 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RF (Radio Frequency) Type [1-Channel (Form A) Type] --Low On resistance-- FEATURES 8.80.05 .346.002 6.40.05 .252.002 3.90.2 .154.008 6.40.05 .252.002 3.60.2 .142.008 PhotoMOS RELAYS 4. Low-level off state leakage current The SSR has an off state leakage current of several milliamperes, whereas the PhotoMOS relay has only 30 pA even with the rated load voltage of 80 V (AQV225N). 5. Controls low-level analog signals PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 6. Low terminals electromotive force (approx. 1 V) 8.80.05 .346.002 mm inch 1 2 3 6 5 4 1. PhotoMOS relay with high response speed, low leakage current and low On resistance 2. Low capacitance between output terminals ensures high response speed: The capacitance between output terminals is small, typically 10 pF. This enables for a fast operation speed of 200 s. 3. High sensitivity and low On resistance Maximum 0.3 A of load current can be controlled with input current of 5 mA. The 10 (AQV225N) On resistance is less than our conventional models. With no metallic contacts, the PhotoMOS relay has stable switching characteristics. TYPES Part No. Output rating* Type Load voltage 80 V AC/DC type 200 V 400 V Load current 150 mA 70 mA 50 mA Through hole terminal Tube packing style AQV225N AQV227N AQV224N Surface-mount terminal *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING Item 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Input LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) w w w t a .D AQV225NA AQV227NA AQV224NA S a Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQV225NAX AQV225NAZ AQV227NAZ AQV224NAZ AQV227NAX AQV224NAX e h U t4 e TYPICAL APPLICATIONS * Measuring devices * Scanner, IC checker, Board tester .c m o Packing quantity Tube 1 tube contains 50 pcs. 1 batch contains 500 pcs. Tape and reel 1,000 pcs. Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Operating Storage Type of Symbol connection IF VR IFP Pin VL A IL B C Ipeak Pout PT Viso Topr Tstg AQV225N(A) AQV227N(A) 50 mA 3V 1A 75 mW 200 V 0.07 A 0.08 A 0.10 A 0.21 A 360 mW 410 mW 1,500 V AC AQV224N(A) Remarks f = 100 Hz, Duty factor = 0.1% 400 V 0.05 A 0.06 A 0.08 A 0.15 A 80 V 0.15 A 0.20 A 0.30 A 0.45 A A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot), VL = DC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Non-condensing at low temperatures 152 w w w .D at a he S 4 et U o .c m AQV22rN 2. Electrical characteristics (Ambient temperature: 25C 77F) Item LED operate current Input LED turn off current LED dropout voltage Typical Maximum Minimum Typical Typical Maximum Typical Ron Maximum Typical On resistance Maximum Output Typical Ron Maximum Typical Output capacitance Maximum Off state leakage current Turn on time* Typical Maximum Typical ILeak Ton Toff Ciso Riso -- -- -- -- -- 30 pA Cout -- 15 pF 30 pA 10 nA 0.20 ms 0.5 ms 0.08 ms 0.2 ms 0.8 pF 1.5 pF 1,000 M 90 pA C Ron B A Type of Symbol connection IFon IFoff VF -- -- -- 7.0 10 3.5 5 1.8 2.5 AQV225N(A) AQV227N(A) AQV224N(A) Remarks IL = Max. IL = Max. IF = 5 mA 70 100 55 70 28 35 IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 VB = 0 f = 1 MHz IF = 0 VL = Max. IF = 5 mA IL = Max. IF = 5 mA IL = Max. f = 1 MHz VB = 0 500 V DC For type of connection, see page 31. 0.90 mA 3.0 mA 0.4 mA 0.85 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V 30 50 16 25 8 12.5 10 pF Transfer characteristics Maximum Switching speed Typical Turn off time* Maximum Typical I/O capacitance Maximum Initial I/O isolation resisMinimum tance Note: Recommendable LED forward current IF = 5mA. *Turn on/Turn off time Input 90% Output Ton Toff 10% s For Dimensions, see Page 27. s For Schematic and Wiring Diagrams, see Page 31. s For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A 2.-(1) On resistance vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 12.0 2.-(2) On resistance vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 100 80 60 40 20 0 AQV227N AQV224N 150 Load currnt, mA AQV225N On resistance, AQV225N 8.0 6.0 4.0 2.0 0 100 AQV227N 50 AQV224N 0 -40 -20 0 20 40 60 80 85100 Ambient temperature, C On resistance, 10.0 -40 -20 0 20 40 60 80 85 Ambient temperature, C -40 -20 0 20 40 60 80 85 Ambient temperature, C 153 AQV22rN 3. Turn on time vs. ambient temperature characteristics Sample: AQV225N, AQV227N, AQV224N; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 1.0 4. Turn off time vs. ambient temperature characteristics Sample: AQV225N, AQV227N, AQV224N; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.5 5. LED operate current vs. ambient temperature characteristics Sample: AQV225N, AQV227N, AQV224N; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 LED operate current, mA Turn on time, ms 0.6 AQV225N 0.4 AQV227N 0.2 AQV224N Turn off time, ms 0.8 0.4 4 0.3 3 0.2 AQV225N 0.1 AQV224N AQV227N 2 AQV225N AQV227N 1 AQV224N 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C 6. LED turn off current vs. ambient temperature characteristics Sample: AQV225N, AQV227N, AQV224N; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 LED turn off current, mA 7. LED dropout voltage vs. ambient temperature characteristics Sample: All types; LED current: 5 to 50 mA 1.5 LED dropout voltage, V 1.4 1.3 1.2 1.1 1.0 0 -40 -20 8. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Current, mA 150 AQV225N 100 50 AQV227N AQV224N 4 3 -4 50mA 30mA 20mA 10mA 5mA -3 -2 -1 1 -50 -100 -150 2 3 4 Voltage, V 2 AQV225N 1 AQV224N -40 -20 AQV227N 0 80 85 0 20 40 60 Ambient temperature, C 0 20 40 60 80 85 Ambient temperature, C 9. Off state leakage current Sample: AQV225N, AQV227N, AQV224N; Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 10. LED forward current vs. turn on time characteristics Sample: AQV225N, AQV227N, AQV224N; Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 1.4 1.2 Turn on time, ms 1.0 0.8 AQV225N 0.6 0.4 0.2 AQV224N*AQV227N 11. LED forward current vs. turn off time characteristics Sample: AQV225N, AQV227N, AQV224N; Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 0.22 10-6 Off state leakage current, A Turn on time, ms 0.18 10-9 AQV224N AQV227N AQV225N 0.14 AQV224N AQV227N 0.06 0.10 AQV225N 10-12 0 100 200 300 Load voltage, V 400 0 0 10 20 30 40 50 60 LED forward current, mA 0 0 10 20 30 40 50 60 LED forward current, mA 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Frequency: 1 MHz, 30 mVrms; Ambient temperature: 25C 77F 12 Output capacitance, pF 13. Isolation characteristics (50 impedance) Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 14. Insertion loss characteristics (50 impedance) Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 6 100 10 8 6 4 2 0 AQV225N AQV227N AQV224N 0 20 40 60 80 100 Applied voltage, V Isolation, dB 80 60 40 AQV225N*AQV227N 20 0 Insertion loss, dB 5 4 3 AQV224N AQV224N AQV227N 2 1 0 AQV225N 104 105 106 Frequency, HZ 107 104 105 106 Frequency, HZ 107 5/7/2001 154 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog |
Price & Availability of AQV227N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |