 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by BFR93ALT1/D The RF Line NPN Silicon High-Frequency Transistors Designed primarily for use in high-gain, low-noise, small-signal UHF and microwave amplifiers constructed with thick and thin-film circuits using surface mount components. * T1 Suffix Indicates Tape and Reel Packaging of 3,000 Units per Reel. BFR93ALT1 RF TRANSISTORS NPN SILICON MAXIMUM RATINGS Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current -- Continuous Maximum Junction Temperature Power Dissipation, Tcase = 75C (2) Derate linearly above Tcase = 75C @ Symbol VCEO VCBO VEBO IC TJmax PD(max) Value 12 15 2.0 35 150 0.306 4.08 Unit Vdc Vdc Vdc mAdc C W mW/C THERMAL CHARACTERISTICS Characteristic Storage Temperature Thermal Resistance Junction to Case Symbol Tstg RJC Max - 55 to +150 245 Unit C C/W CASE 318-08, STYLE 6 SOT-23 LOW PROFILE DEVICE MARKING BFR93ALT1 = R2 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (1) (IC = 10 mA) Collector-Base Breakdown Voltage (IC = 10 A) Emitter-Base Breakdown Voltage (IC = 100 A) Collector Cutoff Current (VCE = 10 V) Collector Cutoff Current (VCB = 10 V) V(BR)CEO V(BR)CBO V(BR)EBO ICEO ICBO 12 15 2.0 -- -- -- -- -- 50 50 Vdc Vdc Vdc nA nA ON CHARACTERISTICS DC Current Gain (1) (IC = 30 mA, VCE = 5.0 V) Collector-Emitter Saturation Voltage (1) (IC = 35 mA, IB = 7.0 mA) Base-Emitter Saturation Voltage (1) (IC = 35 mA, IB = 7.0 mA) hFE VCE(sat) VBE(sat) 40 -- -- -- 0.5 1.2 -- Vdc Vdc NOTES: 1. Pulse Width 300 s, Duty Cycle 2.0%. 2. Case temperature measured on collector lead immediately adjacent to body of package. REV 7 (c)MOTOROLA RF DEVICE DATA Motorola, Inc. 1995 BFR93ALT1 1 ELECTRICAL CHARACTERISTICS -- continued (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit SMALL-SIGNAL CHARACTERISTICS Current-Gain -- Bandwidth Product (IC = 30 mA, VCE = 5.0 V, f = 500 MHz) Noise Figure (VCE = 5.0 V, IC = 2.0 mA, RS = 50 , f = 30 MHz) fT NF 3.0 -- -- 3.0 GHz dB PACKAGE DIMENSIONS A L 3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. BS 1 2 V G C D H K J DIM A B C D G H J K L S V INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR CASE 318-08 ISSUE AE Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 BFR93ALT1 2 *BFR93ALT1/D* BFR93ALT1/D MOTOROLA RF DEVICE DATA |
Price & Availability of BFR93ALT1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |