 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DM74ALS1035 Hex Non-Inverting Driver with Open Collector Outputs September 1986 Revised February 2000 DM74ALS1035 Hex Non-Inverting Driver with Open Collector Outputs General Description These devices contain six independent drivers, each of which performs the logic identity function. The outputs require an external pull-up resistor for proper logical operation. Features s Switching specifications at 50 pF s Switching specifications guaranteed over full temperature and VCC range s Advanced oxide-isolated, ion-implanted Schottky TTL process s Functionally and pin for pin compatible with Schottky and low power Schottky TTL counterpart s Improved AC performance over Schottky and low power Schottky counterparts Ordering Code: Order Number DM74ALS1035M DM74ALS1035N Package Number M14A N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Connection Diagram Function Table Y=A Input A L H L = LOW Logic Level H = HIGH Logic Level Output Y L H (c) 2000 Fairchild Semiconductor Corporation DS006260 www.fairchildsemi.com DM74ALS1035 Absolute Maximum Ratings(Note 1) Supply Voltage Input Voltage OFF-State Output Voltage Operating Free Air Temperature Range Storage Temperature Range Typical JA N Package M Package 76.0C/W 106.5C/W 7V 7V 7V 0C to +70C -65C to +150C Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Recommended Operating Conditions Symbol VCC VIH VIL VOH IOL TA Supply Voltage HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Current Free Air Operating Temperature 0 Parameter Min 4.5 2 0.8 5.5 24 70 Nom 5 Max 5.5 Units V V V V mA C Electrical Characteristics over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25C. Symbol VIK IOH VOL II IIH IIL ICC Parameter Input Clamp Voltage HIGH Level Output Current LOW Level Output Voltage Input Current @ Maximum Input Voltage VCC = 5.5V, VIH = 7V HIGH Level Input Current LOW Level Input Current Supply Current VCC = 5.5V, VIH = 2.7V VCC = 5.5V, VIL = 0.4V VCC = 5.5V Outputs HIGH Outputs LOW 3 8 Conditions VCC = 4.5V, II = -18 mA VCC = 4.5V, VOH = 5.5V VCC = 4.5V IOL = 12 mA IOL = 24 mA 0.25 0.35 Min Typ Max -1.5 100 0.4 0.5 0.1 20 -0.1 6 14 Units V A V V mA A mA mA mA Switching Characteristics over recommended operating free air temperature range Symbol tPLH tPHL Parameter Propagation Delay Time LOW-to-HIGH Level Output Propagation Delay Time HIGH-to-LOW Level Output RL = 680 CL = 50 pF Conditions VCC = 4.5V to 5.5V Min 5 2 Max 30 12 Units ns ns www.fairchildsemi.com 2 DM74ALS1035 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M14A 3 www.fairchildsemi.com DM74ALS1035 Hex Non-Inverting Driver with Open Collector Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 4 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com |
Price & Availability of DM74ALS1035
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |