View MN39160FH_341275.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CCD Area Image Sensor
MN39160FH
4.5 mm (type-1/4) 680k-pixel CCD Area Image Sensor
I Overview
The MN39160FH is a 4.5 mm (type-1/4) interline transfer CCD (IT-CCD) solid state image sensor device. This device uses photodiodes in the optoelectric conversion section and CCDs for signal readout. The electronic shutter function has made an exposure time of 1/10 000 seconds possible. Further, this device has the features of high sensitivity, low noise, broad dynamic range, and low smear. This device has a total of 681 739 pixels (1 007 horizontal x 677 vertical) and provides stable and clear images with a resolution of 600 horizontal TV-lines and 420 vertical TV-lines. Part Number Size System NTSC Color or B/W Color
(Top View)
I Pin Assignments
V4 V3 V2 V1 GND TEST VDD
1 2 3 4 5 6 7
14 13 12 11 10 9 8
PT Sub H2 H1 R GND VO
MN39160FH 4.5 mm (type-1/4)
I Features
* Effective pixel number 962 (horizontal) x 654 (vertical) * High sensitivity * Broad dynamic range * Low smear * Electronic shutter
I Applications
* Camcorders * FA, OA cameras
Publication date: September 2001
SMD00002BEC
1
MN39160FH
I Block Diagram
(4 columns OB + 962 columns valid area + 41 columns OB)
(2 dummies + OB11 + valid area 654 + OB12 )
Sub
13
V4 2 V3 3 4
Vertical shift register
1
V2
V1
Photo diode
VO VDD GND
8 7 9
Output section
Horizontal register (one dummy at the front, no dummy at the back)
GND 6 TEST *1 14 PT
5
10
11 H1
R
*1 : TEST pin must be left open, because the pin outputs CCD internal bias voltage.
I Pin Descriptions
Pin No. Symbol 1 2 3 4 5 6 7 V4 V3 V2 V1 GND TEST VDD Description Vertical shift register clock pulse 4 Vertical shift register clock pulse 3 Vertical shift register clock pulse 2 Vertical shift register clock pulse 1 GND TEST pin (OPEN) Power supply
*1
Pin No. Symbol 8 9 10 11 12 13 14 VO GND R H1 H2 Sub PT
H2
12
Description Video output GND Reset pulse (RG) Horizontal register clock pulse 1 Horizontal register clock pulse 2 Substrate P-well for protection circuit
Note) *1: TEST pin must be left open, because the pin outputs CCD internal bias volltage.
I Device Parameter (H x V)
Parameter Pixel number
*1
Value 962 x 654 3.655 6 x 2.714 1 3.80 x 4.15
Unit pixel mm2 m2
Image sensing block dimension Pixel dimension
Note) *1: OB columns are not included.
2
SMD00002BEC
MN39160FH
I Absolute Maximum Ratings and Operating Conditions
Absolute maximum rating Parameter VDD VPT
*3, 4
Operating condition Min 14.5 -7.5 3.0 Typ 15.0 -7.0 0 3.3 Max 15.5 -6.5 3.6 Unit V V V V V 3.3 0 3.3 0 3.6 0.2 3.6 0.2 V V V V V 22.0 15.0 0 -7.0 0 -7.0 15.0 0 -7.0 0 -7.0 25 23.0 15.5 0.05 -6.5 0.05 -6.5 15.5 0.05 -6.5 0.05 -6.5 V V V V V V V V V V V C C
Lower limit - 0.2 -10.0 - 0.2 - 0.2 - 0.2
Upper limit 18 0.2
GND VR VH1 VH2 VSub
*2 *1
(Reference voltage) High-Low Bias High Low High Low 8 8 35 18 15 18 15 60 80 8
(Supplied internally) 3.0 - 0.2 3.0 - 0.2 (Supplied internally) 21.0 14.5 - 0.05 -7.5 - 0.05 -7.5 14.5 - 0.05 -7.5 - 0.05 -7.5 -9 -9 -9 -9 -10 -30
VSub VV1
*3, 4
High Middle Low
VV2 VV3
*3, 4
Middle Low
*3, 4
High Middle Low
VV4
*3, 4
Middle Low
Operating temperature Storage temperature
SMD00002BEC
3
MN39160FH
I Absolute Maximum Ratings and Operating Conditions (continued)
Note) 1. Standard photo detecting condition Standard photo detecting condition stands for detecting image with a light source of color temperature of 2 856K, luminance of 1 050 cd/m2, and using a color temperature conversion filter LB-40 (HOYA), infrared cut filter CAW-500S with thickness 2.5 mm for a light path and with F8 lens aperture. The quantity of the incidental light to a photo-detecting surface under the above condition is defined as the standard quantity of light. 2. *1: VSub when using electronic shutter function
VSub H VSub (V) VSub L GND VSub (V) (Supplied internally)
* Sub pulse generates once every 1 V period.
*2: VSub supplied internally is the voltage suppressing the blooming generation at x500 light quantity relative to the standard light quantity. *3: Relation between VPT and VVL Set VPT under the following condition against VL of a vertical transfer clock waveform. VPT VL (VV1L to VV4L) - 0.2 < VV - VPT < 24.5 (V) *4: Absolute maximum ratings
I Optical Characteristics
Parameter Carrier saturation output Sensitivity Vertical smear Symbol Sc So Sm J chart J chart F1.4, 1/32 ND 1/10 V chart, F1.4 Conditions Min 500 80 Typ 110 Max 0.01 Unit mV mV %
Note) The above-mentioned characteristics are the values on driving the device for the imaging stabilizer mode (1/60 seconds accumulation).
4
SMD00002BEC
MN39160FH
I Timing Diagram
* High speed pulse timing
H1
50%
50%
50%
27.8 ns 3 ns
CCD output
R
50%
50%
1 ns 3 ns
10 ns 13.9 ns
Clamp pulse (DS1)
50%
50%
3 ns 3 ns
13.9 ns 3 ns
Sampling pulse (DS2)
50%
50%
4 ns 3 ns
13.9 ns 3 ns
SMD00002BEC
5
MN39160FH
I Timing Diagram (continued)
* Rise time and fall time of each pulse
V1 , V3
0.9
0.9
0.1 0.9
0.1 0.9
0.1 300 ns V2 , V4 300 ns 300 ns
0.1 300 ns
0.9
0.9
0.1 300 ns H1 , H2 0.9 0.9 R
0.1 300 ns
0.9
0.9
0.1 8 ns
0.1 8 ns
0.1 6 ns
0.1 6 ns
6
SMD00002BEC
MN39160FH
I Color Filter Arrays on CCD
654 653 Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G Cy Mg Ye G
8 7 6 5 4 3 2 1
Cy G Cy Mg Cy G Cy Mg 1
Ye Mg Ye G Ye Mg Ye G 2
Cy G Cy Mg Cy G Cy Mg 3
Ye Mg Ye G Ye Mg Ye G 4
Cy G Cy Mg Cy G Cy Mg 5
Ye Mg Ye G Ye Mg Ye G 6
Cy G Cy Mg Cy G Cy Mg 7
Ye Mg Ye G Ye Mg Ye G 8
Cy G Cy Mg Cy G Cy Mg
Ye Mg Ye G Ye Mg Ye G
961 962
I Graph of Characteristics
CCD color filter spectral characteristics
1.2
Ye 1.0
0.8
Relative sensitivity
0.6 Cy Gr
0.4 Mg
0.2
0 400
450
500
550
600
650
700
750
800
Wavelength (nm) SMD00002BEC
7
MN39160FH
I Package Dimensions (unit: mm)
* WDIP014-P-0400H
10.000.08 9.000.10 5.000.08 14 8
Reference plane
5.000.08 9.000.10 10.000.08
0.015
Valid pixel center
(0.60)
(1.19)
1.27
0.300.05
3.500.20
1.300.10
0.3 M
1
7
2-R0.40 (depth 0.30)
14
8
1. The center of the package is equal to the center of the effective pixel area. 2. The rotation angle of the effective pixel area: up to 1.0 degree 3. The distance from the bottom face of the package to the surface of the effective pixel area: 1.41 mm 0.1 mm 4. The tilt of the effective pixel area for the bottom face of the package: up to 25 m 5. Thickness of seal glass is 0.7 mm 0.1 mm, and the refractive index is 1.50. 6. Package weight: 0.55 g (typ.)
8
(2.50)
(2.50)
SMD00002BEC
3.30.15
(1.30)
0.250.05
(0.7)
1
7
10.160.25
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of MN39160FH

	To Download MN39160FH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .