View 1N4931_421114.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

* 19.2 VOLT NOMINAL ZENER VOLTAGE + 5% * TEMPERATURE COMPENSATED ZENER REFERENCE DIODES * LOW NOISE * METALLURGICALLY BONDED * DOUBLE PLUG CONSTRUCTION
1N4916 thru 1N4932A
MAXIMUM RATINGS
Operating Temperature: -65C to +175C Storage Temperature: -65C to +175C DC Power Dissipation: 500mW @ +50C Power Derating: 4 mW / C above +50C
REVERSE LEAKAGE CURRENT
lR = 15 A @ 25C & VR = 12Vdc ELECTRICAL CHARACTERISTICS @ 25C, unless otherwise speci1/2ed.
JEDEC TYPE NUMBER
TEST CURRENT l ZT (Note 3) mA 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 2.0 2.0 2.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
VOLTAGE TEMPERATURE STABILITY VZT (Note 2) mV 144 298 72 149 29 60 144 298 72 149 29 60 144 298 72 149 29 60 144 298 72 149 29 60 14 30 144 298 72 149 29 60 14 30
TEMPERATURE RANGE
EFFECTIVE TEMPERATURE COEFFICIENT
MAXIMUM DYNAMIC IMPEDANCE ZZT (Note 1) OHMS 600 600 600 600 600 600 300 300 300 300 300 300 150 150 150 150 150 150 75 75 75 75 75 75 75 75 36 36 36 36 36 36 36 36
MAXIMUM NOISE DENSITY ND
C +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100 +25 to +100 -55 to +100
%/C 0.01 0.01 0.005 0.005 0.002 0.002 0.01 0.01 0.005 0.005 0.002 0.002 0.01 0.01 0.005 0.005 0.002 0.002 0.01 0.01 0.005 0.005 0.002 0.002 0.001 0.001 0.01 0.01 0.005 0.005 0.002 0.002 0.001 0.001
V
Hz
1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20
1N4916 1N4916A 1N4917 1N4917A 1N4918 1N4918A 1N4919 1N4919A 1N4920 1N4920A 1N4921 1N4921A 1N4922 1N4922A 1N4923 1N4923A 1N4924 1N4924A 1N4925 1N4925A 1N4926 1N4926A 1N4927 1N4927A 1N4928 1N4928A 1N4929 1N4929A 1N4930 1N4930A 1N4931 1N4931A 1N4932 1N4932A
FIGURE 1
DESIGN DATA
CASE: Hermetically sealed glass case. DO - 35 outline. LEAD MATERIAL: Copper clad steel. LEAD FINISH: Tin / Lead POLARITY: Diode to be operated with the banded (cathode) end positive. MOUNTING POSITION: Any.
NOTE 1 Zener impedance is derived by superimposing on lZT A 60Hz rms a.c. current equal to 10% of lZT. NOTE 2 The maximum allowable change observed over the entire temperature range i.e.,the diode voltage will not exceed the speci1/2ed mV at any discrete temperature between the established limits, per JEDEC standard No.5. NOTE 3 Zener voltage range equals 19.2 volts + 5%.
6 LAKE STREET, LAWRENCE, MASSACHUSETTS 01841 PHONE (978) 620-2600 FAX (978) 689-0803 WEBSITE: http://www.microsemi.com
55
1N4916
1000 ZENER IMPEDANCE ZZT (OHMS) 500
thru
1N4932A
200
100
50
20 10 2 4 6 8 10 12 OPERATING CURRENT lZT (mA)
FIGURE 2
ZENER IMPEDANCE VS. OPERATING CURRENT
CHANGE IN TEMPERATURE COEFFICIENT ( %/C)
1N4916--1N4918
+.0015 +.0010 +.0005 0 -.0005 -.0010 -.0015 .2 .4 .6 .8 OPERATING CURRENT lZT (mA)
1N4919--1N4921
1N4922--1N4924
0.5 1.0 1.5 2.0 OPERATING CURRENT lZT (mA)
1.0 2.0 3.0 4.0 OPERATING CURRENT lZT (mA)
1N4925--1N4928
CHANGE IN TEMPERATURE COEFFICIENT ( %/C) +.0015 +.0010 +.0005 0 -.0005 -.0010 -.0015
1N4929--1N4932
2 3 4 5 6 OPERATING CURRENT lZT (mA)
6 7 8 9 OPERATING CURRENT lZT (mA)
FIGURE 3
TYPICAL CHANGE OF TEMPERATURE COEFFICIENT WITH CHANGE IN OPERATING CURRENT 56
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 1N4931

	To Download 1N4931 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .