View 74ALS651N_443186.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74ALS651/74ALS651-1 74ALS652/74ALS652-1 Transceiver/register
Product specification IC05 Data Handbook 1991 Feb 08
Philips Semiconductors
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/651-1 74ALS652/652-1
FEATURES
74ALS651/74ALS651-1 74ALS652/74ALS652-1
Octal transceiver/register, inverting (3-State) Octal transceiver/register, non-inverting (3-State)
TYPE 74ALS651/74ALS651-1 74ALS652/74ALS652-1 TYPICAL fMAX 140MHz 140MHz TYPICAL SUPPLY CURRENT (TOTAL) 40mA 46mA
* Independent registers for A and B buses * Multiplexed real-time and stored data * Choice of non-inverting and inverting data paths * 3-State outputs * The -1 versions sinks 48mA IOL within the 5% VCC range
DESCRIPTION
The 74LAS651 and 74ALS652 transceivers/registers consist of bus transceiver circuits with 3-State outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or the internal registers. Data on the A or B bus will be clocked into the registers as the appropriate clock pin goes High. Output enable (OEAB, OEBA) and select (SAB, SBA) pins are provided for bus management. The 74LAS651-1 and 74ALS652-1 will sink 48mA if the VCC is limited to 5.0V 0.25V.
ORDERING INFORMATION
ORDER CODE DESCRIPTION COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C 74ALS651N, 74ALS651-1N, 74ALS652N, 74ALS652-1N 74ALS651D, 74ALS651-1D, 74ALS652D, 74ALS652-1D DRAWING NUMBER
24-pin plastic DIP 24-pin plastic SOL
SOT222-1 SOT137-1
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS A0 - A7 B0 - B7 CPAB CPBA SAB SBA OEAB OEBA A0 - A7, B0 - B7 A0 - A7, B0 - B7 A inputs B inputs A-to-B clock input B-to-A clock input A-to-B select input B-to-A select input A-to-B output enable input B-to-A output enable input A, B outputs A, B outputs (-1 version) DESCRIPTION 74ALS (U.L.) HIGH/LOW 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 750/240 750/480 LOAD VALUE HIGH/LOW 70A/0.1mA 70A/0.1mA 20A/0.1mA 20A/0.1mA 20A/0.1mA 20A/0.1mA 20A/0.1mA 20A/0.1mA 15mA/24mA 15mA/48mA
NOTE: One (1.0) ALS unit load is defined as: 20A in the High state and 0.1mA in the Low state.
1991 Feb 08
2
853-1407 01670
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
PIN CONFIGURATION - 74ALS651/651-1
CPAB SAB OEAB A0 A1 A2 A3 A4 A5 1 2 3 4 5 6 7 8 9 24 VCC 23 CPBA 22 SBA 21 OEBA 20 B0 19 B1 18 B2 17 B3 16 B4 15 B5 14 B6 13 B7
PIN CONFIGURATION - 74ALS652/652-1
CPAB SAB OEAB A0 A1 A2 A3 A4 A5 1 2 3 4 5 6 7 8 9 24 VCC 23 CPBA 22 SBA 21 OEBA 20 B0 19 B1 18 B2 17 B3 16 B4 15 B5 14 B6 13 B7
A6 10 A7 11 GND 12
A6 10 A7 11 GND 12
SC00127
SC00128
LOGIC SYMBOL - 74ALS651/651-1
4 5 6 7 8 9 10 11
LOGIC SYMBOL - 74ALS652/652-1
4 5 6 7 8 9 10 11
A0 A1 A2 A3 A4 A5 A6 A7 1 2 3 23 22 21 CPAB SAB OEAB CPBA SBA OEBA B0 B1 B2 B3 B4 B5 B6 B7 1 2 3 23 22 21
A0 A1 A2 A3 A4 A5 A6 A7 CPAB SAB OEAB CPBA SBA OEBA B0 B1 B2 B3 B4 B5 B6 B7
VCC = Pin 24 GND = Pin 12
20
19
18
17
16
15
14
13
SC00129
VCC = Pin 24 GND = Pin 12
20
19
18
17
16
15
14
13
SC00130
IEC/IEEE SYMBOL - 74ALS651/651-1
21 3 23 22 1 2 EN1 [AB] G3 G5 C6 G7 1 1 6D 5 6 7 8 9 10 11 1 7 7 5 5 1 1 2 19 18 17 16 15 14 13 4D 20 EN1 [BA]
IEC/IEEE SYMBOL - 74ALS652/652-1
21 3 23 22 1 2 EN1 [AB] G3 G5 C6 G7 1 1 6D 5 6 7 8 9 10 11 1 7 7 5 5 1 1 2 19 18 17 16 15 14 13 4D 20 EN1 [BA]
4
4
SC00131
SC00132
1991 Feb 08
3
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
BUS MANAGEMENT FUNCTIONS
The following examples demonstrate the four fundamental bus-management functions that can be performed with the 74ALS651/74ALS651-1 and 74ALS652/74ALS652-1. The select pins determine whether data is stored or transferred through the device in real time. The output enable pins determine the direction of the data flow.
STORAGE FROM A, B, OR A AND B
REAL TIME BUS TRANSFER BUS B TO BUS A
REAL TIME BUS TRANSFER BUS A TO BUS B
TRANSFER STORED DATA TO A AND/OR B
BUS A
BUS B
BUS A
BUS B
BUS A
BUS B
BUS A
BUS B
OEABOEBA CPAB CPBA SAB SBA L L X X X L
OEABOEBA CPAB CPBA SAB SBA H H X X L X
OEABOEBA CPAB CPBA SAB SBA X L L X X X X X X X X X X X
OEABOEBA CPAB CPBA SAB SBA H L H or L H or L H H
SC00133
1991 Feb 08
4
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
LOGIC DIAGRAM - 74ALS651/651-1
OEBA OEAB CPBA SBA SPAB SAB 21 3 23 22 1 2
LOGIC DIAGRAM - 74ALS652/652-1
OEBA OEAB CPBA SBA SPAB SAB 21 3 23 22 1 2
1 OF 8 CHANNELS
1D C1
1 OF 8 CHANNELS
1D C1
4 A0 1D C1
20 B0
4 A0 1D C1
20 B0
VCC = Pin 24 GND = Pin 12
TO 7 OTHER CHANNELS
SC00134
VCC = Pin 24 GND = Pin 12
TO 7 OTHER CHANNELS
SC00135
FUNCTION TABLE
INPUTS OEAB L L X H L L L L H H H H OEBA H H H H X L L L H H L L CPAB H or L H or L X X X H or L H or L H or L CPBA H or L H or L X H or L X X H or L H or L SAB X X X L X X X X L H H H SBA X X X X S L L H X X H H An Input Input Input Input Unspecified* Output Output Output Input Input Output Output DATA I/O Bn Input Input Unspecified* Output Input Input Input Input Output Output Output Output OPERATING MODE 74ALS651/74ALS651-1 Isolation Store A and B data Store A, hold B Store A in both registers Hold A, store B Store B in both registers Real time B data to A bus Stored B data to A bus Real time A data to B bus Stored A data to B bus Stored A data to B bus Stored B data to A bus 74ALS652/74ALS652-1 Isolation Store A and B data Store A, hold B Store A in both registers Hold A, store B Store B in both registers Real time B data to A bus Stored B data to A bus Real time A data to B bus Stored A data to B bus Stored A data to B bus Stored B data to A bus
NOTES: H = High voltage level L = Low voltage level X = Don't care * = The data output function may be enabled or disabled by various signals at the OE and DIR inputs. Data input functions are always enabled, i.e., data at the bus pins will be stored on every Low-to-High transition of the clock. = Low-to-High clock transition
1991 Feb 08
5
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IO OUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in High output state All versions Current applied to output in Low output state Operating free-air temperature range Storage temperature range -1 version PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to VCC 48 96 0 to +70 -65 to +150 UNIT V V mA V mA mA C C
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC VIH VIL IIK IOH IO OL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current All versions Low-level Low level output current Operating free-air temperature range -1 version 0 PARAMETER MIN 4.5 2.0 0.8 -18 -15 24 48 1 +70 LIMITS NOM 5.0 MAX 5.5 UNIT V V V mA mA mA mA C
NOTE: 1. The 48mA limit applies only under the condition of VCC = 5.0V 5%.
1991 Feb 08
6
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS1 VCC10%, VIL = MAX, , , VIH = MIN VCC = MIN, VIL = MAX, VIH = MIN Low-level output lt voltage Input clamp voltage Input current at maximum input voltage High-level input current3 Low-level input Output current4 74ALS651/ 74ALS651 1 74ALS651-1 ICC Supply current (total) 74ALS652/ 74ALS652-1 ICCH ICCL ICCZ ICCH ICCL ICCZ VCC = MAX VCC = MAX current3 control inputs A or B ports All versions -1 versions VIK II IIH IIL IO VCC = MIN, VIL = MAX, , , VIH = MIN VCC = 4.75V, VIL = MAX, VIH = MIN VCC = MIN, II = IIK VCC = MAX, VI = 7.0V VCC = MAX, VI = 5.5V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.4V VCC = MAX, VO = 2.25V -30 32 45 44 36 53 49 IOH = -0.4mA IOH = -3mA IOH = -15mA IOL = 12mA IOL = 24mA IOL = 48mA LIMITS MIN VCC - 2 2.4 2.0 0.25 0.35 0.35 -0.73 0.40 0.50 0.50 -1.5 0.1 0.1 20 -0.1 -112 50 68 68 58 78 72 3.2 TYP2 MAX UNIT V V V V V V V mA mA A mA mA mA mA mA mA mA mA
VOH
High level output High-level out ut voltage
VOL
NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. For I/O ports, the parameter IIH and IIL include the off-state current. 4. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
AC ELECTRICAL CHARACTERISTICS FOR 74ALS651/74ALS651-1
LIMITS SYMBOL PARAMETER TEST CONDITION Tamb = 0C to +70C VCC = +5.0V 10% CL = 50pF, RL = 500 MIN fmax tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPZH tPZL tPHZ tPLZ tPZH tPZL tPHZ tPLZ Maximum clock frequency Propagation delay CPBA to An, CPAB to Bn Propagation delay An to Bn or Bn to An Propagation delay SBA to An or SAB to Bn (A or B Low) Propagation delay SBA to An or SAB to Bn (A or B High) Output enable time OEBA to An Output disable time OEBA to An Output enable time OEAB to Bn Output disable time OEAB to Bn Waveform 1 Waveform 1 Waveform NO TAG, 3 Waveform NO TAG, 3 Waveform NO TAG, 3 Waveform 7 Waveform 8 Waveform 7 Waveform 8 Waveform 7 Waveform 8 Waveform 7 Waveform 8 100 5.0 6.0 1.0 2.0 6.0 5.0 4.0 5.0 2.0 5.0 2.0 3.0 2.0 5.0 3.0 5.0 13.0 13.0 7.0 9.0 14.0 11.0 11.0 12.0 8.0 12.0 8.0 10.0 9.0 12.0 11.0 13.0 MAX MHz ns ns ns ns ns ns ns ns UNIT
1991 Feb 08
7
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
AC ELECTRICAL CHARACTERISTICS FOR 74ALS652/74ALS652-1
LIMITS SYMBOL PARAMETER TEST CONDITION Tamb = 0C to +70C VCC = +5.0V 10% CL = 50pF, RL = 500 MIN fmax tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPZH tPZL tPHZ tPLZ tPZH tPZL tPHZ tPLZ Maximum clock frequency Propagation delay CPBA to An, CPAB to Bn Propagation delay An to Bn or Bn to An Propagation delay SBA to An or SAB to Bn (A or B Low) Propagation delay SBA to An or SAB to Bn (A or B High) Output enable time OEBA to An Output disable time OEBA to An Output enable time OEAB to Bn Output disable time OEAB to Bn Waveform 1 Waveform 1 Waveform NO TAG, 3 Waveform NO TAG, 3 Waveform NO TAG, 3 Waveform 7 Waveform 8 Waveform 7 Waveform 8 Waveform 7 Waveform 8 Waveform 7 Waveform 8 100 5.0 6.0 2.0 4.0 4.0 5.0 6.0 5.0 2.0 5.0 2.0 3.0 2.0 5.0 3.0 5.0 13.0 13.0 8.0 9.0 11.0 11.0 14.0 11.0 8.0 11.0 8.0 10.0 9.0 11.0 11.0 13.0 MAX MHz ns ns ns ns ns ns ns ns UNIT
AC SETUP REQUIREMENTS
LIMITS SYMBOL PARAMETER TEST CONDITION Tamb = 0C to +70C VCC = +5.0V 10% CL = 50pF, RL = 500 MIN tsu (H) tsu (L) th (H) th (L) tsu (H) tsu (L) th (H) th (L) tw (H) tw (L) Setup time, High or Low An or Bn to CPAB or CPBA Hold time, High or Low An or Bn to CPAB or CPBA Setup time, High or Low1 OEBA to OEAB or OEAB to OEBA Hold time, High or Low OEBA to OEAB or OEAB to OEBA Pulse width, High or Low CPAB or CPBA Waveform 4 Waveform 4 Waveform 5, 6 Waveform 5, 6 Waveform 1 5.0 5.0 0.0 1.0 5.0 5.0 0.0 0.0 6.0 4.0 MAX ns ns ns ns ns UNIT
NOTE: 1. Setup time is to protect against current surge caused by enabling 16 outputs (24mA per output) simultaneously.
1991 Feb 08
8
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
AC WAVEFORMS
For all waveforms, VM = 1.3V. The shaded areas indicate when the input is permitted to change for predictable output performance.
1/fmax CPBA or CPAB VM tw(H) tPHL VM VM tw(L) VM tPHL tPLH VM VM VM tPLH An or Bn SBA or SAB
VM
VM
An or Bn
Bn or An
An or Bn
SF00394
SF00395
Waveform 1. Propagation Delay for Clock Input to Output, Clock Pulse Width, and Maximum Clock Frequency
Waveform 2.
Propagation Delay for An to Bn or Bn to An and SAB or SBA to An or Bn
An or Bn
VM tPLH
VM tPHL VM VM
SBA or SAB
An or Bn
VM tsu(H)
VM th(H)
VM tsu(L)
VM th(L) VM
Bn or An
An or Bn
CPBA or CPAB
VM
SF00396
SF00397
Waveform 3.
Propagation Delay for An to Bn or Bn to An and SAB or SBA to An or Bn
Waveform 4.
Data Setup Time and Hold Times
OEBA
VM tsu(L)
VM th(L) VM
OEAB
VM tsu(H)
VM th(H)
OEAB OEBA VM
SF00410
SF00411
Waveform 5.
OEBA to OEAB Setup Time and Hold Times
Waveform 6.
OEBA
OEAB to OEBA Setup Time and Hold Times
OEBA VM OEAB tPZH An or Bn VM 0V tPHZ VOH -0.3V VM
VM OEAB tPZL An or Bn VM
VM tPLZ
VOL +0.3V
SF00412
SF00413
Waveform 7. 3-State Output Enable Time to High Level and Output Disable Time from High Level
Waveform 8. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level
1991 Feb 08
9
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
TEST CIRCUIT AND WAVEFORMS
VCC 7.0V NEGATIVE PULSE 90% VM 10% tTHL (tff) CL RL tw VM 10% tTLH (tr ) 0.3V 90% AMP (V)
VIN PULSE GENERATOR RT D.U.T.
VOUT
RL
tTLH (tr ) 90%
tTHL (tf ) AMP (V) 90% VM tw 10% 0.3V
Test Circuit for 3-State and Open Collector Outputs SWITCH POSITION TEST SWITCH closed tPLZ, tPZL open collector All other closed open
POSITIVE PULSE 10%
VM
Input Pulse Definition INPUT PULSE REQUIREMENTS Family Amplitude VM 74ALS 3.5V 1.3V Rep.Rate 1MHz tw 500ns tTLH 2.0ns tTHL 2.0ns
DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
SC00126
1991 Feb 08
10
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
SOT222-1
DIP24: plastic dual in-line package; 24 leads (300 mil)
1991 Feb 08
11
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
SOT137-1
SO24: plastic small outline package; 24 leads; body width 7.5 mm
1991 Feb 08
12
Philips Semiconductors
Product specification
Transceiver/register
74ALS651/74ALS651-1 74ALS652/74ALS652-1
DEFINITIONS
Data Sheet Identification
Objective Specification
Product Status
Formative or in Design
Definition
This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.
Preliminary Specification
Preproduction Product
Product Specification
Full Production
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1997 All rights reserved. Printed in U.S.A.
Philips Semiconductors
1991 Feb 08 13

▲Up To Search▲

Price & Availability of 74ALS651N

	To Download 74ALS651N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .