View SNJ55463JG_240522.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SN55461 THRU SN55463 SN75461 THRU SN75463 DUAL PERIPHERAL DRIVERS
SLRS022A - DECEMBER 1976 - REVISED OCTOBER 1995
PERIPHERAL DRIVERS FOR HIGH-VOLTAGE, HIGH-CURRENT DRIVER APPLICATIONS
SN55461, SN55462, SN55463 . . . JG PACKAGE SN75461, SN75462, SN75463 . . . D OR P PACKAGE (TOP VIEW)
* * * * * * * * *
Characterized for Use to 300 mA High-Voltage Outputs No Output Latch-Up at 30 V (After Conducting 300 mA) Medium-Speed Switching Circuit Flexibility for Varied Applications and Choice of Logic Function TTL-Compatible Diode-Clamped Inputs Standard Supply Voltages Plastic DIP (P) With Copper Lead Frame for Cooler Operation and Improved Reliability Package Options Include Plastic Small Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs
SUMMARY OF SERIES 55461/75461 DEVICE SN55461 SN55462 SN55463 SN75461 SN75462 SN75463 LOGIC AND NAND OR AND NAND OR PACKAGES FK, JG FK, JG FK, JG D, P D, P D, P
1A 1B 1Y GND
1 2 3 4
8 7 6 5
VCC 2B 2A 2Y
SN55461, SN55462, SN55463 . . . FK PACKAGE (TOP VIEW)
NC 1B NC 1Y NC
4 5 6 7 8
3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
NC 1A NC VCC NC NC 2B NC 2A NC
NC - No internal connection
Copyright (c) 1995, Texas Instruments Incorporated
description
These dual peripheral drivers are functionally interchangeable with SN55451B through SN55453B and SN75451B through SN75453B peripheral drivers, but are designed for use in systems that require higher breakdown voltages than those devices can provide at the expense of slightly slower switching speeds. Typical applications include logic buffers, power drivers, relay drivers, lamp drivers, MOS drivers, line drivers, and memory drivers. The SN55461/SN75461, SN55462/SN75462, and SN55463/SN75463 are dual peripheral AND, NAND, and OR drivers respectively (assuming positive logic), with the output of the gates internally connected to the bases of the npn output transistors. Series SN55461 drivers are characterized for operation over the full military temperature range of - 55C to 125C. Series SN75461 drivers are characterized for operation from 0C to 70C.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
NC GND NC 2Y NC
1
SN55461 THRU SN55463 SN75461 THRU SN75463 DUAL PERIPHERAL DRIVERS
SLRS022A - DECEMBER 1976 - REVISED OCTOBER 1995
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
SN55' Supply voltage, VCC (see Note 1) Input voltage, VI Intermitter voltage (see Note 2) Off-state output voltage, VO Continuous collector or output current (see Note 3) Peak collector or output current (tw 10 ms, duty cycle 50%, see Note 4) ms 50% Continuous total power dissipation Operating free-air temperature range, TA Storage temperature range, Tstg Case temperature for 60 seconds, TC Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds FK package JG package 7 5.5 5.5 35 400 500 SN75' 7 5.5 5.5 35 400 500 UNIT V V V V mA mA C C C C
See Dissipation Rating Table - 55 to 125 - 65 to 150 260 300 0 to 70 - 65 to 150
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package 260 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Voltage values are with respect to network GND unless otherwise specified. 2. This is the voltage between two emitters A and B. 3. This value applies when the base-emitter resistance (RBE) is equal to or less than 500 . 4. Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time interval must fall within the continuous dissipation rating. DISSIPATION RATING TABLE PACKAGE D FK JG P TA 25C POWER RATING 725 mW 1375 mW 1050 mW 1000 mW DERATING FACTOR ABOVE TA = 25C 5.8 mW/C 11.0 mW/C 8.4 mW/C 8.0 mW/C TA = 70C POWER RATING 464 mW 880 mW 672 mW 640 mW TA = 125C POWER RATING - 275 mW 210 mW -
recommended operating conditions
SN55' MIN Supply voltage, VCC High-level input voltage, VIH Low-level input voltage, VIL Operating free-air temperature, TA - 55 4.5 2 0.8 125 0 NOM 5 MAX 5.5 MIN 4.75 2 0.8 70 SN75' NOM 5 MAX 5.25 UNIT V V V C
2
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
SN55461 THRU SN55463 SN75461 THRU SN75463 DUAL PERIPHERAL DRIVERS
SLRS022A - DECEMBER 1976 - REVISED OCTOBER 1995
logic symbol
1A 1B 2A 2B 1 2 6 7 & 3 1Y
logic diagram (positive logic)
1A 1B 2Y 2A 2B 1 2 6 7 4 GND 5 2Y 3 1Y
5
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for D, JG, and P packages. FUNCTION TABLE (each driver) A L L H H B L H L H Y L (on state) L (on state) L (on state) H (off state) A B
schematic (each driver)
VCC 4 k 1.6 k 130
Y
positive logic: Y = AB or A + B
500 1 k GND Resistor values shown are nominal.
electrical characteristics over recommended operating free-air temperature range
PARAMETER VIK IOH Input clamp voltage High-level High level output current TEST CONDITIONS VCC = MIN, VCC = MIN, , VOH = 35 V II = - 12 mA VIH = MIN, , MIN SN55461 TYP MAX - 1.2 - 1.5 300 0 25 0.25 0.5 05 05 0.5 0.8 08 1 40 -1 8 - 1.6 11 -1 8 0 25 0.25 0.5 05 MIN SN75461 TYP MAX - 1.2 - 1.5 100 04 0.4 V 0.7 07 1 40 - 1.6 11 76 mA A mA mA mA UNIT V A
VOL
Low-level Low level output voltage
VCC = MIN, VIL = 0.8 V, , , IOL = 100 mA VCC = MIN, VIL = 0.8 V, , , IOL = 300 mA
II IIH IIL ICCH
Input current at maximum input voltage High-level input current Low-level input current Supply current, outputs high
VCC = MAX, VCC = MAX, VCC = MAX, VCC = MAX,
VI = 5.5 V VI = 2.4 V VI = 0.4 V VI = 5 V
ICCL Supply current, outputs low VCC = MAX, VI = 0 56 76 56 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C.
switching characteristics, VCC = 5 V, TA = 25C
PARAMETER tPLH tPHL tTLH tTHL VOH Propagation delay time, low-to-high-level output Propagation delay time, high-to-low-level output Transition time, low-to-high-level output Transition time, high-to-low-level output High-level High level output voltage after switching SN55461 SN75461 VS = 30 V, See Figure 2 IO 300 mA, VS - 10 IO 200 mA, , RL = 50 , CL = 15 pF, , See Figure 1 TEST CONDITIONS MIN TYP 30 25 8 10 VS - 10 MAX 55 40 20 20 mV ns UNIT
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
3
SN55461 THRU SN55463 SN75461 THRU SN75463 DUAL PERIPHERAL DRIVERS
SLRS022A - DECEMBER 1976 - REVISED OCTOBER 1995
logic symbol
1A 1B 2A 2B 1 2 6 7 & 3 1Y
logic diagram (positive logic)
1A 1B 2Y 2A 2B 1 2 6 7 4 GND 5 2Y 3 1Y
5
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for D, JG, and P packages. FUNCTION TABLE (each driver) A L L H H B L H L H Y H (off state) H (off state) H (off state) L (on state) A B 1 k 1 k
schematic (each driver)
4 k 1.6 k 1.6 k VCC 130
Y
positive logic: Y = AB or A + B
500 GND
Resistor values shown are nominal.
electrical characteristics over recommended operating free-air temperature range
PARAMETER VIK IOH Input clamp voltage High-level High level output current TEST CONDITIONS VCC = MIN, VCC = MIN, , VOH = 35 V II = - 12 mA VIL = 0.8 V, , MIN SN55462 TYP MAX - 1.2 - 1.5 300 0.25 0 25 0.5 05 0.5 05 0.8 08 1 40 - 1.1 13 - 1.6 17 - 1.1 13 0.25 0 25 0.5 05 MIN SN75462 TYP MAX - 1.2 - 1.5 100 0.4 04 V 0.7 07 1 40 - 1.6 17 76 mA A mA mA mA UNIT V A
VOL
Low-level Low level output voltage
VCC = MIN, VIH = MIN, , , IOL = 100 mA VCC = MIN, VIH = MIN, , , IOL = 300 mA
II IIH IIL ICCH
Input current at maximum input voltage High-level input current Low-level input current Supply current, outputs high
VCC = MAX, VCC = MAX, VCC = MAX, VCC = MAX,
VI = 5.5 V VI = 2.4 V VI = 0.4 V VI = 0
ICCL Supply current, outputs low VCC = MAX, VI = 5 V 61 76 61 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C.
switching characteristics, VCC = 5 V, TA = 25C
PARAMETER tPLH tPHL tTLH tTHL VOH Propagation delay time, low-to-high-level output Propagation delay time, high-to-low-level output Transition time, low-to-high-level output Transition time, high-to-low-level output High-level High level output voltage after switching SN55462 SN75462 VS = 30 V, See Figure 2 IO 300 mA, VS - 10 IO 200 mA, , RL = 50 , CL = 15 pF, , See Figure 1 TEST CONDITIONS MIN TYP 45 30 13 10 VS - 10 MAX 65 50 25 20 mV ns UNIT
4
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
SN55461 THRU SN55463 SN75461 THRU SN75463 DUAL PERIPHERAL DRIVERS
SLRS022A - DECEMBER 1976 - REVISED OCTOBER 1995
logic symbol
1A 1B 2A 2B 1 2 6 7 1 3 1Y
logic diagram (positive logic)
1A 1B 2Y 2A 2B 1 2 6 7 4 GND 5 2Y 3 1Y
5
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for D, JG, and P packages. FUNCTION TABLE (each driver) A L L H H B L H L H Y L (on state) H (off state) H (off state) H (off state) A B 1 k Resistor values shown are nominal.
schematic (each driver)
VCC 4 k 1.6 k 4 k 130
Y
positive logic: Y = A + B or A B
500 GND
electrical characteristics over recommended operating free-air temperature range
PARAMETER VIK IOH Input clamp voltage High-level High level output current TEST CONDITIONS VCC = MIN, VCC = MIN, , VOH = 35 V II = - 12 mA VIH = MIN, , MIN SN55463 MAX TYP - 1.2 - 1.5 300 0.25 0 25 0.5 05 0.5 05 0.8 08 1 40 -1 8 - 1.6 11 -1 8 0.25 0 25 0.5 05 MIN SN75463 MAX TYP - 1.2 - 1.5 100 0.4 04 V 0.7 07 1 40 - 1.6 11 76 mA A mA mA mA UNIT V A
VOL
Low-level Low level output voltage
VCC = MIN, VIL = 0.8 V, , , IOL = 100 mA VCC = MIN, VIL = 0.8 V, , , IOL = 300 mA
II IIH IIL ICCH
Input current at maximum input voltage High-level input current Low-level input current Supply current, outputs high
VCC = MAX, VCC = MAX, VCC = MAX, VCC = MAX,
VI = 5.5 V VI = 2.4 V VI = 0.4 V VI = 5 V
ICCL Supply current, outputs low VCC = MAX, VI = 0 58 76 58 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. All typical values are at VCC = 5 V, TA = 25C.
switching characteristics, VCC = 5 V, TA = 25C
PARAMETER tPLH tPHL tTLH tTHL VOH Propagation delay time, low-to-high-level output Propagation delay time, high-to-low-level output Transition time, low-to-high-level output Transition time, high-to-low-level output High level output voltage after switching High-level SN55463 SN75463 VS = 30 V, See Figure 2 IO 300 mA, VS - 10 IO 200 mA, , RL = 50 , CL = 15 pF, , See Figure 1 TEST CONDITIONS MIN TYP 30 25 8 10 VS - 10 MAX 55 40 25 25 mV ns UNIT
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
5
SN55461 THRU SN55463 SN75461 THRU SN75463 DUAL PERIPHERAL DRIVERS
SLRS022A - DECEMBER 1976 - REVISED OCTOBER 1995
PARAMETER MEASUREMENT INFORMATION
5 ns Input 2.4 V '461 '462 Pulse Generator (see Note A) 10 V RL = 50 Output Circuit Under Test (see Note B) Input '461 '463 90% 1.5 V 10% 10% 0.5 s 90% 1.5 V 10% tPHL '463 0.4 V TEST CIRCUIT NOTES: A. The pulse generator has the following characteristics: PRR 1 MHz, ZO 50 . B. CL includes probe and jig capacitance. GND SUB 90% Output tTHL VOLTAGE WAVEFORMS 50% 10% 50% 10% VOL tTLH 90% 1.5 V 10% tPLH 90% 10 ns 3V 10 ns 90% 1.5 V 3V
0V
5 ns Input '462
CL = 15 pF (see Note B)
0V VOH
Figure 1. Test Circuit and Voltage Waveforms for Switching Times
VS = 30 V 2 mH 65 Output Circuit Under Test (see Note B) 5 ns Input '462 CL = 15 pF (see Note B) 10% 90% 1.5 V 5 ns Input '461 '463 90% 1.5 V 10% 10% 40 s 90% 1.5 V 10% 0V VOH '463 0.4 V TEST CIRCUIT VOLTAGE WAVEFORMS GND SUB Output VOL 0V 10 ns 3V 10 ns 90% 1.5 V 3V
Input
2.4 V '461 '462
5V 1N3064
Pulse Generator (see Note A)
NOTES: A. The pulse generator has the following characteristics: PRR 12.5 kHz, ZO = 50 . B. CL includes probe and jig capacitance.
Figure 2. Test Circuit and Voltage Waveforms for Latch-Up Test
6
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
17-Oct-2005
PACKAGING INFORMATION
Orderable Device JM38510/12908BPA JM38510/12909BPA SN55461JG SN55462JG SN55463JG SN75461D SN75461P SN75462D SN75462DE4 SN75462DR SN75462DRE4 SN75462P SN75462PE4 SN75463D SN75463DR SN75463P SN75463PE4 SNJ55461FK SNJ55461JG SNJ55462FK SNJ55462JG SNJ55463JG
(1)
Status (1) ACTIVE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE OBSOLETE ACTIVE ACTIVE OBSOLETE OBSOLETE ACTIVE ACTIVE OBSOLETE
Package Type CDIP CDIP CDIP CDIP CDIP SOIC PDIP SOIC SOIC SOIC SOIC PDIP PDIP SOIC SOIC PDIP PDIP LCCC CDIP LCCC CDIP CDIP
Package Drawing JG JG JG JG JG D P D D D D P P D D P P FK JG FK JG JG
Pins Package Eco Plan (2) Qty 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 20 8 20 8 8 1 1 50 50 75 75 1 TBD TBD TBD TBD TBD TBD TBD Green (RoHS & no Sb/Br) Green (RoHS & no Sb/Br)
Lead/Ball Finish A42 SNPB Call TI Call TI Call TI Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI Call TI CU NIPDAU CU NIPDAU Call TI Call TI A42 SNPB Call TI
MSL Peak Temp (3) Level-NC-NC-NC Call TI Call TI Call TI Call TI Call TI Call TI Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-1-260C-UNLIM Level-NC-NC-NC Level-NC-NC-NC Call TI Call TI Level-NC-NC-NC Level-NC-NC-NC Call TI Call TI Level-NC-NC-NC Call TI
2500 Green (RoHS & no Sb/Br) 2500 Green (RoHS & no Sb/Br) 50 50 Pb-Free (RoHS) Pb-Free (RoHS) TBD TBD Pb-Free (RoHS) Pb-Free (RoHS) TBD TBD TBD TBD TBD
POST-PLATE Level-NC-NC-NC
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
17-Oct-2005
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MCER001A - JANUARY 1995 - REVISED JANUARY 1997
JG (R-GDIP-T8)
0.400 (10,16) 0.355 (9,00) 8 5
CERAMIC DUAL-IN-LINE
0.280 (7,11) 0.245 (6,22)
1
4 0.065 (1,65) 0.045 (1,14)
0.063 (1,60) 0.015 (0,38)
0.020 (0,51) MIN
0.310 (7,87) 0.290 (7,37)
0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN
0.023 (0,58) 0.015 (0,38) 0.100 (2,54) 0.014 (0,36) 0.008 (0,20)
0-15
4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MLCC006B - OCTOBER 1996
FK (S-CQCC-N**)
28 TERMINAL SHOWN
LEADLESS CERAMIC CHIP CARRIER
18
17
16
15
14
13
12
NO. OF TERMINALS ** 11 10 28 9 8 7 6 68 5 84 44 52 20
A MIN 0.342 (8,69) 0.442 (11,23) 0.640 (16,26) 0.739 (18,78) 0.938 (23,83) 1.141 (28,99) MAX 0.358 (9,09) 0.458 (11,63) 0.660 (16,76) 0.761 (19,32) 0.962 (24,43) 1.165 (29,59) MIN 0.307 (7,80) 0.406 (10,31) 0.495 (12,58) 0.495 (12,58) 0.850 (21,6) 1.047 (26,6)
B MAX 0.358 (9,09) 0.458 (11,63) 0.560 (14,22) 0.560 (14,22) 0.858 (21,8) 1.063 (27,0)
19 20 21 B SQ 22 A SQ 23 24 25
26
27
28
1
2
3
4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25)
0.020 (0,51) 0.010 (0,25)
0.055 (1,40) 0.045 (1,14)
0.045 (1,14) 0.035 (0,89)
0.028 (0,71) 0.022 (0,54) 0.050 (1,27)
0.045 (1,14) 0.035 (0,89)
4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MPDI001A - JANUARY 1995 - REVISED JUNE 1999
P (R-PDIP-T8)
0.400 (10,60) 0.355 (9,02) 8 5
PLASTIC DUAL-IN-LINE
0.260 (6,60) 0.240 (6,10)
1
4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.015 (0,38) 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.010 (0,25) NOM Gage Plane
0.020 (0,51) MIN
0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.010 (0,25) M
0.430 (10,92) MAX
4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless

▲Up To Search▲

Price & Availability of SNJ55463JG

	To Download SNJ55463JG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .