L9 F1 L4 10.00 10.40 16.40 typ. 13.00 2.65 15.25 6.20 14.00 2.95 15.75 6.60 0.393 0.409 0.645 typ. 0.511 0.104 0.600 0.244 0.551 0.116 0.620 0.259 F G M E 3.50 3.93 2.6 typ. 3.75 3.85 0.137 0.154 0.102 typ. 0.147 0.151 Cooling method : by conduction (C) Recommanded torque value : 0.55m.N Maximum torque value : 0.7m.N Ordering type STTA506D STTA506F STTA506B STTA506B-TR Marking STTA506D STTA506F STTA506B STTA506B Package TO-220AC ISOWATT220AC DPAK DPAK Weight 1.86g 2g 0.3g 0.3g Base qty 50 50 75 2500 Delivery mode Tube Tube Tube Tape & reel Epoxy meets UL94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 10/10 |
Price & Availability of STTA506
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |