 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optical disc ICs 2-channel reversible-motor driver BA6193 The BA6193 is a 2-channel motor driver for CD player changers and electric volume switches, and other applications as well. Because it uses a negative power supply, this IC uses the power supply of application products efficiently. FApplications CD players and CD-ROM drives with loading features, etc. FFeatures 1) Reversible-motor driver with dual independent channels. 2) Four modes forward, reverse, stop (free rotation) and brake are output according to control logic input (two inputs). 3) 4) 5) 6) Output voltage is set with the Vref pin. Internal power supply voltage drop mute circuit. Internal thermal shutdown circuit. Negative power supply. FAbsolute maximum ratings (Ta = 25_C) FRecommended operating conditions (Ta = 25_C) 160 Optical disc ICs FBlock diagram BA6193 FPin descriptions 161 Optical disc ICs FInput / output circuits BA6193 FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 25_C, Vref = 2.5V) 162 Optical disc ICs FMeasurement circuit BA6193 163 Optical disc ICs FInput and output truth table BA6193 FApplication example 164 Optical disc ICs FOperation notes 1) The BA6193 has an internal shutdown circuit with hysteresis capabilities. Output current is muted when the chip temperature exceeds 175_C (typically) and restored when the chip temperature falls to 150_C (typically). 2) The output current is muted when the power supply voltage (VCC) drops below 3.0V. During muting, the output voltage is VEE. 3) In the forward and reverse modes, an output voltage twice that of the reference voltage is generated. BA6193 However, normal voltage is not output when the reference voltage is below 1.0V or about VCC / 2-1.0V. 4) Vcc is the reference voltage for the input voltage of logic input pins. In terms of potential relative to VEE, the HIGH level is (VCC+5.0)V and the LOW level is VCC. Fig. 6 shows each pin's potential level. 5) Be sure to attach a bypass capacitor to the power supply, at the base of the IC. FElectrical characteristic curves 165 Optical disc ICs BA6193 FExternal dimensions (Units: mm) 166 |
Price & Availability of BA6193
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |