 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC2400A Series THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR DESCRIPTION PC2400A Series are low dropout regulators which have 1 A capable for the output current. These ICs are built-in the saturation protection circuit of the output transistor. FEATURES * Built-in the saturation protection circuit of the output transistor. * The capability of output current is 1 A * High accuracy of output voltage. | VO | 2 % (TJ = 25 C) | VO | 3 % (0 C TJ 125 C) * Low dropout voltage. VDIF 1 V (IO 1 A, TJ 125 C) * Built-in overcurrent protection circuit, thermal shut-down circuit. * Built-in Safe Operating Area protection circuit. * Compatible for PC2400 Series. CONNECTION DIAGRAM (TOP VIEW) 1 2 3 1: INPUT 2: GND 3: OUTPUT ORDERING INFORMATION Output Voltage 5V 6V 7V 8V 9V 10 V 12 V 15 V 18 V Type Number Package MP-45G (Isolated TO-220) PC2405AHF PC2406AHF PC2407AHF PC2408AHF PC2409AHF PC2410AHF PC2412AHF PC2415AHF PC2418AHF Document No. G10352EJ2V0DS00 (2nd edition) Date Published December 1995 P Printed in Japan (c) 1995 2 Start-up circuit Thermal shut down Reference voltage Drive circuit Over-current protection BLOCK DIAGRAM - + Error amplifier Safe operating area protection Saturation protection PC2400A Series OUTPUT GND INPUT PC2400A Series ABSOLUTE MAXIMUM RATINGS (TA = 25 C, Unless otherwise specified.) PARAMETER Input Voltage Internal Power Dissipation Operating Ambient Temperature Range Operating Junction Temperature Range Storage Temperature Range Thermal Resistance (Junction to Case) Thermal Resistance (Junction to Ambient) SYMBOL VIN PT(TC = 25 C) TA TJ Tstg Rth(J - C) Rth(J - A) RATING 36 15 Note -20 to +85 -20 to +150 -55 to +150 5.0 65 UNIT V W C C C C/W C/W Note Internally limited TYPICAL CONNECTION D1 INPUT CIN PC2400A + COUT D2 OUTPUT CIN D1 D2 : 0.1 to 0.47 F. : Need for VO > VIN. : Need for VO < GND. COUT : More than 47 F. RECOMMENDED OPERATING CONDITIONS PARAMETER Input Voltage SYMBOL VIN TYPE NUMBER MIN. 6 7 8 9 10 11 13 16 19 0 -20 -20 TYP. 9 10 11 13 14 15 18 22 25 MAX. 20 21 22 23 24 25 27 27 28 1 +85 +125 A C C UNIT V PC2405AHF PC2406AHF PC2407AHF PC2408AHF PC2409AHF PC2410AHF PC2412AHF PC2415AHF PC2418AHF Output Current Operating Ambient Temperature Range Operating Junction Temperature Range IO TA TJ All All All 3 PC2400A Series ELECTRICAL CHARACTERISTICS PC2405A (VIN = 9 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 4.9 4.85 TYP. 5.0 MAX. 5.1 5.15 UNIT V 6 V VIN 20 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 6.5 V VIN 20 V 5 mA IO 1 A IO = 0 IO = 1 A mA VIN = 4.5 V, IO = 0 mA VIN = 4.5 V, IO = 1 A mA 6.5 V VIN 20 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 6.5 V VIN 16.5 V IO = 1 A, 0 C TJ 125 C VIN = 20 V TEST CONDITIONS 4.85 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 6 3 2.3 9 Start-up Current IBIAS(S) 5.15 50 50 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.65 59 90 64 0.5 1.2 2.2 -0.4 20 Vrms dB 1.0 V A 3.1 A mV/C IO = 5 mA, 0 C TJ 125 C PC2406A (VIN = 10 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 5.88 5.82 TYP. 6.0 MAX. 6.12 6.18 UNIT V 7 V VIN 21 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 7.5 V VIN 21 V 5 mA IO 1A IO = 0 IO = 1 A mA VIN = 5.5 V, IO = 0 mA VIN = 5.5 V, IO = 1 A mA 7.5 V VIN 21 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 7.5 V VIN 17.5 V IO = 1 A, 0 C TJ 125 C VIN = 21 V TEST CONDITIONS 5.82 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 7 4 2.3 9 Start-up Current IBIAS(S) 6.18 60 60 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.65 58 110 63 0.5 1.2 2.2 0.4 20 Vrms dB 1.0 V A 3.1 A mV/C IO = 5 mA, 0 C TJ 125 C 4 PC2400A Series PC2407A (VIN = 11 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 6.86 6.79 TYP. 7.0 MAX. 7.14 7.21 UNIT V 8 V VIN 22 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 8.5 V VIN 22 V 5 mA IO 1 A IO = 0 IO = 1 A mA VIN = 6.5 V, IO = 0 mA VIN = 6.5 V, IO = 1 A mA 8.5 V VIN 22 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 8.5 V VIN 18.5 V IO = 1 A, 0 C TJ 125 C VIN = 22 V TEST CONDITIONS 6.79 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 8 4 2.3 9 Start-up Current IBIAS(S) 7.21 70 70 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.65 57 130 62 0.5 1.2 2.2 0.4 20 Vrms dB 1.0 V A 3.1 A mV/C IO = 5 mA, 0 C TJ 125 C PC2408A (VIN = 13 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 7.85 7.75 TYP. 8.0 MAX. 8.15 8.25 UNIT V 9 V VIN 23 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 9.5 V VIN 23 V 5 mA IO 1 A IO = 0 IO = 1 A mA VIN = 7.5 V, IO = 0 mA VIN = 7.5 V, IO = 1 A mA 9.5 V VIN 23 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 9.5 V VIN 19.5 V IO = 1 A, 0 C TJ 125 C VIN = 23 V TEST CONDITIONS 7.75 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 9 5 2.3 9 Start-up Current IBIAS(S) 8.25 80 80 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.6 56 150 61 0.5 1.2 2.2 0.5 20 Vrms dB 1.0 V A 3.05 A mV/C IO = 5 mA, 0 C TJ 125 C 5 PC2400A Series PC2409A (VIN = 14 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 8.82 8.73 TYP. 9.0 MAX. 9.18 9.27 UNIT V 10 V VIN 24 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 10.5 V VIN 24 V 5 mA IO 1 A IO = 0 IO = 1 A mA VIN = 8.5 V, IO = 0 mA VIN = 8.5 V, IO = 1 A mA 10.5 V VIN 24 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 10.5 V VIN 20.5 V IO = 1 A, 0 C TJ 125 C VIN = 24 V TEST CONDITIONS 8.73 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 11 5 2.4 9 Start-up Current IBIAS(S) 9.27 90 90 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.6 55 170 60 0.5 1.0 2.2 0.9 20 Vrms dB 1.0 V A 3.05 A mV/C IO = 5 mA, 0 C TJ 125 C PC2410A (VIN = 15 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 9.8 9.7 TYP. 10 MAX. 10.2 10.3 UNIT V 11 V VIN 25 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 11.5 V VIN 25 V 5 mA IO 1A IO = 0 IO = 1 A mA VIN = 9.5 V, IO = 0 mA VIN = 9.5 V, IO = 1 A mA 11.5 V VIN 25 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 11.5 V VIN 21.5 V IO = 1 A, 0 C TJ 125 C VIN = 25 V TEST CONDITIONS 9.7 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 12 6 2.4 9 Start-up Current IBIAS(S) 10.3 100 100 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.6 54 190 59 0.5 1.0 2.2 0.8 20 Vrms dB 1.0 V A 3.05 A mV/C IO = 5 mA, 0 C TJ 125 C 6 PC2400A Series PC2412A (VIN = 18 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 11.75 11.65 TYP. 12 MAX. 12.25 12.35 UNIT V 13 V VIN 27 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 14 V VIN 27 V 5 mA IO 1 A IO = 0 IO = 1 A mA VIN = 11.5 V, IO = 0 mA VIN = 11.5 V, IO = 1 A mA 14 V VIN 27 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 14 V VIN 24 V IO = 1 A, 0 C TJ 125 C VIN = 27 V TEST CONDITIONS 11.65 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 14 7 2.4 10 Start-up Current IBIAS(S) 12.35 120 120 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.58 53 230 58 0.5 0.8 2.2 0.8 20 Vrms dB 1.0 V A 3.03 A mV/C IO = 5 mA, 0 C TJ 125 C PC2415A (VIN = 22 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 14.7 14.55 TYP. 15 MAX. 15.3 15.45 UNIT V 16 V VIN 27 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 17 V VIN 27 V 5 mA IO 1A IO = 0 IO = 1 A mA VIN = 14.5 V, IO = 0 mA VIN = 14.5 V, IO = 1 A mA 17 V VIN 27 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 17 V VIN 27 V IO = 1 A, 0 C TJ 125 C VIN = 27 V TEST CONDITIONS 14.55 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 18 9 2.5 10 Start-up Current IBIAS(S) 15.45 150 150 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.55 51 290 56 0.5 0.8 2.2 1.6 20 Vrms dB 1.0 V A 3.0 A mV/C IO = 5 mA, 0 C TJ 125 C 7 PC2400A Series PC2418A (VIN = 25 V, IO = 500 mA, TJ = 25 C, Unless otherwise specified) PARAMETER Output Voltage SYMBOL VO MIN. 17.64 17.46 TYP. 18 MAX. 18.36 18.54 UNIT V 19 V VIN 28 V, 5 mA IO 500 mA, 0 C TJ 125 C 5 mA IO 1 A, 0 C TJ 125 C mV mV mA 20 V VIN 28 V 5 mA IO 1 A IO = 0 IO = 1 A mA VIN = 17.5 V, IO = 0 mA VIN = 17.5 V, IO = 1 A mA 20 V VIN 28 V, IO = 1 A 10 Hz f 100 kHz f = 120 Hz, 20 V VIN 28 V IO = 1 A, 0 C TJ 125 C VIN = 28 V TEST CONDITIONS 17.46 Line Regulation Load Regulation Quiescent Current REGIN REGL IBIAS 22 11 2.5 10 Start-up Current IBIAS(S) 18.54 180 180 3.2 60 15 75 Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Temperature Coefficient of Output Voltage IBIAS Vn R*R VDIF IOshort IOpeak VO/T 1.55 49 350 54 0.5 0.8 2.2 2.5 20 Vrms dB 1.0 V A 3.0 A mV/C IO = 5 mA, 0 C TJ 125 C 8 PC2400A Series TYPICAL CHARACTERISTICS Pd - TA 20 100 VO - TJ ( PC2405A) 15 VO - Output Voltage Deviation - mV VIN = 9 V ID = 5 mA 50 Pd - Power Dissipation - W ith W Inf t ini ea eH 10 Wit h1 0 C 0 nk tsi /W He ats ink 5 1.92 0 -50 Without H eatsink 75 85 C 25 50 100 125 150 -100 0 TA - Ambient Temperature - C VO - VIN (PC2405A) 8 TJ = 25 C 7 20 50 100 TJ - Junction Temperature - C 150 IBIAS (IBIAS(S)) - VIN (PC2405A) TJ = 25 C VO - Output Voltage - V 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 VO = 0 mA 500 mA 1A IBIAS - Quiescent Current - mA 10 IO = 1 A 500 mA 0 mA 0 2 4 6 8 10 VIN - Input Voltage - V VIN - Input Voltage - V IOpeak - (VIN - VO) 3 VDIF - TJ 1 IO = 1 A TJ IOpeak -Peak Output Current - A =- VDIF -Dropout Voltage - V 0.8 20 C 2 0.6 25 C 0.4 125 1 C 0.2 0 0 50 100 150 0 10 (VIN - VO) - Input Output Differential - V 20 TJ - Junction Temperature - C 9 PC2400A Series TYPICAL CHARACTERISTICS R * R - f (PC2405A) 80 TJ = 25 C IO = 500 mA 1 TJ = 25 C VO = -2 % VDIF - IO R * R - Ripple Rejection - dB 60 VDIF - Dropout Voltage - V 101 102 103 f - Frequency - Hz 104 105 0.8 0.6 40 0.4 20 0.2 0 0 0 0.2 0.4 0.6 0.8 1 IO - Output Current - A LINE TRANSIENT RESPONSE (PC2405A) LOAD TRANSIENT RESPONSE (PC2405A) VIN - Input Voltage - V 20 15 10 VO - Output Voltage Deviation - V VO - Output Voltage Deviation - V TJ = 25 C IO = 0.5 A CIN = 0.33 F COUT = 47 F IO - Output Current - A 1.0 0.5 0 TJ = 25 C VIN = 9 V CIN = 0.33 F COUT = 47 F +0.2 0 -0.2 +0.1 0 -0.1 0 20 40 t - Time - s 60 80 0 20 40 t - Time - s 60 80 10 PC2400A Series PACKAGE DIMENSIONS (Unit: mm) PC2400AHF Series 3PIN PLASTIC SIP (MP-45G) 11 PC2400A Series RECOMMENDED SOLDERING CONDITIONS The following conditions (see table below) must be met when soldering this product. Please consult with our sales offices in case other soldering process is used, or in case soldering is done under different conditions. TYPES OF THROUGH HOLE MOUNT DEVICE PC2400AHF Series Soldering Process Wave soldering Soldering Conditions Solder temperature: 260 C or below. Flow Time: 10 seconds or below. Symbol REFERENCE Document Name NEC semiconductor device reliability/quality control system. Quality grade on NEC semiconductor devices. Semiconductor device mounting technology manual. Semiconductor device package manual. Guide to quality assurance for semiconductor devices. Semiconductor selection guide. Document No. IEI-1212 IEI-1209 IEI-1207 IEI-1213 MEI-1202 MF-1134 12 PC2400A Series [MEMO] 13 |
Price & Availability of UPC2400A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |