View TLP296G_402284.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP296G
TOSHIBA Photocoupler Photo Relay
TLP296G
Telecommunication Data Acquisition Measurement Instrumentation
Unit in mm
The TOSHIBA TLP296G consists of gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a 8 lead DIP package (DIP8). The TLP296G is a bi-directional switch which can replace mechanical relay in many applications.
* * * * * * *
8 pin DIP (DIP8), 2 channel type (2-form-A) Peak off-state voltage: 400 V (min.) Trigger LED current: 5 mA (max.) On-state current: 100 mA (max.) On-state resistance: 30 (max.) Isolation voltage: 2500 Vrms (min.) Trigger LED current (Ta = 25C)
Trigger LED Current (mA) Classification @ION = 100 mA Min. (IFT2) Standard Max. 2 5 T2 T2, blank
TOSHIBA Weight: 0.54 g
11-10C4
Marking Of Classification
Pin Configuration (top view)
(*): Ex. Rank IFT2: TLP296G (IFT2)
1
2002-09-25
TLP296G
Maximum Ratings (Ta = 25C)
Characteristic Forward current Forward current derating (Ta 25C) LED Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage Detector On-state current On-state current derating (Ta 25C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min., R.H. 60%) Note 2 Both channel One channel Both channel One channel Note 1 Note 1 Symbol IF IF / C IFP VR Tj VOFF ION Rating 50 -0.5 1 5 125 400 100 120 -1.0 -1.2 125 -55~125 -20~85 260 2500 Unit mA mA / C A V C V mA
ION / C Tj Tstg Topr Tsol BVS
mA / C C C C C Vrms
(Note 1): Two channels operationg simultaneously. (Note 2): Device considered a two-terminal device: Pins 1, 2, 3and 4 shorted together and pins 5, 6, 7and 8 shorted together.
Recommended Operating Conditions
Characteristic Supply voltage Forward current On-state current Operating temperature Symbol VDD IF ION Topr Min. 7.5 -20 Typ. 15 Max. 320 25 100 80 Unit V mA mA C
2
2002-09-25
TLP296G
Individual Electrical Characteristics (Ta = 25C)
Characteristic Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 400 V V = 0, f = 1 MHz Min. 1.0 Typ. 1.15 30 Max. 1.3 10 1 Unit V A pF A pF
Coupled Electrical Characteristics (Ta = 25C)
Characteristic Trigger LED current On-state resistance Symbol IFT RON Test Condition ION = 100 mA ION = 100 mA, IF = 10 mA Min. Typ 2 20 Max. 5 30 Unit mA
Isolation Characteristics (Ta = 25C)
Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second (in oil) DC, 1 minute (in oil) Min. 5 10
10
Typ. 0.8 10
14
Max.
Unit pF Vrms Vdc
2500
5000 5000
Switching Characteristics (Ta = 25C)
Characteristic Turn-on time Turn-off time Symbol tON tOFF Test Condition RL = 200 VDD = 20 V, IF = 10 mA (Note 1) Min. Typ. Max. 4 4 Unit ms
(Note 1): Switching time test circuit
3
2002-09-25
TLP296G
4
2002-09-25
TLP296G
5
2002-09-25
TLP296G
RESTRICTIONS ON PRODUCT USE
000707EBC
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice.
6
2002-09-25

▲Up To Search▲

Price & Availability of TLP296G

	To Download TLP296G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .