|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Optoisolators (Photocouplers) CNC1S171 (ON3171) Optoisolator For isolated signal transmission Features High current transfer ratio : CTR >50% High I/O isolation voltage : VISO = 5000 Vrms (min.) Fast response : tr = 2 s, tf = 3 s(typ.) Low dark current : ICEO < 100nA VDE approved (VDE0884) UL listed (No. E79920) BSI certified (BS415 No. 7889, BS7002 No. 7890) SEMKO certified (No. 9625004) DEMKO certified (No. 305848) NEMKO certified (No. 199633176) FIMKO certified (No. 191784) CSA approved (No. CA109151) Symbol Ratings VR IF IFP *1 4.580.3 Unit : mm 5.0 max. 0.3 min. 1 2 4 3 4-0.50.1 4-1.20.15 2.540.25 2.54 min. 7.620.3 6.20.5 3.850.3 2.0 0.25 -0 10~12 +0.15 Absolute Maximum Ratings (Ta = 25C) Parameter Reverse voltage (DC) Forward current (DC) Input (Light emitting diode) Pulse forward current Power dissipation Collector current Output (Photo Collector to emitter voltage transistor) Emitter to collector voltage Collector power dissipation Isolation voltage, input to output Total power dissipation Operating ambient temperature Storage temperature Parameter Input Forward voltage (DC) characteristics Capacitance between pins Collector cutoff current Output Collector to emitter voltage characteristics Collector to emitter capacitance DC current transfer ratio Isolation voltage, input to output Transfer Isolation resistance, input to output characteristics Rise time Fall time *1 DC *2 *3 Unit V mA A mW mA V V mW Vrms mW C C Conditions 1 4 6 50 1 75 50 80 7 150 5000 200 2 Pin connection 3 PD*2 IC VCEO VECO PC*3 VISO PT 1: Anode 2: Cathode 3: Emitter 4: Collector Topr -30 to +100 Tstg -55 to +125 Symbol IR VF Ct VR = 3V IF = 50mA Pulse width 100 s, repeat 100 pps Input power derating ratio is 0.75 mW/C at Ta 25C. *3 Output power derating ratio is 1.5 mW/C at Ta 25C. *1 *2 Electrical Characteristics (Ta = 25C) min typ 1.35 15 5 80 10 50 5000 0.7 1011 2 3 0.1 0.2 600 100 max 10 1.5 Unit A V pF nA V pF % Vrms pF s s V Reverse current (DC) VR = 0V, f = 1MHz ICEO VCE = 20V VCEO IC = 100A CC VISO CISO RISO tr*2 tf*3 VCE = 10V, f = 1MHz t = 1 min., RH < 60% f = 1MHz VISO = 500V VCC = 10V, IC = 5mA, RL = 100 CTR*1*4 VCE = 10V, IF = 5mA Isolation capacitance, input to output Collector to emitter saturation voltage VCE(sat) IF = 20mA, IC = 1mA current transfer ratio (CTR) is a ratio of output current against DC input current. tr : Time required for the collector current to increase from 10% to 90% of its final value tf : Time required for the collector current to decrease from 90% to 10% of its initial value Note) The part number in the parenthesis shows conventional part number. 1 CNC1S171 Optoisolators (Photocouplers) *4 CTR classifications Q 50 to 120 R 100 to 250 S 200 to 600 Class CTR (%) PC , PD -- Ta Collector power dissipation , power dissipation PC , PD (mW) 160 PC 60 IF -- V F 10 2 Ta = 25C 50 VCC = 10V Ta = 25C IC -- I F IC (mA) Collector current 120 IF (mA) 10 40 Forward current 80 PD 30 1 20 40 10 -1 10 0 - 20 0 0 20 40 60 80 100 120 0 0.9 1.0 1.1 1.2 1.3 1.4 10 -2 10 -1 1 10 10 2 Ambient temperature Ta (C ) Forward voltage VF (V) Forward current IF (mA) IC -- VCE 40 50mA 40mA 10 2 IC -- VCE(sat) Ta = 25C 160 IC -- Ta VCC = 5V IC (mA) 30 IC (mA) IF = 50mA 10 20mA 10mA 5mA IC (%) Relative output current 30mA 25mA 120 IF = 10mA 5mA 10mA 1mA 5mA 1mA 80 Collector current 20 20mA 15mA 12mA 10mA Collector current 1 2mA 10 0 0 8 16 9mA 8mA 7mA 6mA 5mA 4mA 3mA 2mA 1mA 24 32 40 40 10 -1 0 0.1 0.2 0.3 0.4 0.5 0.6 0 - 50 0 50 100 Collector to emitter voltage VCE (V) Collector to emitter saturation voltage VCE(sat) (V) Ambient temperature Ta (C ) 2 Optoisolators (Photocouplers) CNC1S171 ICEO -- Ta 10 VCE = 30V 1 20V 10V 10 10 2 tr -- IC VCC = 10V Ta = 25C 10 2 tf -- IC VCC = 10V Ta = 25C ICEO (A) 10 500 100 RL = 1k 500 tr (s) 10 -1 tf (s) RL = 1k 100 1 Rise time Dark current 10 -2 10 -1 10 -3 Sig.IN Sig. OUT 50 VCC Sig. OUT RL 90% 10% Fall time 1 10 -1 Sig.IN Sig. OUT 50 VCC Sig. OUT RL 90% 10% ;; ;; 10 -4 - 40 - 20 0 20 40 60 80 100 10 -2 10 -1 tr tf 10 2 ;; 10 -2 10 -1 1 td tr 10 td tf 10 2 1 10 Ambient temperature Ta (C ) Collector current IC (mA) Collector current IC (mA) Frequency characteristics 10 Ta = 25C Measurement circuit of frequency characteristics +10V +10V 50k 100F 16V P (dB) Relative power output 1 ;; ; Sig.IN - 50 IF = 5mA 2mA 10 -1 Sig.OUT + 10 -2 5k 50 Sig.OUT 50 10 -3 1 10 10 2 10 3 Frequency f (kHz) ;; ; ;; 3 Caution for Safety Gallium arsenide material (GaAs) is used in this product. DANGER Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of ON3171 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |