View SN74HCT245_248732.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SN54HCT245, SN74HCT245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SCLS020E - MARCH 1984 - REVISED AUGUST 2003
D D D D D D D
Operating Voltage Range of 4.5 V to 5.5 V High-Current 3-State Outputs Drive Bus Lines Directly or Up To 15 LSTTL Loads Low Power Consumption, 80-A Max ICC Typical tpd = 14 ns 6-mA Output Drive at 5 V Low Input Current of 1 A Max Inputs Are TTL-Voltage Compatible
SN54HCT245 . . . J OR W PACKAGE SN74HCT245 . . . DB, DW, N, NS, OR PW PACKAGE (TOP VIEW)
description/ordering information
These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The 'HCT245 devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
DIR A1 A2 A3 A4 A5 A6 A7 A8 GND
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
VCC OE B1 B2 B3 B4 B5 B6 B7 B8
SN54HCT245 . . . FK PACKAGE (TOP VIEW)
A2 A1 DIR VCC OE A3 A4 A5 A6 A7
4 5 6 7 8 3 2 1 20 19 18 17 16 15 14 9 10 11 12 13
B1 B2 B3 B4 B5
ORDERING INFORMATION
TA PDIP - N SOIC - DW -40C 85C -40 C to 85 C SOP - NS SSOP - DB TSSOP - PW CDIP - J -55C to 125 C -55 C 125C CFP - W LCCC - FK PACKAGE Tube of 20 Tube of 25 Reel of 2000 Reel of 2000 Reel of 2000 Tube of 70 Reel of 2000 Reel of 250 Tube of 20 Tube of 85 Tube of 55 ORDERABLE PART NUMBER SN74HCT245N SN74HCT245DW SN74HCT245DWR SN74HCT245NSR SN74HCT245DBR SN74HCT245PW SN74HCT245PWR SN74HCT245PWT SNJ54HCT245J SNJ54HCT245W SNJ54HCT245FK SNJ54HCT245J SNJ54HCT245W HT245 TOP-SIDE MARKING SN74HCT245N HCT245 HCT245 HT245
SNJ54HCT245FK Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2003, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
A8 GND B8 B7 B6
1
SN54HCT245, SN74HCT245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SCLS020E - MARCH 1984 - REVISED AUGUST 2003
FUNCTION TABLE INPUTS OE L L H DIR L H X OPERATION B data to A bus A data to B bus Isolation
logic diagram (positive logic)
DIR 1 19
OE
A1
2
18
B1
To Seven Other Channels
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 7 V Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 mA Package thermal impedance, JA (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70C/W DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
SN54HCT245, SN74HCT245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SCLS020E - MARCH 1984 - REVISED AUGUST 2003
recommended operating conditions (see Note 3)
SN54HCT245 MIN VCC VIH VIL VI VO t/v Supply voltage High-level input voltage Low-level input voltage Input voltage Output voltage Input transition rise/fall time VCC = 4.5 V to 5.5 V VCC = 4.5 V to 5.5 V 4.5 2 0.8 0 0 VCC VCC 500 0 0 NOM 5 MAX 5.5 SN74HCT245 MIN 4.5 2 0.8 VCC VCC 500 NOM 5 MAX 5.5 UNIT V V V V V ns
TA Operating free-air temperature -55 125 -40 85 C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER VOH VOL II IOZ ICC ICC Ci DIR or OE DIR or OE A or B TEST CONDITIONS VI = VIH or VIL VI = VIH or VIL VI = VCC or 0 VO = VCC or 0 VI = VCC or 0, IO = 0 One input at 0.5 V or 2.4 V, Other inputs at 0 or VCC IOH = -20 A IOH = -6 mA IOL = 20 A IOL = 6 mA VCC 4.5 V 4.5 V 5.5 V 5.5 V 5.5 V 5.5 V 4.5 V to 5.5 V 1.4 3 MIN 4.4 3.98 TA = 25C TYP MAX 4.499 4.3 0.001 0.17 0.1 0.01 0.1 0.26 100 0.5 8 2.4 10 SN54HCT245 MIN 4.4 3.7 0.1 0.4 1000 10 160 3 10 MAX SN74HCT245 MIN 4.4 3.84 0.1 0.33 1000 5 80 2.9 10 MAX UNIT V V nA A A mA pF
This is the increase in supply current for each input that is at one of the specified TTL voltage levels, rather than 0 V or VCC. Parameter Ci does not apply to transceiver I/O ports.
switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1)
PARAMETER tpd ten tdis tt FROM (INPUT) A or B TO (OUTPUT) B or A A or B A or B A or B VCC 4.5 V 5.5 V 4.5 V 5.5 V 4.5 V 5.5 V 4.5 V 5.5 V MIN TA = 25C TYP MAX 16 14 25 22 26 23 9 8 22 20 46 41 40 36 12 11 SN54HCT245 MIN MAX 33 30 69 62 60 54 18 16 SN74HCT245 MIN MAX 28 25 58 52 50 45 15 14 UNIT ns ns ns ns
OE OE
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
3
SN54HCT245, SN74HCT245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SCLS020E - MARCH 1984 - REVISED AUGUST 2003
switching characteristics over recommended operating free-air temperature range, CL = 150 pF (unless otherwise noted) (see Figure 1)
PARAMETER tpd ten tt FROM (INPUT) A or B TO (OUTPUT) B or A A or B A or B VCC 4.5 V 5.5 V 4.5 V 5.5 V 4.5 V 5.5 V MIN TA = 25C TYP MAX 20 18 36 30 17 14 30 27 59 53 42 38 SN54HCT245 MIN MAX 45 41 89 80 63 57 SN74HCT245 MIN MAX 38 34 74 67 53 48 UNIT ns ns ns
OE
operating characteristics, TA = 25C
PARAMETER Cpd Power dissipation capacitance per transceiver TEST CONDITIONS No load TYP 40 UNIT pF
4
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
SN54HCT245, SN74HCT245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SCLS020E - MARCH 1984 - REVISED AUGUST 2003
PARAMETER MEASUREMENT INFORMATION
VCC S1 RL PARAMETER ten tPZH tPZL tPHZ tPLZ 1 k RL 1 k CL 50 pF or 150 pF 50 pF 50 pF or 150 pF S1 Open Closed Open Closed -- Open S2 Closed Open Closed Open Open
From Output Under Test CL (see Note A)
Test Point
S2
tdis
tpd or tt LOAD CIRCUIT
Input 1.3 V 0.3 V
2.7 V
2.7 V
3V 1.3 V 0.3 V 0 V tf
tr VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES 3V Input 1.3 V tPLH In-Phase Output 1.3 V 10% tPHL Out-ofPhase Output 90% 1.3 V 10% tf 90% tr tPLH 1.3 V 10% 90% tr VOH VOL 1.3 V 0V tPHL 90% VOH 1.3 V 10% V OL tf Output Control (Low-Level Enabling)
3V 1.3 V tPZL 1.3 V 0V tPLZ VCC 1.3 V 10% tPHZ 1.3 V 90% VOH 0 V VOL
Output Waveform 1 (See Note B) tPZH Output Waveform 2 (See Note B)
VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT RISE AND FALL TIMES
VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES FOR 3-STATE OUTPUTS
NOTES: A. CL includes probe and test-fixture capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr = 6 ns, tf = 6 ns. D. The outputs are measured one at a time with one input transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd.
Figure 1. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
5
PACKAGE OPTION ADDENDUM
www.ti.com
28-Feb-2005
PACKAGING INFORMATION
Orderable Device 5962-8550601VRA 5962-8550601VSA 85506012A 8550601RA JM38510/65553BRA JM38510/65553BSA SN54HCT245J SN74HCT245DBLE SN74HCT245DBR SN74HCT245DW SN74HCT245DWR SN74HCT245N SN74HCT245N3 SN74HCT245NSR SN74HCT245PW SN74HCT245PWLE SN74HCT245PWR SN74HCT245PWT SNJ54HCT245FK SNJ54HCT245J SNJ54HCT245W
(1)
Status (1) ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE
Package Type CDIP CFP LCCC CDIP CDIP CFP CDIP SSOP SSOP SOIC SOIC PDIP PDIP SO TSSOP TSSOP TSSOP TSSOP LCCC CDIP CFP
Package Drawing J W FK J J W J DB DB DW DW N N NS PW PW PW PW FK J W
Pins Package Eco Plan (2) Qty 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 2000 250 1 1 1 2000 70 2000 25 2000 20 1 1 1 1 1 1 1 None None None None None None None None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) None None None
Lead/Ball Finish Call TI Call TI Call TI Call TI Call TI Call TI Call TI Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU Call TI Call TI Call TI
MSL Peak Temp (3) Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC Call TI Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR/ Level-1-235C-UNLIM Level-NC-NC-NC Call TI Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-1-250C-UNLIM Call TI Level-1-250C-UNLIM Level-1-250C-UNLIM Level-NC-NC-NC Level-NC-NC-NC Level-NC-NC-NC
The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
28-Feb-2005
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MLCC006B - OCTOBER 1996
FK (S-CQCC-N**)
28 TERMINAL SHOWN
LEADLESS CERAMIC CHIP CARRIER
18
17
16
15
14
13
12
NO. OF TERMINALS ** 11 10 28 9 8 7 6 68 5 84 44 52 20
A MIN 0.342 (8,69) 0.442 (11,23) 0.640 (16,26) 0.739 (18,78) 0.938 (23,83) 1.141 (28,99) MAX 0.358 (9,09) 0.458 (11,63) 0.660 (16,76) 0.761 (19,32) 0.962 (24,43) 1.165 (29,59) MIN 0.307 (7,80) 0.406 (10,31) 0.495 (12,58) 0.495 (12,58) 0.850 (21,6) 1.047 (26,6)
B MAX 0.358 (9,09) 0.458 (11,63) 0.560 (14,22) 0.560 (14,22) 0.858 (21,8) 1.063 (27,0)
19 20 21 B SQ 22 A SQ 23 24 25
26
27
28
1
2
3
4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25)
0.020 (0,51) 0.010 (0,25)
0.055 (1,40) 0.045 (1,14)
0.045 (1,14) 0.035 (0,89)
0.028 (0,71) 0.022 (0,54) 0.050 (1,27)
0.045 (1,14) 0.035 (0,89)
4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001
DB (R-PDSO-G**)
28 PINS SHOWN 0,65 28 0,38 0,22 15 0,15 M
PLASTIC SMALL-OUTLINE
0,25 0,09 5,60 5,00 8,20 7,40
Gage Plane 1 A 14 0- 8 0,25 0,95 0,55
Seating Plane 2,00 MAX 0,05 MIN 0,10
PINS ** DIM A MAX
14
16
20
24
28
30
38
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30 4040065 /E 12/01
NOTES: A. B. C. D.
All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C - JANUARY 1995 - REVISED FEBRUARY 1999
PW (R-PDSO-G**)
14 PINS SHOWN
PLASTIC SMALL-OUTLINE PACKAGE
0,65 14 8
0,30 0,19
0,10 M
0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 A 7 0- 8 0,75 0,50
Seating Plane 1,20 MAX 0,15 0,05 0,10
PINS ** DIM A MAX
8
14
16
20
24
28
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless

▲Up To Search▲

Price & Availability of SN74HCT245

	To Download SN74HCT245 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .