|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD -90719B IRGMC50U INSULATED GATE BIPOLAR TRANSISTOR Features * * * * * Electrically Isolated and Hermetically Sealed Simple Drive Requirements Latch-proof Fast Speed operation > 10 kHz Switching-loss rating includes all "tail" losses C Ultra Fast Speed IGBT VCES = 600V G E VCE(on) max = 3.0V @VGE = 15V, IC = 20A Description n-channel Insulated Gate Bipolar Transistors (IGBTs) from International Rectifier have higher usable current densities than comparable bipolar transistors, while at the same time having simpler gate-drive requirements of the familiar power MOSFET. They provide substantial benefits to a host of high-voltage, high-current applications. The performance of various IGBTs varies greatly with frequency. Note that IR now provides the designer with a speed benchmark (fIc/2, or the "half-current frequency "), as well as an indication of the current handling capability of the device. TO-254AA Absolute Maximum Ratings Parameter VCES IC @ TC = 25C IC @ TC = 100C ICM ILM VGE PD @ TC = 25C PD @ T C = 100C TJ TSTG Collector-to-Emitter Breakdown Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Clamped Inductive Load Current Gate-to-Emitter Voltage Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Lead Temperature Weight Max. 600 35* 20 160 160 20 150 60 -55 to + 150 300 (0.063in./1.6mm from case for 10s) 9.3 (typical) Units V A V W C g *Current is limited by pin diameter Thermal Resistance Parameter R thJC RthCS RthJA Junction-to-Case Case-to-Sink Junction-to-Ambient Min Typ Max Units -- -- -- -- 0.83 0.12 -- -- 48 C/W Test Conditions For footnotes refer to the last page www.irf.com 1 02/20/02 IRGMC50U Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter Min. Typ. Collector-to-Emitter Breakdown Voltage 600 --- Emitter-to-Collector Breakdown Voltage 23 --- V(BR)CES/TJ Temperature Coeff. of Breakdown Voltage --- 0.6 --- --- VCE(ON) Collector-to-Emitter Saturation Voltage --- 2.4 --- 1.9 VGE(th) Gate Threshold Voltage 3.0 --- VGE(th)/TJ Temperature Coeff. of Threshold Voltage --- -13 gfe Forward Transconductance T 16 --- --- --- ICES Zero Gate Voltage Collector Current --- --- IGES Gate-to-Emitter Leakage Current --- --- V(BR)CES V(BR)ECS Max. Units Conditions --- V VGE = 0V, IC = 1.0 mA --- V VGE = 0V, IC = 1.0 A --- V/C VGE = 0V, IC = 1.0 mA VGE = 15V 3.0 IC = 20A --- IC = 35A See Fig.5 V --- IC = 20A , TJ = 125C 5.5 VCE = VGE, IC = 250 A --- mV/C VCE = VGE, IC = 250 A --- S VCE 15V, IC = 20A 50 VGE = 0V, VCE = 480V A 5000 VGE = 0V, VCE = 480V, TJ = 125C 500 nA VGE = 20V Switching Characteristics @ TJ = 25C (unless otherwise specified) Qg Qge Qgc td(on) tr td(off) tf Eon Eoff Ets td(on) tr td(off) tf Ets LC+LE Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Total Inductance Min. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Max. Units Conditions 140 IC = 20A 35 nC VCC = 300V See Fig. 8 70 VGE = 15V 50 IC = 20A, VCC = 480V 75 VGE = 15V, RG = 2.35 ns 300 Energy losses include "tail" 210 See Fig. 9, 10 & 13 --- mJ --- 2.8 --- TJ = 125C --- IC = 20A, VCC = 480V ns --- VGE = 15V, RG = 2.35 --- Energy losses include "tail" --- mJ See Fig. 11, 13 --- nH Measured from Collector lead (6mm/ 0.25in. from package) to Emitter lead (6mm / 0.25in. from package) --- 2900 --- VGE = 0V --- 330 --- pF VCC = 30V See Fig. 7 --- 41 --- = 1.0MHz Typ. 115 15 35 --- --- --- --- 0.12 1.6 1.7 24 27 180 130 2.7 6.8 Cies Coes Cres Input Capacitance Output Capacitance Reverse Transfer Capacitance Note: Corresponding Spice and Saber models are available on the Website. For footnotes refer to the last page 2 www.irf.com IRGMC50U Fig. 1 - Typical Load Current vs. Frequency (For square wave, I=IRMS of fundamental; for triangular wave, I=IPK) Fig. 2 - Typical Output Characteristics Fig. 3 - Typical Transfer Characteristics www.irf.com 3 IRGMC50U Fig. 4 - Maximum Collector Current vs. Case Temperature Fig. 5 - Collector-to-Emitter Voltage vs. Junction Temperature Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case 4 www.irf.com IRGMC50U Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage Fig. 9 - Typical Switching Losses vs. Gate Resistance Fig. 10 - Typical Switching Losses vs. Junction Temperature www.irf.com 5 IRGMC50U 125C Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current 6 www.irf.com IRGMC50U L 50V 1 00 0V VC * D .U .T. RL = 0 - 480V 480V 4 X IC@25C 480F 960V R Q * Driver s am e ty pe as D .U .T.; Vc = 80% of V ce (m ax ) * Note: D ue to the 50V pow er s upply, pulse w idth a nd inductor w ill inc rea se to obta in ra ted Id. Fig. 12a - Clamped Inductive Load Test Circuit Fig. 12b - Pulsed Collector Current Test Circuit IC L D river* 50V 1000V Q R S * Driver same type as D.U.T., VC = 480V D .U .T. VC Fig. 13a - Switching Loss Test Circuit Q R 9 0% S 1 0% 90 % VC t d (o ff) Fig. 13b - Switching Loss Waveforms 10 % IC 5% t d (o n ) tr E on E ts = ( Eo n +E o ff ) tf t=5 s E o ff www.irf.com 7 IRGMC50U Notes: Q Repetitive rating; VGE = 20V, pulse width limited by max. junction temperature. S Pulse width 80s; duty factor 0.1%. T Pulse width 5.0s, single shot. R VCC = 80%(VCES), VGE = 20V, L = 10H, RG = 10 Case Outline and Dimensions -- TO-254AA 0.12 [.005] 3.78 [.149] 3.53 [.139] A 13.84 [.545] 13.59 [.535] 6.60 [.260] 6.32 [.249] 1.27 [.050] 1.02 [.040] 3.78 [.149] 3.53 [.139] A 13.84 [.545] 13.59 [.535] 6.60 [.260] 6.32 [.249] 1.27 [.050] 1.02 [.040] 0.12 [.005] 17.40 [.685] 16.89 [.665] 1 2 3 20.32 [.800] 20.07 [.790] 13.84 [.545] 13.59 [.535] B 22.73 [.895] 21.21 [.835] 17.40 [.685] 16.89 [.665] 1 2 3 20.32 [.800] 20.07 [.790] 13.84 [.545] 13.59 [.535] B R 1.52 [.060] C 17.40 [.685] 16.89 [.665] 0.84 [.033] MAX. 4.82 [.190] 3.81 [.150] 3.81 [.150] 4.06 [.160] 3.56 [.140] 3X 1.14 [.045] 0.89 [.035] 0.36 [.014] B A 3X 3.81 [.150] 2X 1.14 [.045] 0.89 [.035] 0.36 [.014] BA 3.81 [.150] 2X NOTE S : 1. 2. 3. 4. DIMENS IONING & TOLERANCING PER AS ME Y14.5M-1994. ALL DIMENS IONS ARE S HOWN IN MILLIMET ERS [INCHES ]. CONT ROLLING DIMENS ION: INCH. CONF ORMS T O JEDEC OUT LINE T O-254AA. LEGEND 1 = COLLECTOR 2 = EMITTER 3 = GATE CAUTION BERYLLIA WARNING PER MIL-PRF-19500 Packages containing beryllia shall not be ground, sandblasted, machined or have other operations performed on them which will produce beryllia or beryllium dust. Furthermore, beryllium oxide packages shall not be placed in acids that will produce fumes containing beryllium. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 02/02 8 www.irf.com |
Price & Availability of IRGMC50U |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |