 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DS1812 5V EconoReset with Active High Push-Pull Output www.dalsemi.com FEATURES Automatically restarts a microprocessor after power failure Maintains reset for 150 ms after VCC returns to an in-tolerance condition Reduces need for discrete components Precision temperature-compensated voltage reference and voltage sensor Low-cost TO-92, or space saving surface mount SOT-23 packages available Push-pull active high output Operating temperature -40C to +85C PIN ASSIGNMENT 3 1 2 SOT-23 PACKAGE See Mech. Drawing 123 123 TO-92 PACKAGE See Mech. Drawings PIN DESCRIPTION TO-92 1 2 3 RST VCC GND Active High Reset Output Power Supply Ground SOT-23 1 2 3 RST VCC GND Active High Reset Output Power Supply Ground DESCRIPTION The DS1812 EconoReset uses a precision temperature reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 150 ms to allow the power supply and processor to stabilize. 1 of 5 111999 DS1812 OPERATION - POWER MONITOR The DS1812 provides the function of detecting out-of-tolerance power supply conditions and warning a processor-based system of impending power failure. When VCC is detected as out-of-tolerance, the RST signal is asserted. On power-up, RST is kept active for approximately 150 ms after the power supply has reached the selected tolerance. This allows the power supply and microprocessor to stabilize before RST is released. BLOCK DIAGRAM (CMOS OUTPUT) Figure 1 APPLICATION EXAMPLE Figure 2 2 of 5 DS1812 TIMING DIAGRAM: POWER-UP Figure 3 TIMING DIAGRAM: POWER-DOWN Figure 4 3 of 5 DS1812 ABSOLUTE MAXIMUM RATINGS* Voltage on VCC Pin Relative to Ground Voltage on RST Relative to Ground Operating Temperature Storage Temperature Soldering Temperature * -0.5V to +7.0V -0.5V to VCC +0.5V -40C to +85C -55C to +125C 260C for 10 seconds This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. RECOMMENDED DC OPERATING CONDITIONS PARAMETER Supply Voltage SYMBOL VCC MIN 0.0 TYP MAX 5.5 (-40C to +85C) UNITS V NOTES 1 DC ELECTRICAL CHARACTERISTICS PARAMETER Output Voltage @ 0-500 A Output Current @ 2.4 volts Output Current @ 0.4 volts Operating Current VCC < 5.5 VCC Trip Point (DS1812-5) VCC Trip Point (DS1812-10) VCC Trip Point (DS1812-15) Output Capacitance SYMBOL VOH IOH IOL ICC VCCTP VCCTP VCCTP COUT (-40C to +85C; VCC=1.2V to 5.5V) MIN VCC -0.5V +10 30 4.50 4.25 4.00 4.62 4.35 4.13 40 4.75 4.49 4.24 10 TYP VCC -0.1V 350 MAX UNITS V A mA A V V V pF NOTES 1 2 2 3 1 1 1 AC ELECTRICAL CHARACTERISTICS PARAMETER RESET Active Time VCC Detect to RST VCC Slew Rate (VCCTP (MAX) to VCCTP (MIN)) VCC Slew Rate (VCCTP (MIN) to VCCTP (MAX)) VCC Detect to RST SYMBOL tRST tRPD tF tR tRPU (-40C to +85C; VCC=1.2V to 5.5V) MIN 100 300 0 100 150 300 TYP 150 2 MAX 300 5 UNITS ms s s ns ms 4 NOTES 4 of 5 DS1812 NOTES: 1. All voltages are referenced to ground. 2. Measured with VCC 2.7 volts. 3. Measured with RST output open. 4. tR = 5 s. PART MARKING CODES SOT-23 PACKAGE "A", "B", &"C" represent the device type. 810 DS1810 811 DS1811 812 DS1812 813 DS1813 815 DS1815 816 DS1816 817 DS1817 818 DS1818 "D" represents the device tolerance. A 5% B 10% C 15% D 20% 5 of 5 |
Price & Availability of DS1812-15
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |