|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number:ENN2101C PNP/NPN Epitaxial Planar Silicon Transistors 2SA1507/2SC3902 160V/1.5A Switching Applications Applications * Color TV audio output, converters, inverters. Package Dimensions unit:mm 2042B [2SA1507/2SC3902] 8.0 1.0 1.4 Features * High breakdown voltage. * Large current capacity. * Adoption of FBET and MBIT process. * The plastic-covered heat sink eliminates the need for an insulator when mounting the 2SA1507/2SC3902. 4.0 1.0 3.3 3.0 1.5 7.5 1.6 0.8 3.0 0.8 0.75 15.5 11.0 0.7 1 2 3 ( ) : 2SA1507 4.8 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Peak Collector Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Conditions 1.7 2.4 1 : Emitter 2 : Collector 3 : Base SANYO : TO-126ML Ratings (-)180 (-)160 (-)6 (-)1.5 (-)2.5 1.5 Unit V V V A A W W Tc=25C 10 150 -55 to +150 C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Symbol ICBO IEBO hFE1 hFE2 fT VCB=(-)120V, IE=0 VEB=(-)4V, IC=0 VCE=(-)5V, IC=(-)10mA VCE=(-)5V, IC=(-)10mA VCE=(-)10V, IC=(-)50mA 100* 90 120 MHz Conditions Ratings min typ max (-)0.1 (-)0.1 400* Unit A A * ; The 2SA1507/2SC3902 are classified by 100mA hFE as follows : Rank hFE R 100 to 200 S 140 to 280 T 200 to 400 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 53002RM (KT)/71598HA (KT)/O2196TS (KOTO) 8-9520/3307KI/9116AT, TS No.2101-1/5 2SA1507/2SC3902 Continued from preceding page. Parameter Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Votage Turn-ON Time Storage Time Fall Time Symbol Cob VCE(sat) VBE(sat) Conditions VCB=(-)10V, f=1MHz IC=(-)500mA, IB=(-)50mA IC=(-)500mA, IB=(-)50mA (-)180 (-)160 (-)6 0.04 (0.7) 1.2 (0.04) 0.08 Ratings min typ (22) 14 (-0.2) 0.13 (-)0.85 (-0.5) 0.45 (-)1.2 max Unit pF pF V V V V V V s s s s s V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO ton tstg tf IE=(-)10A, IC=0 See specified Test Circuit See specified Test Circuit See specified Test Circuit Switching Time Test Circuit PW=20s D.C.1% INPUT VR 50 + 100F --5V + 470F 100V IB1 IB2 RB RL 14.3 IC=10IB1=--10IB2=0.7A (For PNP, the polarity is reversed.) --1.8 --1.6 IC -- VCE 2SA1507 1.8 1.6 IC -- VCE 2SC3902 50mA 40mA 30mA 20mA 10mA 5mA Collector Current, IC - A --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 Collector Current, IC - A 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 A --80m 60mA -A --40m A --20m mA --10 --5mA --2mA --1mA 2mA 1mA IB=0 --1 --2 --3 --4 --5 ITR03822 IB=0 0 1 2 3 4 5 ITR03823 Collector-to-Emitter Voltage, VCE - V --1.0 Collector-to-Emitter Voltage, VCE - V 1.0 IC -- VCE 2SA1507 A --5.0m A --4.5m --4.0mA --3.5mA --3.0mA --2.5mA --2.0mA --1.5mA IC -- VCE 4.5mA 4.0mA 3.5mA 5.0 m 2SC3902 Collector Current, IC - A Collector Current, IC - A --0.8 0.8 A 3.0mA 0.6 --0.6 2.5mA 2.0mA 0.4 --0.4 1.5mA --1.0mA --0.2 1.0mA 0.2 --0.5mA 0 0 0.5mA 0 IB=0 --10 --20 --30 --40 Collector-to-Emitter Voltage, VCE - V IB=0 0 10 20 30 40 50 ITR03825 --50 ITR03824 Collector-to-Emitter Voltage, VCE - V No.2101-2/5 2SA1507/2SC3902 --1.6 IC -- VBE 1.6 1.4 IC -- VBE 2SC3902 VCE=5V 2SA1507 --1.4 VCE=--5V Collector Current, IC - A --1.2 --1.0 --0.8 Collector Current, IC - A 1.2 1.0 0.8 0.6 0.4 0.2 0 --0.4 --0.2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 Base-to-Emitter Voltage, VBE - V ITR03826 0 0.2 0.4 0.6 Ta= 75 C 25C --25C 0.8 Ta= 7 --0.6 5C 25C --25C 1.0 1.2 ITR03827 Base-to-Emitter Voltage, VBE - V 5 5 3 2 hFE -- IC Ta=75C 25C 2SA1507 VCE=--5V DC Current Gain, hFE hFE -- IC Ta=75C 3 2 2SC3902 VCE=5V 25C DC Current Gain, hFE --25C 100 7 5 3 2 --25C 100 7 5 3 2 10 7 5 7 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC - A 7 10 7 --1.0 2 3 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 ITR03828 2 Collector Current, IC - A ITR03829 5 fT -- IC 2SA1507 / 2SC3902 VCE=10V 2SC39 02 Output Capacitance, Cob - pF Cob -- VCB 2SA1507 / 2SC3902 f=1MHz Gain-Bandwidth Product, fT - MHz 3 2 100 7 5 3 2 2SA1507 100 7 5 3 2 2SA 2SC 150 2 7 390 10 7 5 For PNP, minus sign is omitted. 10 7 0.01 2 3 5 7 0.1 2 3 5 For PNP, minus sign is omitted. 3 7 1.0 2 3 5 7 10 2 3 5 Collector Current, IC - A --10000 7 1.0 2 ITR03830 Collector-to-Base Voltage, VCB -- V 10000 7 100 ITR03831 VCE(sat) -- IC 2SA1507 IC / IB=10 VCE(sat) -- IC 2SC3902 IC / IB=10 Collector-to-Emitter Saturation Voltage, VCE (sat) - mV 3 2 Collector-to-Emitter Saturation Voltage, VCE (sat) - mV 5 5 3 2 1000 5 3 2 100 5 3 --1000 5 3 2 --100 5 3 2 7 25C Ta=75C --25C 25C Ta=75C --25C 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC - A 7 --1.0 2 3 2 ITR03832 Collector Current, IC - A ITR03833 No.2101-3/5 2SA1507/2SC3902 --10 7 VBE(sat) -- IC 2SA1507 IC / IB=10 --10 7 VBE(sat) -- IC 2SC3902 IC / IB=10 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 3 2 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 3 2 --1.0 7 5 3 2 25C Ta=--25C 25C --1.0 7 5 3 2 Ta=--25C 75C 75C 7 --0.01 2 3 5 7 --0.1 23 5 7 --1.0 23 Collector Current, IC - A ITR03834 7 --0.01 2 3 5 7 --0.1 23 5 Collector Current, IC - A 7 --1.0 2 3 ITR03835 10 5 ASO 2SA1507 / 2SC3902 ICP=2.5A IC=1.5A DC DC op op era 1.6 1.5 1.4 PC -- Ta 2SA1507 / 2SC3902 Collector Dissipation, PC - W Collector Current, IC - A 3 2 1.0 5 3 2 0.1 5 3 2 1m s 10 10 tio 1.2 1.0 0.8 0.6 0.4 0.2 0 0m s c= 25 ms N n(T o he era tio n(T C ) at sin k c= 25 C ) 0.01 5 For PNP, minus sign is omitted. Ta=25C Single pulse 7 1.0 2 3 5 7 10 2 3 5 7 100 2 3 0 20 40 60 80 100 120 140 160 Collector-to-Emitter Voltage, VCE - V 12 ITR03836 Ambient Temperature, Ta - C ITR03837 PC -- Tc 2SA1507 / 2SC3902 Collector Dissipation, PC - W 10 8 6 4 2 0 0 20 40 60 80 100 120 140 160 Case Temperature, Tc - C ITR03838 No.2101-4/5 2SA1507/2SC3902 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 2002. Specifications and information herein are subject to change without notice. PS No.2101-5/5 |
Price & Availability of 2SA1507 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |