 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1N4001 THRU 1N4007 PLASTIC SILICON RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES l Low forward voltage drop l High current capability l High reliability l High surge current capability l Exceeds environmental standards of MIL-S-19500/228 MECHANICAL DATA Case: Molded plastic , DO-41 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 75 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified 1.0 A Current .375"(9.5mm) Lead Length at TA=75 J Peak Forward Surge Current 8.3ms single 30 A half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A DC and 1.1 V 25 J Maximum Full Load Reverse Current Full 30 g A Cycle Average at 75 J Ambient 5.0 g A Maximum Reverse Current at TA=25 J 500 g A At Rated DC Blocking Voltage TA=100 J Typical Junction capacitance (Note 1) 15 PF Typical Thermal Resistance (Note 2) R KJA 50 J /W 25 J /W Typical Thermal resistance (NOTE 2) R K JL Operating and Storage Temperature Range -55 to +150 J TJ,TSTG NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted. DO-41 RATING AND CHARACTERISTIC CURVES 1N4001 THRU 1N4007 AVERAGE FORWARD RECTIFIED 1.6 1.4 MAXIMUM AVERAGE CURRENT RATING SINGLE HALF-WAVE, 60Hz RESISTIVE OR INDUCTIVE LEAD LENGTHS CURRENT AMPERES 1.2 1.0 .8 .6 .4 .2 0 0 20 40 60 80 120 140 160 180 AMBIENT TEMPERATURE, J Fig. 1-TYPICAL FORWARD CURRENT DERATING CURVE INSTANTANEOUS FORWARD CURRENT, FORWARD SURGE CURRENT, AMPERES 30 20 10 AMPERES 4 2 1.0 .4 .2 .1 .04 .02 .01 pk (HALF-SINE WAVE) 24 18 12 Tj=25J Pulse Width = 300gs 2% Duty Cycle 6 1 2 4 6 8 10 20 40 60 80 100 .6 .8 1.0 1.2 1.4 @ @ @ @ @ @ 1.5 INSTANTANEOUS FORWARD VOLTAGE, VOLTS NUMBER OF CYCLES AT 60Hz Fig. 2-TYPICAL FORWARD CHARACTERISTICS Fig. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1,000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 100 Tj = 150 J Tj = 150 J INSTANTANEOUS REVERSE CURRENT MICROAMPERES 10 4 Tj=100J 10 Tj = 100J 1.0 .4 .1 .04 .01 0 20 40 80 100 120 Tj=25J 1 0.1 Tj = 25J 0.01 0 20 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) PERCENTAGE OF PEAK REVERSE VOLTAGE, % Fig. 4-TYPICAL REVERSE CHARACTERISTICS Fig. 5-TYPICAL REVERSE CHARACTERISTICS |
Price & Availability of 1N4002
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |