View IDT74LVCU04A_241866.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IDT74LVCU04A 3.3V CMOS HEX INVERTER WITH 5V TOLERANT INPUTS
INDUSTRIAL TEMPERATURE RANGE
3.3V CMOS HEX INVERTER WITH 5 VOLT TOLERANT INPUTS
FEATURES: DESCRIPTION:
IDT74LVCU04A
* 0.5 MICRON CMOS Technology * ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) * VCC = 3.3V 0.3V, Normal Range * VCC = 2.7V to 3.6V, Extended Range * CMOS power levels (0.4 W typ. static) * Rail-to-Rail output swing for increased noise margin * Inputs are 5V tolerant * Available in SOIC, SSOP, and TSSOP packages
The LVCU04A hex inverter is built using advanced dual metal CMOS technology. This device contains six independent inverters with unbuffered outputs and performs the Boolean function Y = A. The LVCU04A has been designed with a 24mA output driver. This driver is capable of driving a moderate to heavy load while maintaining speed performance. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of this device as a translator in a mixed 3.3V/5V system environment.
DRIVE FEATURES:
* High Output Drivers: 24mA * Reduced system switching noise
APPLICATIONS:
* 5V and 3.3V mixed voltage systems * Data communication and telecommunication systems
FUNCTIONAL BLOCK DIAGRAM
PIN CONFIGURATION
1A 1Y 2A
1 2 3 4 5 6 7
14 13 12 11 10 9 8
VCC
6A 6Y 5A 5Y 4A 4Y
A
Y
2Y 3A 3Y
GND
SOIC/ SSOP/ TSSOP TOP VIEW
PIN DESCRIPTION
Pin Names xA xY Data Inputs Data Outputs Description
FUNCTION TABLE (EACH INVERTER)(1)
Inputs xA H L
NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level
Outputs xY L H
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
1
(c)2000 Integrated Device Technology, Inc.
JUNE 2000
DSC-4775/1
IDT74LVCU04A 3.3V CMOS HEX INVERTER WITH 5V TOLERANT INPUTS
INDUSTRIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS(1)
Symbol VTERM TSTG IOUT IIK IOK ICC ISS
(2)
CAPACITANCE (TA = +25C, F = 1.0MHz)
Unit V V C mA mA mA Symbol CIN COUT CI/O Parameter(1) Input Capacitance Output Capacitance I/O Port Capacitance Conditions VIN = 0V VOUT = 0V VIN = 0V Typ. 4.5 5.5 6.5 Max. 6 8 8 Unit pF pF pF
Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Storage Temperature DC Output Current Continuous Clamp Current, VI < 0 or VO < 0 Continuous Current through each VCC or GND
Max -0.5 to +6.5 -0.5 to VCC+0.5 -65 to +150 -50 to +50 -50 100
VTERM(3)
NOTE: 1. As applicable to the device type.
NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. Vcc and Input terminals. 3. Output terminals only.
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified: Operating Condition: TA = -40C to +85C
Symbol Parameter VCC = 1.65V VCC = 2.3V VIH Input HIGH Voltage Level VCC = 2.7V VCC = 3V VCC = 3.6V VCC = 1.65V VIL IIH IIL VIK VH ICCL ICCH ICCZ ICC Clamp Diode Voltage Input Hysteresis Quiescent Power Supply Current VCC = 2.3V, IIN = -18mA VCC = 3.3V VCC = 3.6V, VIN = GND or VCC -- -- -- -0.7 100 -- -1.2 -- 10 V mV A Input LOW Voltage Level Input Leakage Current VCC = 2.3V VCC = 2.7V to 3.6V VCC = 3.6V VI = 0 to 5.5V Test Conditions Min. 1.32 1.84 2.16 2.4 2.88 -- -- -- -- Typ.(1) -- -- -- -- -- -- -- -- -- Max. -- -- -- -- -- 0.4 0.5 0.65 5 A V V Unit
Quiescent Power Supply Current Variation
One input at VCC - 0.6V, other inputs at VCC or GND
--
--
500
A
NOTE: 1. Typical values are at VCC = 3.3V, +25C ambient.
2
IDT74LVCU04A 3.3V CMOS HEX INVERTER WITH 5V TOLERANT INPUTS
INDUSTRIAL TEMPERATURE RANGE
OUTPUT DRIVE CHARACTERISTICS
Symbol VOH Parameter Output HIGH Voltage VCC = 1.65V VCC = 2.3V VCC = 2.7V VCC = 3V VCC = 3V VOL Output LOW Voltage VCC =1.65V to 3.6V VCC = 1.65V VCC = 2.3V VCC = 2.7V VCC = 3V IOH = - 24mA IOL = 0.1mA IOL = 4mA IOL = 8mA IOL = 12mA IOL = 24mA Test Conditions(1) VCC = 1.65V to 3.6V IOH = - 0.1mA IOH = - 4mA IOH = - 8mA IOH = - 12mA Min. VCC - 0.2 1.2 1.7 2.2 2.4 2.2 -- -- -- -- -- Max. -- -- -- -- -- -- 0.2 0.45 0.7 0.4 0.55 V Unit V
NOTE: 1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range. TA = - 40C to + 85C.
OPERATING CHARACTERISTICS, TA = 25C
VCC = 2.5V 0.2V Symbol CPD Parameter Power Dissipation Capacitance per Inverter Test Conditions CL = 0pF, f = 10Mhz Typical -- VCC = 3.3V 0.3V Typical 5 Unit pF
SWITCHING CHARACTERISTICS(1)
VCC = 1.8V Symbol tPLH tPHL tSK(o) Parameter Propagation Delay xA to xY Output Skew(2) -- -- -- -- -- -- 1 ns Typ. 12.7 VCC = 2.5V 0.2V Min. 1 Max. 6.7 VCC = 2.7V Min. -- Max. 4.7 VCC = 3.3V 0.3V Min. 1 Max. 3.8 Unit ns
NOTES: 1. See TEST CIRCUITS AND WAVEFORMS. TA = - 40C to + 85C. 2 Skew between any two outputs of the same package and switching in the same direction.
3
IDT74LVCU04A 3.3V CMOS HEX INVERTER WITH 5V TOLERANT INPUTS
INDUSTRIAL TEMPERATURE RANGE
TEST CIRCUITS AND WAVEFORMS TEST CONDITIONS
Symbol VLOAD VIH VT VLZ VHZ CL VCC(1)= 2.5V0.2V 2 x Vcc Vcc Vcc / 2 150 150 30 VCC(2)= 3.3V0.3V & 2.7V 6 3 1.5 300 300 50 Unit V V V mV mV pF
SAME PHASE INPUT TRANSITION tPLH OUTPUT tPLH OPPOSITE PHASE INPUT TRANSITION tPHL tPHL
VIH VT 0V VOH VT VOL VIH VT 0V
Propagation Delay
LVC QUAD Link
VCC 500 Pulse Generator
(1, 2)
VLOAD Open GND ENABLE CONTROL INPUT tPZL OUTPUT SWITCH NORMALLY CLOSED LOW tPZH OUTPUT SWITCH NORMALLY OPEN HIGH VLOAD/2 VT tPHZ VT 0V tPLZ DISABLE VIH VT 0V VLOAD/2 VLZ VOL VOH VHZ 0V
LVC QUAD Link
VIN D.U.T. RT
VOUT
500 CL
LVC QUAD Link
Test Circuit for All Outputs
DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. NOTES: 1. Pulse Generator for All Pulses: Rate 10MHz; tF 2ns; tR 2ns. 2. Pulse Generator for All Pulses: Rate 10MHz; tF 2.5ns; tR 2.5ns.
NOTE: 1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
Enable and Disable Times
SWITCH POSITION
Test Open Drain Disable Low Enable Low Disable High Enable High All Other Tests Switch VLOAD GND Open
DATA INPUT TIMING INPUT SYNCHRONOUS CONTROL ASYNCHRONOUS CONTROL
tSU
tH
tREM
INPUT
tPLH1
tPHL1
VIH VT 0V VOH VT VOL VOH VT VOL
tSU
tH
VIH VT 0V VIH VT 0V VIH VT 0V VIH VT 0V
LVC QUAD Link
Set-up, Hold, and Release Times
LOW-HIGH-LOW PULSE tW HIGH-LOW-HIGH PULSE VT
LVC QUAD Link
OUTPUT 1
tSK (x)
tSK (x)
VT
OUTPUT 2 tPLH2 tPHL2
tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1
LVC QUAD Link
Output Skew - tSK(X)
NOTES: 1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs. 2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank.
Pulse Width
4
IDT74LVCU04A 3.3V CMOS HEX INVERTER WITH 5V TOLERANT INPUTS
INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION
XX LVC XXX XX IDT Temp. Range Device Type Package
DC PY PG
Small Outline IC Shrink Small Outline Package Thin Shrink Small Outline Package
U04A Hex Inverter, 24mA 74 - 40C to +85C
CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054
for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com
for Tech Support: logichelp@idt.com (408) 654-6459
5

▲Up To Search▲

Price & Availability of IDT74LVCU04A

	To Download IDT74LVCU04A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .