 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Bi-Color(Multi-Color) 15-22SDRVGC/S530-A2/TR8 Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. Descriptions The 15-22 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Type Material Emitted Color Lens Color SDR VG AlGaInP GaP Super Deep-Red Water Clear Green Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date:08-04-2004 Rev. 1.0 Page: 1 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 Package Outline Dimensions RED - + + Notes: Tolerances Unless Dimension 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 2 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Parameter Luminous Intensity Viewing Angle Peak Wavelength VG Symbol VR IF Topr Tstg Tsol ESD Pd Rating 5 SDR:25 VG:30 -40 ~ +85 -40 ~ +90 260 (for 5 second) 2000 SDR:60 VG:100 SDR:60 VG:60 Unit V mA V mW IFP mA Electro-Optical Characteristics (Ta=25) Symbol Iv SDR: VG: Min. Typ. Max. ------ Unit mcd deg nm nm Condition 15.0 7.00 --------------------- 26.0 13.0 140 650 570 639 571 20 30 2.0 2.1 ----- 21/2 p SDR --------------------2.4 2.4 10 d Dominant Wavelength SDR VG IF=20mA Spectrum Radiation Bandwidth SDR VG nm Forward Voltage VF SDR VG --------- V A VR=5V Reverse Current IR Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 3 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 Typical Electro-Optical Characteristics Curves SDR Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 4 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 Typical Electro-Optical Characteristics Curves VG Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 5 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 6 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 7 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85% RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. Ac/Re 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 8 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Lead solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 9 of 11 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-22SDRVGC/S530-A2/TR8 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-152 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 2Page: 10 of 11 Prepared by : Kenny Wang |
Price & Availability of S530-A2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |