 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ303A GENERAL DESCRIPTION High-voltage, high-speed planar-passivated npn power switching transistor in a TO220AB envelope intended for use in high frequency electronic lighting ballast applications, converters, inverters, switching regulators, motor control systems, etc. QUICK REFERENCE DATA SYMBOL VCESM VCBO VCEO IC ICM Ptot VCEsat hFEsat tf PARAMETER Collector-emitter voltage peak value Collector-Base voltage (open emitter) Collector-emitter voltage (open base) Collector current (DC) Collector current peak value Total power dissipation Collector-emitter saturation voltage DC current gain Fall time CONDITIONS VBE = 0 V TYP. 0.25 12 145 MAX. 1000 1000 500 5 10 100 1.5 160 UNIT V V V A A W V ns Tmb 25 C IC = 3 A; IB = 0.6 A IC = 3 A; VCE = 5 V IC=2.5 A,IB1=0.5 A PINNING - TO220AB PIN 1 2 3 tab base collector emitter collector DESCRIPTION PIN CONFIGURATION tab SYMBOL c b 1 23 e LIMITING VALUES Limiting values in accordance with the Absolute Maximum Rating System (IEC 134) SYMBOL VCESM VCEO VCBO IC ICM IB IBM Ptot Tstg Tj PARAMETER Collector to emitter voltage Collector to emitter voltage (open base) Collector to base voltage (open emitter) Collector current (DC) Collector current peak value Base current (DC) Base current peak value Total power dissipation Storage temperature Junction temperature CONDITIONS VBE = 0 V MIN. -65 MAX. 1000 500 1000 5 10 2 4 100 150 150 UNIT V V V A A A A W C C Tmb 25 C THERMAL RESISTANCES SYMBOL Rth j-mb Rth j-a PARAMETER Junction to mounting base Junction to ambient in free air CONDITIONS TYP. 60 MAX. 1.25 UNIT K/W K/W September 1998 1 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ303A STATIC CHARACTERISTICS Tmb = 25 C unless otherwise specified SYMBOL ICES,ICBO ICES ICEO IEBO VCEOsust VCEsat VBEsat hFE hFE hFEsat PARAMETER Collector cut-off current 1 Collector cut-off current 1 Emitter cut-off current Collector-emitter sustaining voltage Collector-emitter saturation voltage Base-emitter saturation voltage DC current gain DC current gain CONDITIONS VBE = 0 V; VCE = VCESMmax VBE = 0 V; VCE = VCESMmax; Tj = 125 C VCEO = VCEOMmax(500V) VEB = 9 V; IC = 0 A IB = 0 A; IC = 100 mA; L = 25 mH IC = 3 A; IB = 0.6 A IC = 3 A; IB = 0.6 A IC = 5 mA; VCE = 5 V IC = 500 mA; VCE = 5 V IC = 2.5 A; VCE = 5 V IC = 3 A; VCE = 5 V MIN. 500 10 14 10 TYP. 0.25 0.97 22 25 13.5 12 MAX. 1.0 2.0 0.1 0.1 1.5 1.3 35 35 17 UNIT mA mA mA mA V V V DYNAMIC CHARACTERISTICS Tmb = 25 C unless otherwise specified SYMBOL PARAMETER Switching times (resistive load) ton ts tf Turn-on time Turn-off storage time Turn-off fall time Switching times (inductive load) ts tf Turn-off storage time Turn-off fall time Switching times (inductive load) ts tf Turn-off storage time Turn-off fall time CONDITIONS ICon = 2.5 A; IBon = -IBoff = 0.5 A; RL = 75 ohms; VBB2 = 4 V; TYP. MAX. UNIT s s s s ns s ns 0.5 3.3 0.33 0.7 4 0.45 ICon = 2.5 A; IBon = 0.5 A; LB = 1 H; -VBB = 5 V ICon = 2.5 A; IBon = 0.5 A; LB = 1 H; -VBB = 5 V; Tj = 100 C 1.4 145 1.6 160 1.7 160 1.9 200 1 Measured with half sine-wave voltage (curve tracer). September 1998 2 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ303A + 50v 100-200R IC 90 % ICon 90 % 10 % Horizontal Oscilloscope Vertical 300R 30-60 Hz 6V 1R IB ts ton toff IBon 10 % tr 30ns -IBoff tf Fig.1. Test circuit for VCEOsust. Fig.4. Switching times waveforms with resistive load. IC / mA VCC 250 200 LC IBon 100 LB T.U.T. -VBB 0 VCE / V min VCEOsust Fig.2. Oscilloscope display for VCEOsust. Fig.5. Test circuit inductive load. VCC = 300 V; -VBE = 5 V; LC = 200 uH; LB = 1 uH VCC ICon 90 % IC RL VIM 0 tp IB RB T.U.T. ts toff IBon 10 % tf t T -IBoff t Fig.3. Test circuit resistive load. VIM = -6 to +8 V VCC = 250 V; tp = 20 s; = tp / T = 0.01. RB and RL calculated from ICon and IBon requirements. Fig.6. Switching times waveforms with inductive load. September 1998 3 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ303A 120 110 100 90 80 70 60 50 40 30 20 10 0 PD% Normalised Power Derating 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 VBEsat/V 0 20 40 60 80 100 Tmb / C 120 140 0.1 1.0 IC/A 10.0 Fig.7. Normalised power dissipation. PD% = 100PD/PD 25C = f (Tmb) h FE 100 5V Fig.10. Base-Emitter saturation voltage. Solid lines = typ values, VBEsat = f(IC); at IC/IB =4. VCEsat/V 0.5 0.4 10 0.3 0.2 Tj = 25 C 1V 0.1 1 0.01 0.0 0.1 IC / A 1 10 0.1 1.0 IC/A 10.0 Fig.8. Typical DC current gain. hFE = f(IC) parameter VCE Fig.11. Collector-Emitter saturation voltage. Solid lines = typ values, VCEsat = f(IC); at IC/IB =4. Zth / (K/W) 2.0 VCEsat/V 10 1.6 IC=1A 1.2 2A 3A 4A 1 D= 0.5 0.2 0.1 0.05 0.02 0 0.8 0.1 0.4 P D tp D= tp T t T 0.0 0.01 0.10 1.00 10.00 0.01 1E-06 1E-04 IB/A 1E-02 t/s 1E+00 Fig.9. Collector-Emitter saturation voltage. Solid lines = typ values, VCEsat = f(IB); Tj=25C. Fig.12. Transient thermal impedance. Zth j-mb = f(t); parameter D = tp/T September 1998 4 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ303A VCC IC/A 100 LC ICM max 10 Duty cycle = 0.01 IBon VCL LB T.U.T. IC max tp= 10us II (1) -VBB 100us 1 Fig.13. Test Circuit for reverse bias safe operating area. Vcl 1000V; Vcc = 150V; VBB = -5V; LB = 1H; Lc = 200H I 0.1 1ms (2) 10ms DC III IC/V 11 10 0.01 1 10 100 1,000 9 VCE/V 8 7 Fig.15. Forward bias safe operating area. Ths 25 C (1) (2) I II III NB: Ptot max and Ptot peak max lines. Second breakdown limits. Region of permissible DC operation. Extension for repetitive pulse operation. Extension during turn-on in single transistor converters provided that RBE 100 and tp 0.6 s. Mounted with heatsink compound and 30 5 newton force on the centre of the envelope. 6 5 4 3 2 1 0 0 200 400 600 800 1,000 1,200 VCE CLAMP/V Fig.14. Reverse bias safe operating area Tj Tjmax September 1998 5 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ303A MECHANICAL DATA Dimensions in mm Net Mass: 2 g 4,5 max 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 2 3 (2x) 2,54 2,54 0,9 max (3x) 0,6 2,4 Fig.16. TO220AB; pin 2 connected to mounting base. Notes 1. Refer to mounting instructions for TO220 envelopes. 2. Epoxy meets UL94 V0 at 1/8". September 1998 6 Rev 1.000 Philips Semiconductors Product specification Silicon Diffused Power Transistor BUJ303A DEFINITIONS Data sheet status Objective specification Product specification Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. (c) Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. This data sheet contains target or goal specifications for product development. This data sheet contains final product specifications. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1998 7 Rev 1.000 |
Price & Availability of BUJ303A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |