View WKO680XCPXXX_470115.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

WKO
Vishay Draloric
aSU : RATED VOLTAGE at .D w w DIELECTRIC STRENGTH BETWEEN LEADS: w
Disc capacitors with epoxy coating
R
DESIGN:
ee h
4U t
om .c
S Max. D Max.
Ceramic AC Capacitors Class X1, 440VAC / Class Y2, 300VAC
(X1): (Y2):
440VAC, 50Hz (IEC 60384-14.2) 300VAC, 50Hz (IEC 60384-14.2) 250VAC, 60Hz (UL1414, CSA C22.2)
3 Max.
Component test: 2600VDC, 50Hz, 2s As repeated test admissible only once with 2340VAC, 50Hz, 2s Random sampling test (destructive test): 2600VAC, 50Hz, 60s
L = 30-3 or L = 101 F 1
O d 0.05 * Dimensions in mm
DIELECTRIC STRENGTH OF BODY INSULATION:
2600VAC, 50Hz, 60s (destructive test)
25 * 10-3 6 * 109
Z []
DISSIPATION FACTOR tan : INSULATION RESISTANCE Ris: CATEGORY TEMPERATURE RANGE A:
(- 40 to +125)C
Impedance (Z) as a function of frequency (f) at Ta = 20C (average). Measurement with lead length 50mm.
CLIMATIC CATEGORY ACC. TO EN60068-1:
40/125/21
COATING:
Epoxy, dipped, insulating, flame retarding acc. to UL 94V-0
TAPING AND SPECIAL LEAD CONFIGURATIONS:
On request
MARKING:
D 9mm
w
I~ [A]
w
.D w
D 10mm
WKO 2n2 M
IEC 384-14/2 440 ~ X1 250 ~ Y2
t a
10-1
10-2 1 10
f
4700pF 3900 3300 2200 1500 1000
S a
680
I = f (UR) (typ.)
800 700 600 500
470 330 220 150 100 68 47 33 pF
e h
100
101
t e
U 4
.c
m o
V 0.5
100
300
[MHz]
4.7nF
3.3nF
WKO
440 ~ X1 250 ~ Y2 33p M
400 300 200 100
2.2nF
All approval marks are also shown on the label.
0 0 50 100 150
200 250
www.vishay.com 48
For technical questions, contact slcap@vishay.com
w
w
w
.D
at
aS
1.0nF
ee h
UR[V~]
4U t
om .c
220pF
300
350 400
Document Number 22204 Revision 14-May-03
WKO
Ceramic AC Capacitors Class X1, 440VAC / ClassY2, 300VAC
CAPACITANCE (pF) 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 3900 4700 D x s Max. (mm) 7.0 x 4.5 7.0 x 4.5 7.0 x 4.5 7.0 x 4.5 7.0 x 4.5 7.0 x 4.5 7.0 x 4.5 7.0 x 4.5 9.0 x 5.0 9.0 x 5.0 10.0 x 5.0 12.0 x 5.0 13.0 x 5.0 14.5 x 5.0 14.5 x 5.0 12.5 0.8 2.1 7.5 2.0 0.6 1.9 F 1* (mm) d 0.05* (mm) V 0.5* (mm) 1.6 ORDERING CODE WKO330CPK WKO470CPK WKO680CPK WKO101CPK WKO151CPK WKO221CPK WKO331CPK WKO471CPK WKO681CPK WKO102CPK WKO152CPK WKO222CPK WKO332CPK WKO392CPK WKO472CPK K 4000 K 2000 K 1200 K 1500
Vishay Draloric
CERAMIC DIELECTRIC N 750
*Standard lead configuration, other lead spacing and diameter available on request Capacitance Tolerances: 10%, 20% Ordering Code:
7th digit: 10th/11th/12th digit:
Capacitance tolerance: Lead configuration (See General Information)
10% = K 20% = M
APPROVALS
IEC 60384-14 2nd Edition (1993) Table II & A 1 (1995-06) EN 132400 (1994) These approvals together with the CB-Test Certificate substitutes the national aproval of the nations given in the table below UL 1414 (Y2) CB-Test Certificate (X1) CB-Test Certificate Fi 338A 2 (250VAC) Fi 435 A 1 (440VAC)
(Y2) CB-Test Certificate (X1) CB-Test Certificate Across-the-line, line to ground antenna-coupling and line-by-pass capacitor 33pF to 1500pF: Across-the-line, line-to-ground and antenna isolation capacitor 2200pF to 4700pF: Antenna and line isolation capacitor
DE 1-7465 (300VAC) DE 1-7465 (440VAC)
E 183844 V1 S2 (250VAC)
CSA C22.2 No. 1-M1981
LR 64546-10 (250VAC)
This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria France Netherlands Japan Singapore Belgium Germany Israel Norway Rep. of Korea Denmark Ireland Portugal China Hungary Finland Italy Spain Poland Iceland Sweden Switzerland Great Britain Czech. Republic Slovenia
Document Number 22204 Revision 14-May-03
For technical questions, contact slcap@vishay.com
www.vishay.com 49

▲Up To Search▲

Price & Availability of WKO680XCPXXX

	To Download WKO680XCPXXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .