 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NJG1524PC1 DPDT SWITCH GaAs MMIC sGENERAL DESCRIPTION NJG1524PC1 is a DPDT switch GaAs MMIC. The two same switches are merged into one package and functionally linked. It is useful for switching two circuits in-line. Each switches feature very low loss, high isolation and wide frequency coverage from 50MHz to 3GHz at low control voltage of 2.5V. The ultra small & thin FFP16-C1package is adopted. sFEATURES lSingle low voltage control lLow insertion loss lHigh isolation lHanding power lLow current consumption lUltra small & thin package sPIN CONFIGURATION FFP16 Type (Top View) 16 1 2 3 4 5 6 7 8 15 14 13 sPACKAGE OUTLINE NJG1524PC1 +2.5~+6.5V 0.3dB typ.@f=1GHz, PIN=0dBm, each switch 0.5dB typ.@f=2GHz, PIN=0dBm, each switch 42dB typ. @f=2GHz,PC1-PC2 27dB typ.@f=2GHz, PC1-PA1 PC1-PA2, PC2-PB1, PC2-PB2, PA1-PA2, PB1-PB2 20dBm max. @f=2GHz, VCTL=2.7V 16uA typ.@f=2GHz, PIN=10dBm FFP16-C1 (Package size: 2.5x2.5x0.85mm) Pin Connection 1.PA2 12 11 10 9 9.PB1 2.VCTL1 10.NC 3.VCTL2 11.VCTL1 4.PB2 5.GND 6.GND 7.PC2 8.GND 12.PA1 13.GND 14.PC1 15.GND 16.GND sTRUTH TABLE " H" =VCTL (H), " L" =VCTL (L) VCTL1 VCTL2 PC1 - PA1 PC2 - PB1 PC1 - PA2 PC2 - PB2 H L ON OFF L H OFF ON NOTE: Please note that any information on this catalog will be subject to change. -1- NJG1524PC1 sABSOLUTE MAXIMUM RATINGS (Ta=25C) PARAMETER Input Power Control voltage Power Dissipation Operating Temp. Storage Temp. SYMBOL PIN VCTL PD Topr Tstg CONDITIONS VCTL (L)=0V, VCTL (H)=2.7V VCTL (H) - VCTL (L) RATINGS 28 7.5 400 -40~+85 -55~+125 UNITS dBm V mW C C sELECTRACAL CHARACTERISTICS (EACH SWITCH) (VCTL (L)=0V, VCTL (H)=2.7V, ZS=ZO=50, Ta=25C) PARAMETER Operating voltage (L) Operating voltage (H) Control Current Insertion loss1 SYMBOL VCTL (L) VCTL (H) ICTL Loss1 f=2GHz, PIN=10dBm PC1-PA1, PC1-PA2, PC2-PB1, PC2-PB2 ON, f=1GHz, PIN=0dBm PC1-PA1, PC1-PA2, PC2-PB1, PC2-PB2 ON, f=2GHz, PIN=0dBm PC1-PA1, PC1-PA2, PC2-PB1, PC2-PB2 OFF, f=1GHz, PIN=0dBm PC1-PA1, PC1-PA2, PC2-PB1, PC2-PB2 OFF, f=2GHz, PIN=0dBm PA1, PA2, PB1, PB2 port 50 terminal, PC1-PC2 port, f=2GHz, PIN=0dBm f=2GHz f=0.05~2GHz, ON State f=0.05~2.5GHz CONDITIONS MIN -0.2 2.5 TYP 0 2.7 16 0.3 MAX 0.2 6.5 28 0.6 UNITS V V uA dB Insertion loss2 Loss2 - 0.5 0.8 dB Isolation1 ISL1 25.5 27 - dB Isolation2 ISL2 25 27 - dB Isolation3 Pin at 1dB compression point VSWR (PC, P1, P2) Switch time ISL3 P-1dB VSWR TSW 39 20 - 42 24 1.3 20 1.6 60 dB dBm ns -2- NJG1524PC1 sTERMINAL INFORMATION No. 1 SYMBOL PA2 DESCRIPTIONS RF port A2. This port is connected with PC1 port by controlling VCTL (L) to -0.2~+0.2V and VCTL (H) to 2.5~6.5V. In order to block the DC bias voltage of internal circuit, an external capacitor is required. Control port 1. The voltage of this port controls PC1 to PA1/PA2 and PC2 to PB1/PB2 state. The ` ON' and ` OFF' state is toggled by controlling voltage of this terminal to high-state (2.5~6.5V) or lowstate (-0.2~+0.2V). The voltage of VCTL2 should be set to opposite state. The bypass capacitor should be connected with GND as close as possible for excellent RF performance. Control port 2. The voltage of this port controls PC1 to PA1/PA2 and PC2 to PB1/PB2 state. The ` ON' and ` OFF' state is toggled by controlling voltage of this terminal to high-state (2.5~6.5V) or lowstate (-0.2~+0.2V). The voltage of VCTL1 should be set to opposite state. The bypass capacitor should be connected with GND as close as possible for excellent RF performance. RF port B2. This port is connected with PC2 port by controlling VCTL1 to -0.2~+0.2V and VCTL2 to 2.5~6.5V. In order to block the DC bias voltage of internal circuit, an external capacitor is required. Common RF port C2. In order to block the DC bias voltage of internal circuit, an external capacitor is required. RF port B1. This port is connected with PC1 port by controlling VCTL2 to -0.2~+0.2V and VCTL1 to 2.5~6.5V. In order to block the DC bias voltage of internal circuit, an external capacitor is required. No connected terminal. Control port 1. The voltage of this port controls PC1 to PA1/PA2 and PC2 to PB1/PB2 state. The ` ON' and ` OFF' state is toggled by controlling voltage of this terminal to high-state (2.5~6.5V) or lowstate (-0.2~+0.2V). The voltage of VCTL2 should be set to opposite state. The bypass capacitor should be connected with GND as close as possible for excellent RF performance. RF port A1. This port is connected with PC1 port by controlling VCTL2 to -0.2~+0.2V and VCTL1 to 2.5~6.5V. In order to block the DC bias voltage of internal circuit, an external capacitor is required. Common RF port C1. In order to block the DC bias voltage of internal circuit, an external capacitor is required. Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. 2 VCTL1 3 VCTL2 4 7 9 10 PB2 PC2 PB1 NC 11 VCTL1 12 14 5, 6, 8, 13, 15, 16 PA1 PC1 GND -3- NJG1524PC1 sTYPICAL CHARACTERISTICS (50MHz~3GHz, with application circuit, without DC blocking capacitor, losses of circuit are excluded.) PC1-PA1 Insertion Loss vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) 0.0 PC1-PA2 Insertion Loss vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) 0.0 Insertion Loss (dB) Insertion Loss (dB) 0.5 1.0 1.5 2.0 2.5 3.0 -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 0.0 -2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC2-PB1 Insertion Loss vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) 0.0 PC2-PB2 Insertion Loss vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) 0.0 Insertion Loss (dB) -0.5 Insertion Loss (dB) 0.5 1.0 1.5 2.0 2.5 3.0 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 0.0 -2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC1-PA1 Isolation vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) -20 -20 PC1-PA2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -25 -25 Isolation (dB) -30 Isolation (dB) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -30 -35 -35 -40 -40 -45 -45 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) -4- NJG1524PC1 sTYPICAL CHARACTERISTICS (50MHz~3GHz, with application circuit, without DC blocking capacitor, losses of circuit are excluded.) PC2-PB1 Isolation vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) -20 -20 PC2-PB2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -25 -25 Isolation (dB) Isolation (dB) -30 -30 -35 -35 -40 -40 -45 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -45 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PA1-PA2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -20 -20 PB1-PB2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -25 -25 Isolation (dB) -30 Isolation (dB) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -30 -35 -35 -40 -40 -45 -45 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC1-PC2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -20 PC1-PA1(on) VSWR vs. Frequency ( VCTL1=2.7V,VCTL2=0V,PC1 port ) 2.5 -30 Isolation (dB) 2.0 -50 1.5 -60 VSWR 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 -40 -70 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) -5- NJG1524PC1 sTYPICAL CHARACTERISTICS (50MHz~3GHz, with application circuit, without DC blocking capacitor, losses of circuit are excluded.) PC1-PA2(on) VSWR vs. Frequency ( VCTL1=0V,VCTL2=2.7V,PC1 port ) 2.5 PC2-PB1(on) VSWR vs. Frequency ( VCTL1=2.7V,VCTL2=0V,PC2 port ) 2.5 2.0 2.0 VSWR 1.5 VSWR 1.5 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC2-PB2(on) VSWR vs. Frequency ( VCTL1=0V,VCTL2=2.7V,PC2 port ) 2.5 2.0 VSWR 1.5 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) -6- NJG1524PC1 sTYPICAL CHARACTERISTICS (50MHz~100MHz, with application circuit, losses of PCB, connector and DC blocking capacitor (0.01uF) are included.) PC1-PA1 Insertion Loss vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) 0.0 PC1-PA2 Insertion Loss vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) 0.0 Insertion Loss (dB) -0.5 Insertion Loss (dB) 50 60 70 80 90 100 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 -2.0 50 60 70 80 90 100 Frequency (MHz) Frequency (MHz) PC2-PB1 Insertion Loss vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) 0.0 PC2-PB2 Insertion Loss vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) 0.0 Insertion Loss (dB) Insertion Loss (dB) 50 60 70 80 90 100 -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 -2.0 50 60 70 80 90 100 Frequency (MHz) Frequency (MHz) PC1-PA1 Isolation vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) -20 -20 PC1-PA2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) -30 Isolation (dB) 50 60 70 80 90 100 -30 -40 -40 -50 -50 50 60 70 80 90 100 Frequency (MHz) Frequency (MHz) -7- NJG1524PC1 sTYPICAL CHARACTERISTICS (50MHz~100MHz, with application circuit, losses of PCB, connector and DC blocking capacitor (0.01uF) are included.) PC2-PB1 Isolation vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) -20 -20 PC2-PB2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) Isolation (dB) -30 -30 -40 -40 -50 -50 50 60 70 80 90 100 50 60 70 80 90 100 Frequency (MHz) Frequency (MHz) PA1-PA2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -20 -20 PB1-PB2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) -30 Isolation (dB) 50 60 70 80 90 100 -30 -40 -40 -50 -50 50 60 70 80 90 100 Frequency (MHz) Frequency (MHz) PC1-PC2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -30 -40 Isolation (dB) -50 -60 -70 -80 50 60 70 80 90 100 Frequency (MHz) -8- NJG1524PC1 sTYPICAL CHARACTERISTICS (0.1GHz~0.5GHz, with application circuit, losses of PCB, connector and DC blocking capacitor (1000pF) are included.) PC1-PA1 Insertion Loss vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) 0.0 PC1-PA2 Insertion Loss vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) 0.0 Insertion Loss (dB) Insertion Loss (dB) 200 300 400 500 -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 100 -2.0 100 200 300 400 500 Frequency (MHz) Frequency (MHz) PC2-PB1 Insertion Loss vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) 0.0 PC2-PB2 Insertion Loss vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) 0.0 Insertion Loss (dB) Insertion Loss (dB) 200 300 400 500 -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 100 -2.0 100 200 300 400 500 Frequency (MHz) Frequency (MHz) PC1-PA1 Isolation vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) -20 -20 PC1-PA2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) -30 Isolation (dB) 200 300 400 500 -30 -40 -40 -50 100 -50 100 200 300 400 500 Frequency (MHz) Frequency (MHz) -9- NJG1524PC1 sTYPICAL CHARACTERISTICS (0.1GHz~0.5GHz, with application circuit, losses of PCB, connector and DC blocking (1000pF) are included.) PC2-PB1 Isolation vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) -20 -20 PC2-PB2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) -30 Isolation (dB) 200 300 400 500 -30 -40 -40 -50 100 -50 100 200 300 400 500 Frequency (MHz) Frequency (MHz) PA1-PA2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -20 -20 PB1-PB2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) -30 Isolation (dB) 200 300 400 500 -30 -40 -40 -50 100 -50 100 200 300 400 500 Frequency (MHz) Frequency (MHz) PC1-PC2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -30 -40 Isolation (dB) -50 -60 -70 -80 100 200 300 400 500 Frequency (MHz) - 10 - NJG1524PC1 sTYPICAL CHARACTERISTICS (0.5GHz~3GHz, with application circuit, losses of PCB, connector and blocking capacitor (56pF) are included.) PC1-PA1 Insertion Loss vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) 0.0 PC1-PA2 Insertion Loss vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) 0.0 Insertion Loss (dB) Insertion Loss (dB) -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 0.5 1.0 1.5 2.0 2.5 3.0 -2.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC2-PB1 Insertion Loss vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) 0.0 PC2-PB2 Insertion Loss vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) 0.0 Insertion Loss (dB) Insertion Loss (dB) -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 0.5 1.0 1.5 2.0 2.5 3.0 -2.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC1-PA1 Isolation vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) -20 -20 PC1-PA2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) Isolation (dB) 0.5 1.0 1.5 2.0 2.5 3.0 -30 -30 -40 -40 -50 -50 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) - 11 - NJG1524PC1 sTYPICAL CHARACTERISTICS (0.5GHz~3GHz, with application circuit, losses of PCB, connector and DC blocking capacitor (56pF) are included.) PC2-PB1 Isolation vs. Frequency ( VCTL1=0V,VCTL2=2.7V ,Pin=0dBm ) -20 -20 PC2-PB2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) Isolation (dB) -30 -30 -40 -40 -50 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PA1-PA2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -10 -10 PB1-PB2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) Isolation (dB) Isolation (dB) -20 -20 -30 -30 -40 -40 0.5 1.0 1.5 2.0 2.5 3.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC1-PC2 Isolation vs. Frequency ( VCTL1=2.7V,VCTL2=0V ,Pin=0dBm ) -20 PCB Through Loss vs. Frequency (Losses of PCB,connector and DC blocking capacitor) ( Pin=0dBm,PC1-PA1,PC2-PB1 ) 0.0 -30 -0.5 -40 Insertion Loss (dB) 0.5 1.0 1.5 2.0 2.5 3.0 Isolation (dB) -1.0 -50 -1.5 -60 -2.0 -70 -2.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) - 12 - NJG1524PC1 sTYPICAL CHARACTERISTICS (0.1GHz~3GHz, with application circuit, losses of PCB, connector and DC blocking capacitor (0.01uF)are included.) PCB Through Loss vs. Frequency (Losses of PCB,connector and DC blocking capacitor) ( Pin=0dBm,PC1-PA2,PC2-PB2 ) 0.0 -0.5 Insertion Loss (dB) -1.0 -1.5 -2.0 -2.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) sTYPICAL CHARACTERISTICS (Parts Table3, with application circuit, losses of external circuit are excluded.) Output Power ,Insertion Loss vs. Input Power ( PC1-PA1 ,f=1GHz ) 30 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.5V Output Power ,Insertion Loss vs. Input Power ( PC1-PA2 ,f=1GHz ) 30 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.5V -3.5 -3.5 25 -3.0 25 -3.0 Output Power (dBm) Output Power (dBm) Insertion Loss (dB) 20 -2.5 15 -2.0 15 -2.0 10 -1.5 10 -1.5 5 -1.0 5 -1.0 0 -0.5 0 -0.5 -5 10 15 20 25 30 0.0 -5 10 15 20 25 30 0.0 Input Power (dBm) Input Power (dBm) - 13 - Insertion Loss (dB) 20 -2.5 NJG1524PC1 sTYPICAL CHARACTERISTICS (Parts Table3, with application circuit, losses of external circuit are excluded.) Output Power ,Insertion Loss vs. Input Power ( PC1-PA1 ,f=2GHz ) 30 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.5V Output Power ,Insertion Loss vs. Input Power ( PC1-PA2 ,f=2GHz ) 30 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.5V -3.5 -3.5 25 -3.0 25 -3.0 Output Power (dBm) Output Power (dBm) Insertion Loss (dB) 20 -2.5 15 -2.0 15 -2.0 10 -1.5 10 -1.5 5 -1.0 5 -1.0 0 -0.5 0 -0.5 -5 10 15 20 25 30 0.0 -5 10 15 20 25 30 0.0 Input Power (dBm) Input Power (dBm) Switching Speed (VCTL=2.7V,Pin=10dBm) 13nsec - 14 - Insertion Loss (dB) 20 -2.5 NJG1524PC1 sTYPICAL CHARACTERISTICS (Parts Table3) Insertion Loss vs. Ambient Temperature (PC1-PA1,f=1GHz,Pin=0dBm) -0.2 -0.2 Insertion Loss vs. Ambient Temperature (PC1-PA2,f=1GHz,Pin=0dBm) -0.3 -0.3 Insertion Loss (dB) -0.4 Insertion Loss (dB) -0.4 -0.5 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -0.5 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -0.6 -0.6 -0.7 -0.7 -0.8 -50 0 50 o 100 -0.8 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) Insertion Loss vs. Ambient Temperature (PC1-PA1,f=2GHz,Pin=0dBm) -0.2 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V Insertion Loss vs. Ambient Temperature (PC1-PA2,f=2GHz,Pin=0dBm) -0.2 -0.3 -0.3 Insertion Loss (dB) -0.4 Insertion Loss (dB) -0.4 -0.5 -0.5 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -0.6 -0.6 -0.7 -0.7 -0.8 -50 0 50 o 100 -0.8 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) PC1-PA1 Isolation vs. Ambient Temperature (VCTL1=0V ,VCTL2=2.7V ,f=1GHz,Pin=0dBm) -20 PC1-PA1 Isolation vs. Ambient Temperature (VCTL1=0V ,VCTL2=2.7V ,f=2GHz,Pin=0dBm) -30 -25 -35 Isolation (dB) -30 Isolation (dB) -40 -35 -40 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -45 -50 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -45 -50 0 50 o 100 -55 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) - 15 - NJG1524PC1 sTYPICAL CHARACTERISTICS (Parts Table3) PC1-PA2 Isolation vs. Ambient Temperature (VCTL1=2.7V ,VCTL2=0V ,f=1GHz,Pin=0dBm) -20 -20 PC1-PA2 Isolation vs. Ambient Temperature (VCTL1=2.7V ,VCTL=0V ,f=2GHz,Pin=0dBm) -25 -25 Isolation (dB) -30 Isolation (dB) -30 -35 -40 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -35 -40 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -45 -50 0 50 o 100 -45 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) PA1-PA2 Isolation vs. Ambient Temperature (VCTL1=2.7V ,VCTL2=0V ,f=1GHz,Pin=0dBm) -20 PA1-PA2 Isolation vs. Ambient Temperature (VCTL1=2.7V ,VCTL2=0V ,f=2GHz,Pin=0dBm) -20 -25 -25 Isolation (dB) -30 Isolation (dB) -30 -35 -40 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -35 -40 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -45 -50 0 50 o 100 -45 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) PC1-PC2 Isolation vs. Ambient Temperature (VCTL1=2.7V ,VCTL2=0V ,f=2GHz,Pin=0dBm) -35 -40 Isolation (dB) -45 -50 -55 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V -60 -50 0 50 o 100 Ambient Temperature ( C) - 16 - NJG1524PC1 sTYPICAL CHARACTERISTICS (Parts Table3) PC1-PA1(on) VSWR vs. Ambient Temperarure (f=2.0GHz ,Pin=0dBm ,PC1 port) 1.5 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V PC1-PA1(on) VSWR vs. Ambient Temperarure (f=2.0GHz ,Pin=0dBm ,PA1 port) 1.5 1.4 1.4 VSWR 1.2 VSWR 1.3 1.3 1.2 1.1 1.1 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V 1.0 -50 0 50 o 100 1.0 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) PC1-PA2(on) VSWR vs. Ambient Temperarure (f=2.0GHz ,Pin=0dBm ,PC1 port) 1.5 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V PC1-PA2(on) VSWR vs. Ambient Temperarure (f=2.0GHz ,Pin=0dBm ,PA2 port) 1.5 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V 1.4 1.4 VSWR 1.2 VSWR 50 o 1.3 1.3 1.2 1.1 1.1 1.0 -50 0 100 1.0 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) PC2-PB1(on) VSWR vs. Ambient Temperarure (f=2.0GHz ,Pin=0dBm ,PC2 port) 1.5 PC2-PB1(on) VSWR vs. Ambient Temperarure (f=2.0GHz ,Pin=0dBm ,PB1 port) 1.5 1.4 1.4 VSWR VSWR 1.3 1.3 1.2 1.1 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V 1.2 1.1 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V 1.0 -50 0 50 o 100 1.0 -50 0 50 o 100 Temperature ( C) Ambient Temperature ( C) - 17 - NJG1524PC1 sTYPICAL CHARACTERISTICS (Parts Table3) PC2-PB2(on) VSWR vs. Ambient Temperarure (f=2.0GHz ,Pin=0dBm ,PB2 port) 1.5 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.0V PC2-PB2(on) VSWR vs. Ambient Temperarure (f=2.0GHz ,Pin=0dBm ,PC2 port) 1.5 1.4 1.4 VSWR VSWR 1.3 1.3 1.2 1.2 1.1 1.1 1.0 -50 0 50 o 100 1.0 -50 0 50 o 100 Temperature ( C) Ambient Temperature ( C) Control Current vs. Ambient Temperature ( PC1-PA1 ,f=1GHz ,Pin=10dBm ) 60 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.5V Control Current vs. Ambient Temperature ( PC1-PA2 ,f=1GHz ,Pin=10dBm ) 60 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V VCTL=4.0V VCTL=5.0V VCTL=6.5V Control Current (uA) 40 Control Current (uA) 0 50 o 50 50 40 30 30 20 20 10 -50 100 10 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) P-1dB vs. Ambient Temperature (PC1-PA1 ,f=2GHz) 28 28 P-1dB vs. Ambient Temperature (PC1-PA2 ,f=2GHz) 26 26 P-1dB (dBm) 24 P-1dB (dBm) VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V 24 22 22 VCTL=2.5V VCTL=2.7V VCTL=3.0V VCTL=3.5V 20 20 18 -50 0 50 o 100 18 -50 0 50 o 100 Ambient Temperature ( C) Ambient Temperature ( C) - 18 - NJG1524PC1 sAPPLICATION CIRCUIT sRECOMMENDED PCB DESIGN PA1 PB1 C6 PC1 C1 C5 C4 PC2 C2 C7 C8 C3 PCB SIZE=26x26mm PCB: FR-4, t=0.5mm CAPACITOR: size 1005 Strip line width=1.0mm Parts table Parts ID 1 fin=50100MHz 0.01uF 10pF PA2 VCTL1 VCTL2 PB2 C1~C6 C7,C8 2 fin=0.10.5GHz 1000pF 10pF 3 fin=0.52.5GHz 56pF 10pF PRCAUTION [1]The DC blocking capacitor have to be placed at RF terminal of PC1, PC2, PA1, PA2, PB1, PB2. Please choose appropriate capacitance values to the application frequency. [2]To reduce stripline influence on RF characteristics, please locate bypass capacitors (C7, C8) close to each terminal. [3]For good isolation the GND terminal must be placed possibly close to ground place of substrate, and through holes for GND should be placed near by the pin connection. - 19 - NJG1524PC1 sPACKAGE OUTLINE (FFP16-C1) 1pin INDEX 0.35 2pin INDEX 0.2540.1 0.850.15 0.10 0.30 0.30 2.50.1 UNIT PCB OVER COAT WEIGHT : mm : Ceramic : Epoxy resin : 15mg 0.17 0.50 0.20 0.50 TERMINAL TREAT : Au 0.365 0.27 Cautions on using this product This product contains Gallium-Arsenide (GaAs) which is a harmful material. * Do NOT eat or put into mouth. * Do NOT dispose in fire or break up this product. * Do NOT chemically make gas or powder with this product. * To waste this product, please obey the relating law of your country. This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle with care to avoid these damages. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. - 20 - |
Price & Availability of NJG1524PC1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |