 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PHOTOCOUPLER KB817 GENERAL PURPOSE HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE PHOTOCOUPLER SERIES FEATURES 1.High isolation voltage between input and output (Viso=5000 Vrms). 2.Compact dual-in-line package KB817:1-channel type 3.Recognized by UL and CUL, file NO.E225308. 4.Approved by VDE 0884 Teil2(NO:40006364) (Creepage distance between input and output:7mm or more). 5.Rohs compliant. DESCRIPTION 1.The KB817 (1-channel) is optically coupled isolators containing a GaAS light emitting diode and an NPN silicon phototransistor. 2.The lead pitch is 2.54mm. 3.Solid insulation thickness between emitting diode and output phototransistor:>=0.6mm. APPLICATIONS 1.Computer terminals. 2.Registers,copiers,automatic vending machines. 3.System appliances, measuring instruments. 4.Programmable logic controller. 5.Signal transmission between circuits of different potentials and impedances. SPEC NO: DSAD1549 APPROVED: J. Lu REV NO: V.7 CHECKED: Tracy Deng DATE: APR/07/2005 DRAWN: B.H.LI PAGE: 1 OF 8 ERP: 1205000006 PHOTOCOUPLER KB817 *PACKAGE DIMENSIONS (UNIT:mm) * DIP Type TOLERANCE : 0.5[0 0.02] UNLESS OTHERWISE NOTED. 0 KB817 Top View 2.54 [0.1] 0.25 6.5 [0.256] Internal connection diagram 4 3 CTR rank mark 4 KB817 3 Anode mark 1 2 0.9 [0.035] 0.2 1.2 [0.047] 0.3 3.5 [0.138] 2.7 [0.106] 1 2 7 [0.276] 3 [0.118] 0.4[0.015]MIN. 7.62 [0.3] 0.3 4.58 [0.18] 0.5 [0.02] 0.1 0.25 [0.01] 0.1 = 0 to 13 1. Anode 2. Cathode 3. Emitter 4. Collector *Absolute Maximum Ratings (Ta=25C) Parameter Forward current Input Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Output Collector current Collector power dissipation Total power dissipation *1 Symbol IF VR P VC E O VE C O IC PC Ptot Viso Topr Tstg Tsol Isolation voltage Operating temperature Storage temperature *2 Soldering temperature 40 to 60% RH,AC for 1 minute. For 10 seconds. *1 *2 SPEC NO: DSAD1549 APPROVED: J. Lu REV NO: V.7 CHECKED: Tracy Deng DATE: APR/07/2005 DRAWN: B.H.LI Rating 50 6 70 35 6 50 150 200 5000 -30~+100 -55~+125 260 Unit mA V mW V V mA mW mW Vrms C C C PAGE: 2 OF 8 ERP: 1205000006 PHOTOCOUPLER KB817 *Electro-optical Characteristics Parameter Forward voltage Input Peak forward voltage Reverse current Output Collector dark current *1Current Symbol VF VFM IR ICEO CTR VCE(sat) fc Conditions I F=20mA I FM=0.5A VR=4V VCE =20V,I F=0mA I F=5mA,VCE=5V I F=20mA, I C=1mA VCE=5V, IC=2mA RL=100,-3dB VCE=2V, IC=2mA RL=100 Min. ___ ___ ___ ___ 50 ___ ___ ___ ___ Typ. 1.2 ___ ___ ___ ___ 0.1 80 4 3 Max. 1.4 3.0 10 10-7 600 0.2 ___ 18 18 Unit V V A A nA % transfer ratio Transfer characteristics Collector-emitter saturation voltage C ut-o ff fre q ue ncy Rise time Response time Fall time KHz s s tr tf Classification table of current transfer ratio is shown below. Ic CTR= I F X 100% Model No. KB817L KB817A KB817B KB817C KB817D KB817AB KB817BC KB817CD KB817AC KB817BD KB817AD KB817 Rank mark L A B C D A or B B or C C or D A,B or C B,C or D A,B,C or D L,A,B,C,D or No mark CTR(% ) 50 to 100 80 to 160 130 to 260 200 to 400 300 to 600 80 to 260 130 to 400 200 to 600 80 to 400 130 to 600 80 to 600 50 to 600 SPEC NO: DSAD1549 APPROVED: J. Lu REV NO: V.7 CHECKED: Tracy Deng DATE: APR/07/2005 DRAWN: B.H.LI PAGE: 3 OF 8 ERP: 1205000006 PHOTOCOUPLER KB817 Fig. 1 Current Transfer Ratio vs. Forward Current Fig. 2 Forward Current vs. Forward voltage Fig. 3 Collector Current vs. Collector-emitter Voltage Fig. 4 Relative Current Transfer Ratio vs. Ambient Temperature Fig. 5 Collector-emitter Saturation Voltage vs. Ambient Temperature Fig. 6 Collector Dark Current vs. Ambient Temperature SPEC NO: DSAD1549 APPROVED: J. Lu REV NO: V.7 CHECKED: Tracy Deng DATE: APR/07/2005 DRAWN: B.H.LI PAGE: 4 OF 8 ERP: 1205000006 PHOTOCOUPLER KB817 Fig. 7 Forward Current vs. Ambient Temperature Fig. 8 Collector Power Dissipation vs. Ambient Temperature Fig. 9 Response Time vs. Load Resistance Test Circuit for Response Time Fig. 10 Frequency Response Test Circuit for Frequency Response SPEC NO: DSAD1549 APPROVED: J. Lu REV NO: V.7 CHECKED: Tracy Deng DATE: APR/07/2005 DRAWN: B.H.LI PAGE: 5 OF 8 ERP: 1205000006 PHOTOCOUPLER KB817 Fig. 11 Collector-emitter Saturation Voltage vs. Forward Current *NOTES ON HANDLING 1.Recommended soldering conditions (Dip soldering) (1) Dip soldering Temperature Time Cycle Flux 260 C or below (molten solder temperature) Less than 10 seconds. One cycle allowed to be dipped in solder including plastic mold portion. Rosin flux containing small amount of chorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2.Cautions regarding noise Be aware that power is suddenly into the componment any surge current may cause damage happen, even if the voltage is within the absolute maximum ratings. SPEC NO: DSAD1549 APPROVED: J. Lu REV NO: V.7 CHECKED: Tracy Deng DATE: APR/07/2005 DRAWN: B.H.LI PAGE: 6 OF 8 ERP: 1205000006 PHOTOCOUPLER KB817 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. RESTRICTIONS ON PRODUCT USE The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices / types available in every country. We are mention about our product quality stablity, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing KINGBRIGHT products, to observe standards of safety, and to a avoid situations in which a malfunction or failure of a KINGBRIGHT product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that KINGBRIGHT products are used within specified operating ranges as set forth in the most recent products specifications. SPEC NO: DSAD1549 APPROVED: J. Lu REV NO: V.7 CHECKED: Tracy Deng DATE: APR/07/2005 DRAWN: B.H.LI PAGE: 7 OF 8 ERP: 1205000006 PHOTOCOUPLER KB817 Dimension of Tube 5301.0 TOLERANCE : 0.4[0.012] UNLESS OTHERWISE NOTED. Unit:mm Dimension of Carton *ORDERING Part Number KB817 INFORMATION Package 4-pin DIP Package Style 100pcs/each tube SPEC NO: DSAD1549 APPROVED: J. Lu REV NO: V.7 CHECKED: Tracy Deng DATE: APR/07/2005 DRAWN: B.H.LI PAGE: 8 OF 8 ERP: 1205000006 |
Price & Availability of KB817C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |