 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VISHAY LH1523BB/ BAC/ BACTR Vishay Semiconductors Dual 1 Form B Solid State Relay Features * * * * * * * * * * Dual Channel (LH1511) Isolation Test Voltage 3750 VRMS Typical RON 10 Load Voltage 200 V Load Current 200 mA High Surge Capability Linear, AC/DC Operation Clean Bounce Free Switching Low Power Consumption SMD Lead Available on Tape and Reel DIP SMD S1 8 S1 S1' S1' S2 76 S2' 5 S2 i179084 S2' 1 2 3 4 Agency Approvals * UL - File No. E52744 * CSA - Certification 093751 * BSI Description The LH1523 dual 1 Form B relays are SPST normally closed switches that can replace electromechanical relays in many applications. The relays are constructed as a multi chip hybrid device. Actuation control is via an Infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. Applications General Telecom Switching - On/off Hook Control - Ring Delay - Dial Pulse - Ground Start - Ground Fault Protection Instrumentation Industrial Controls Order Information Part LH1523BAC LH1523BACTR LH1523BB Remarks SMD-8, Tubes SMD-8, Tape and Reel DIP-8, Tubes Document Number 83822 Rev. 1.2, 05-Nov-03 www.vishay.com 1 LH1523BB/ BAC/ BACTR Vishay Semiconductors Absolute Maximum Ratings, Tamb = 25 C VISHAY Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability. SSR Parameter LED continuous forward current LED reverse voltage DC or peak AC load voltage Continuous DC load current one pole operating Continuous DC load current two poles operating Peak load current (single shot) Ambient temperature range Storage temperature range Pin soldering temperature Input/output isolation voltage Pole-to-pole isolation voltage (S1 to S2)1) (dry air, dust free, at sea level) Output power dissipation (continuous) 1) Test condition IR 10 A IL 50 A Symbol IF VR VL IL IL Value 50 5.0 200 200 140 400 - 40 to + 85 - 40 to + 125 260 3750 1600 Unit mA V V mA mA mA C C C VRMS V t = 100 ms IP Tamb Tstg t = 10 s max t = 1.0 s, IISO = 10 A max Tsld VISO Pdiss 600 mW Breakdown occurs between the output pins external to the package. Electrical Characteristics, Tamb = 25 C Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Input Parameter LED forward current, switch turn-on LED forward current, switch turn-off LED forward voltage Test condition IL = 200 mA, t = 10 ms VL = 150 V IF = 10 mA Symbol IFon IFoff VF 1.15 Min 0.2 Typ. 0.9 1.0 1.22 2.0 1.45 Max Unit mA mA V Output Parameter ON-resistance OFF-resistance Off-state leakage current Output capacitance Test condition IF = 0 mA, IL = 50 mA IF = 5.0 mA, VL = 100 V IF = 5.0 mA, VL = 200 V IF = 5.0 mA, VL = 50 V Symbol RON ROFF 0.1 Min Typ. 10 1.4 0.07 50 1.0 Max 15 Unit G A pF www.vishay.com 2 Document Number 83822 Rev. 1.2, 05-Nov-03 VISHAY Transfer Parameter Input/output capacitance Turn-on time Turn-off time Test condition VISO = 1.0 V IF = 10 mA, IL = 50 mA IF = 10 mA, IL = 50 mA LH1523BB/ BAC/ BACTR Vishay Semiconductors Symbol CISO ton toff Min Typ. 3.0 1.0 2.0 Max 3.0 3.0 Unit pF ms ms Typical Characteristics (Tamb = 25 C unless otherwise specified) 150 5.0 mA 120 Load Current (mA) 90 50 30 0 -40 ilh1523bb_00 -20 0 20 40 60 80 Ambient Temperature (C) Figure 1. Recommended Operating Conditions Package Dimensions in Inches (mm) DIP .380 (9.65) .100 (2.54) 6-.031 (6-.80) Dia. .100 (2.54) .250 (6.35) .360 (9.14) .250 (6.35) .300 (7.62) .018 (.46) .318 (8.08) .300 (7.62) .300 (7.62) .130 (3.30) .285 (7.24)Typ. ISO Method A i178017 .360 (9.14)Typ. Document Number 83822 Rev. 1.2, 05-Nov-03 www.vishay.com 3 LH1523BB/ BAC/ BACTR Vishay Semiconductors VISHAY SMD .380 (9.65) .100 (2.54) .100 (2.54) .250 (6.35) .375 (9.53) .075 (1.90) .018 (.46) .318 (8.08) .300 (7.62) .175 (4.45) .130 (3.30) .327 (8.31) .059 (1.50) i178018 ISO Method A .025 (.64)Typ. .010 (.25)Typ. www.vishay.com 4 Document Number 83822 Rev. 1.2, 05-Nov-03 VISHAY LH1523BB/ BAC/ BACTR Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 83822 Rev. 1.2, 05-Nov-03 www.vishay.com 5 |
Price & Availability of LH1523BACTR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |