![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
INTEGRATED CIRCUITS 74F456 Octal buffer/driver with parity, non-inverting (3-State) Product specification Supersedes data of 1999 Jan 08 IC15 Data Handbook 2000 Aug 01 Philips Semiconductors Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 FEATURES * High impedance NPN base inputs for reduced loading (40A in High and Low states) DESCRIPTION The 74F456 is an octal buffer and line driver with parity generation/checking designed to be employed as memory address drivers, clock drivers and bus-oriented transmitters/receivers. These parts include parity generator/checker to improve PC board density. TYPICAL PROPAGATION DELAY 7.5ns * 74F456 combines 74F244 and 74F280A functions in one package * 74F456 is a center pin version of the 74F656A * Non-Inverting * 3-State outputs sink 64mA and source 15mA * 24-pin plastic Slim DIP (300 mil) package * Broadside pinout simplifies PC board layout TYPE 74F456 TYPICAL SUPPLY CURRENT (TOTAL) 64mA ORDERING INFORMATION DESCRIPTION COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C N74F456N N74F456D PKG DWG # 24-pin plastic Slim DIP (300mil) 24-pin plastic SOL SOT222-1 SOT137-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS D0-D7 PI OE0, OE1 E, O Data inputs Parity input Output Enable inputs (active Low) Parity outputs DESCRIPTION 74F(U.L.) HIGH/LOW 2.0/0.066 1.0/0.033 1.0/0.033 750/106.7 LOAD VALUE HIGH/LOW 40A/40A 20A/20A 20A/20A 15mA/64mA 15mA/64mA Q0-Q7 Data outputs 750/106.7 NOTE: One (1.0) FAST Unit Load (U.L.) is defined as 20A in the High state and 0.6mA in the Low state. PIN CONFIGURATION OE0 OE1 PI D0 D1 D2 VCC D3 D4 D5 D6 D7 1 2 3 4 5 6 7 8 9 10 11 12 24 O 23 E 22 Q0 21 Q1 20 Q2 19 GND 18 GND 17 Q3 16 Q4 15 Q5 14 Q6 13 Q7 LOGIC SYMBOL 4 5 6 8 9 10 11 12 D0 3 1 2 PI OE0 D1 D2 D3 D4 D5 D6 D7 E O 23 24 OE1 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 22 VCC = Pin 7 GND = Pin 18, 19 21 20 17 16 15 14 13 SF00960 SF00958 2000 Aug 01 2 853-0371 24250 Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 LOGIC SYMBOL (IEEE/IEC) 3,5,6,7,8 9,10,11,12 3 1 2 4 5 6 8 9 10 11 12 P3 1 EN4 22 21 20 17 16 15 14 13 3,5,6,7,8 9,10,11,12 2K [EVEN] [ODD] 23 24 Z5 Z6 Z7 Z8 Z9 Z10 Z11 Z12 4 SF00962 FUNCTION TABLE INPUTS OE0 L L H X H L Z X = = = = OE1 L L X H Dn L H X X OUTPUTS Qn L H Z Z FUNCTION TABLE for PARITY OUTPUTS INPUTS Number of inputs, High (PI, D0 - D7) Even - 0, 2, 4, 6, 8 Odd - 1, 3, 5, 7, 9 Any OEn = High H L Z X = = = = High voltage level Low voltage level High impedance "off" state Don't care E H L Z OUTPUTS O L H Z High voltage level Low voltage level High impedance "off" state Don't care 2000 Aug 01 3 Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 LOGIC DIAGRAM PI 3 23 E 24 O D0 4 22 Q0 21 Q1 20 Q2 17 Q3 16 Q4 15 Q5 14 Q6 13 Q7 D1 5 D2 6 D3 8 D4 9 D5 10 D6 11 12 1 2 D7 OE0 OE1 VCC = Pin 7 GND = Pin 18, 19 SF00964 2000 Aug 01 4 Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 ABSOLUTE MAXIMUM RATINGS (Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in High output state Current applied to output in Low output state Operating free-air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to +VCC 128 0 to +70 -65 to +150 UNIT V V mA V mA C C RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL VCC VIH VIL IIK IOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature range 0 PARAMETER MIN 4.5 2.0 0.8 -18 -15 64 70 NOM 5.0 MAX 5.5 V V V mA mA mA C UNIT 2000 Aug 01 5 Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS1 10%VCC 5%VCC 10%VCC 10%VCC IO = MAX OL 5%VCC 0.42 -0.73 LIMITS MIN 2.4 2.7 2.0 0.55 0.55 -1.2 100 40 VCC = MAX, VI = 2 7V MAX 2.7V 20 -40 VCC = MAX, VI = 0 5V MAX 0.5V VCC = MAX, VO = 2.7V VCC = MAX, VO = 0.5V VCC = MAX ICCH ICC Supply current (total) ICCL ICCZ VCC = MAX -100 50 78 63 -20 50 -50 -225 80 110 90 3.3 TYP2 MAX UNIT V V V V V V A A A A A A A mA mA mA mA VOH High-level output voltage VCC = MIN, MIN VIL = MAX, VIH = MIN VCC = MIN, VIL = MAX MAX, VIH = MIN IO = 3mA OH=-3mA IOH =-15mA VO OL VIK II IIH Low-level Low level output voltage Input clamp voltage Input current at maximum input voltage Dn High-level High level input current Pl, OEn Dn Low-level Low level input current Pl, OEn Off-state output current High-level voltage applied Off-state output current Low-level voltage applied Short-circuit output current3 VCC = MIN, II = IIK VCC = 0.0V, VI = 7.0V IIL IOZH IOZL IOS NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITION VCC = +5V Tamb = +25C CL = 50pF, RL = 500 MIN tPLH tPHL tPLH tPHL tPZH tPZL tPHZ tPLZ Propagation delay Dn to Qn Propagation delay Dn to SE, SO Output Enable time to High or Low level Output Disable time from High or Low level Waveform 1 Waveform 1, 2 Waveform 3 Waveform 4 Waveform 3 Waveform 4 2.0 2.5 5.5 5.5 2.5 4.0 1.5 2.0 TYP 4.5 5.0 10.0 11.0 4.0 8.0 4.0 5.0 MAX 6.5 7.0 13.0 14.5 8.0 10.5 6.5 7.5 VCC = +5V 10% Tamb = 0C to +70C CL = 50pF, RL = 500 MIN 2.0 2.5 5.5 5.5 2.5 4.0 1.5 2.0 MAX 7.0 7.5 14.0 16.5 9.0 11.5 7.5 8.0 ns ns ns ns UNIT 2000 Aug 01 6 Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 AC WAVEFORMS For all waveforms, VM = 1.5V. Dn VM tPLH VM tPHL VM VM Dn VM tPHL VM tPLH VM VM SE, SO, Qn SE, SO, Qn SF00965 SF00966 Waveform 1. Propagation Delay, Non-Inverting Outputs Waveform 2. Propagation Delay, Inverting Outputs OEn VM tPZH VM tPHZ VM 0V VOH -0.3V OEn VM tPZL VM tPLZ VM VOL +0.3V SE, SO, Qn, Qn SE, SO, Qn, Qn SF00967 SF00968 Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level TEST CIRCUIT AND WAVEFORMS VCC 7.0V VIN PULSE GENERATOR RT D.U.T. VOUT RL NEGATIVE PULSE 90% VM 10% tTHL (tf ) CL RL tTLH (tr ) 90% POSITIVE PULSE 10% tTHL (tf ) AMP (V) 90% VM tw 10% 0V tw VM 10% tTLH (tr ) 0V AMP (V) 90% Test Circuit for 3-State Outputs SWITCH POSITION TEST tPLZ tPZL All other SWITCH closed closed open VM Input Pulse Definition DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate 1MHz tw 500ns tTLH 2.5ns tTHL 2.5ns SF00777 2000 Aug 01 7 Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 DIP24: plastic dual in-line package; 24 leads (300 mil) SOT222-1 2000 Aug 01 8 Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1 2000 Aug 01 9 Philips Semiconductors Product specification Octal buffer/driver with parity, non-inverting (3-State) 74F456 Data sheet status Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 2000 All rights reserved. Printed in U.S.A. Date of release: 08-00 Document order number: 9397-750 -07378 Philips Semiconductors yyyy mmm dd 10 |
Price & Availability of 74F456
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |