View NJW1136_506036.PDF datasheet online --- IC-ON-LINE


	Part Number	Hot Search : EL7154CN 4805S 80C32 OP279GP MTJ88SX1 2N1046 MBT555 SQ9407EY
	Product Description
	Full Text Search

	To Download NJW1136 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .

　

Datasheet File OCR Text:

NJW1136
PRELIMINARY
AUDIO PROCESSOR with Subwoofer Output
I GENERAL DESCRIPTION The NJW1136 is a sound processor with subwoofer output includes all of functions processing audio signal for TV, such as tone control, balance, volume, mute, and AGC functions. Also the NJW1136 includes the LPF for subwoofer output and bass boost function. The original surround system reproduces natural surround sound and clear vocal orientation. 2 All of internal status and variables are controlled by I C BUS interface. I PACKAGE OUTLINE
NJW1136GL1
NJW1136L
I FEATURES 8 to 13V G Operating Voltage NJW1136D G 3ch Output(Lch, Rch, Subwoofer ch) / 2ch Output(Lch, Rch) G LPF Filter (Adjustable cut off frequency by external parts) G AGC Circuit (It reduces volume difference among input sources.) 2 Adjustable AGC boost level by external parts and AGC compression level by I C BUS G eala(NJRC Original Surround System) G Simulated Stereo 2 G I C BUS Interface G Bi-CMOS Technology SOP32, DIP32 G Package Outline I BLOCK DIAGRAM
AGC1 SS-FIL
TONE TONE -Ha -La LF1 LF2 LF3
OUTa
SCL SDA ADR
IN a
VOL1
TONE
VOL2
I2 CBUS Interface
AGC
eal a & Simulated Stereo
CVA CVB CVW CTH CTL CSR PORT1 PORT0 AUX1 AUX0
LPF
VOL2
Trimmer
IN b
VOL1
TONE
VOL2 Bias
GND V+
AGC2
SR-FIL
TONE TONE -Hb -Lb
OUTb
OUTw
Vref
(1/24) G
NJW1136
IPIN CONFIGURATION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 INa SR-FIL SS-FIL TONE-Ha TONE-La OUTW OUTa AGC1 AUX0 AUX1 PORT0 PORT1 ADR SDA SCL GND INb LF1 LF2 LF3 TONE-Hb TONE-Lb OUTb AGC2 CVA CVB CVW CTH CTL CSR Vref V+ 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Symbol INa SR-FIL SS-FIL TONE-Ha TONE-La OUTw OUTa AGC1 AUX0
()
Function Ach input terminal Surround filter terminal Simulated stereo filter terminal Ach tone control (treble) filter terminal Ach tone control (bass) filter terminal Subwoofer output terminal Ach output terminal AGC attack and recovery time setting terminal Auxiliary 3 values voltage output terminal (0.0V, 2.5V, 5V) Auxiliary 2 values voltage output terminal (0.0V, V+) Logic input terminal Logic input terminal Slave address setting terminal I2C data terminal I2C cock terminal Ground terminal
()
No. 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Symbol V+ Vref CSR CTL CTH CVW CVB CVA AGC2 OUTb TONE-Lb TONE-Hb LF3 LF2 LF1 INb
Function Supply voltage terminal Reference voltage terminal DAC output terminal for surround control DAC output terminal for tone control (bass) DAC output terminal for tone control (treble) Bch DAC output terminal for LPF trimmer Bch DAC output terminal for volume and balance Ach DAC output terminal for volume and balance AGC boost level setting terminal Bch output terminal Bch tone control (bass) filter terminal Bch tone control (treble) filter terminal LPF filter3 terminal LPF filter2 terminal LPF filter1 terminal Bch input terminal
AUX1 PORT0 PORT1 ADR SDA SCL GND
The AUX0 terminal should be connected via the protection resistance to 5V device.
(2/24)
NJW1136
I ABSOLUTE MAXIMUM RATING (Ta=25C) PARAMETER Supply Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL V
+
RATING 15 700 -20 to +75 -40 to +125
UNIT V mW C C
PD Topr Tstg
I ELECTRICAL CHARACTERISTICS ( Ta=25C, V+=9V, Rg=600, RL=47k, Vin=100mVrms/1kHz unless otherwise specified) Condition PARAMETER SYMBOL Input Output INa INb Operating Voltage Supply Current1 Supply Current2 Reference Voltage Maximum Input Voltage1 Maximum Input Voltage2 Maximum Output Voltage1 Maximum Output Voltage2 Channel Balance Balance Boost A Balance Cut A Balance Boost B Balance Cut B Trimmer Boost Trimmer Cut Total Harmonic Distortion Maximum Gain Minimum Gain Channel Separation Output Noise 1 Output Noise 2 V
+
MIN. 8.0 4.0 2.8 -1.5 -2.0 -2.0 16.0 -49.0 -2.0 -
TYP. 9.0 13 4.5 3.0 4.0 2.5 3.5 0.0 0.0 0.0 18.0 -44.0 0.0 -90 (31.6) -106 (5.0)
MAX. 13.0 25 5.0 1.5 2.0 -70 2.0 -70 20.0 -39.0 0.5 2.0 -70 -70 -85 (56.2) -96 (15.8)
UNIT V mA V Vrms Vrms Vrms Vrms dB dB dB dB dB dB dB % dB dB dB dBV (Vrms) dBV (Vrms)
ICC1 ICC2 VREF VIM1 VIM2 VOM1 VOM2 GCB BABST BACUT BBBST BBCUT TRBST TRCUT THD GVMAX GVMIN CS VNO1 VNO2
No Signal No Signal, V+=12V No Signal VOL=-20dB,THD=1% VOL=-20dB,THD=1% V+=12V VOL=0dB, THD=1% VOL=0dB, THD=1% V+=12V VOL=0dB CHS="0",BAL="111111" CHS="1", BAL="111111" Vin = 1Vrms CHS="1",BAL="111111" CHS="0", BAL="111111" Vin = 1Vrms VOL=0dB TRIM = +18dB VOL=0dB TRIM = -44dB Vo=0.5Vrms, BW=400Hz to 30kHz VOL=0dB VOL=MUTE Vin=1Vrms Vin=1Vrms BW=400Hz to 30kHz VOL=0dB BW=400Hz to 30kHz VOL=MUTE BW=400Hz to 30kHz
Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin -
Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin -
OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTa OUTb OUTb OUTw OUTw OUTa OUTb OUTa OUTb OUTa OUTb OUTb OUTa -
BW : Band Width
(3/24)
NJW1136
I ELECTRICAL CHARACTERISTICS
(Ta=25C, V+=9V, Rg=600, RL=47k, Vin=100mVrms/1kHz unless otherwise specified) Condition PARAMETER SYMBOL Input Output INa INb HFBST HFFLT HFCUT LFBST LFFLT LFCUT BCT="1" TREB=+15dB, f=10kHz TREB=0, f=10kHz BCT="0" TREB=-15dB, f=10kHz BCB="1" BASS=+15dB, f=100Hz BASS=0, f=100Hz BCB="0" BASS=-15dB, f=100Hz Vin=50mVrms, f=1kHz AGC="1" Vin=100mVrms,f=1kHz AGC="1", AGCL="00" Vin=200mVrms, f=1kHz AGC="1", AGCL="01" Vin=300mVrms, f=1kHz AGC="1", AGCL="10" Vin=400mVrms, f=1kHz AGC="1", AGCL="11" Vin=2Vrms, f=1kHz AGC="1" f=100Hz Surround Effect1 f=100Hz Surround Effect1 f=100 Hz Surround Effect2 f=100Hz Surround Effect2 f=1kHz, Simulated Stereo f=1kHz, Simulated Stereo Input : High Input : Low Logic Output : High Logic Output : Mid Logic Output : Low Logic Output : High Logic Output : Low Input : High Input : Low Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTb OUTa OUTa OUTb OUTb OUTa OUTa OUTb -
MIN.
TYP.
MAX.
UNIT
TONE
High Frequency Boost High Frequency Flat High Frequency Cut Low Frequency Boost Low Frequency Flat Low Frequency Cut 12.5 -2.0 -17.5 12.5 -2.0 -17.5 15.0 0.0 -15.0 15.0 0.0 -15.0 17.5 2.0 -12.5 17.5 2.0 -12.5 dB dB dB dB dB dB
NAGC AGC Boost AGC Flat1 AGC Flat2 AGC Flat3 AGC Flat4 AGC Cut NSURROUND
Surround Gain1 Surround Gain2 Surround Gain3 Surround Gain4 Simulated Stereo1 Simulated Stereo2 SRGAIN1 SRGAIN2 SRGAIN3 SRGAIN 4 SRSIM1 SRSIM2 VPTIN VAUX0 VAUX1 VADR Vin Vin Vin Vin Vin Vin 6.3 2.1 10.7 8.4 1.0 1.0 3.5 4.5 2.0 0 3.5 0 3.5 8.3 4.1 12.7 10.4 3.0 3.0 10.3 6.1 14.7 12.4 5.0 5.0 1.0 5.5 3.0 0.5 V+ 0.5 1.0 dB dB dB dB dB dB V V V V AGCBST AGCFLT1 AGCFLT2 AGCFLT3 AGCFLT4 AGCCUT Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin 1.5 -2.5 -2.5 -2.5 -2.5 -14 3.5 0.0 0.0 0.0 0.0 -10 5.5 2.5 2.5 2.5 2.5 -6.0 dB dB dB dB dB dB
NPORT, AUX
PORT0,1 Input Voltage AUX0 Output Voltage AUX1 Output Voltage ADR Input Voltage
(4/24)
NJW1136
I I C BUS BLOCK CHARACTERISTICS (SDA,SCL)
PARAMETER High Level Input Voltage Low Level Input Voltage High Level Input Current Low Level Input Current Low Level Output Voltage (3mA at SDA pin) Maximum Output Current Maximum Clock Frequency Data Change Minimum Waiting Time Data Transfer Start Minimum Waiting Time Low Level Clock Pulse Width High Level Clock Pulse Width Minimum Start Preparation Waiting Time Minimum Data Hold Time Minimum Data Preparation Time Rise Time Fall Time Minimum Stop Preparation Waiting Time SYMBOL VIH VIL IIH IIL VOL IOL fSCL tBUF tHD:STA tLOW THIGH tSU:STA tHD:DAT tSU:DAT tR tF tSU:STO MIN. 3.0 0 0 -3.0 0 4.7 4.0 4.7 4.0 4.7 5.0 250 4.7 TYP. MAX. 5.0 1.5 10 10 0.4 100 1.0 300 UNIT V V A A V mA kHz
2
s s s s s s ns s ns s
I C BUS Load Condition:
2
Pull up resistance 4k (Connected to +5V) Load capacitance 200pF (Connected to GND)
SDA
tBU
tR
tF
tHD:ST
SCL
tHD:ST P S
tLOW
tHD:DA
tHIGH
tSU:DA Sr
tSU:ST
tSU:ST P
(5/24)
NJW1136
TERMINAL DESCRIPTION No. SYMBOL FUNCTION EQUIVALENT CIRCUIT
V+
VOLTAGE
1,32 pin
1 32
INa INb
Ach input terminal Bch input terminal
20k
V+/2
80k
Vref
6 7 26
OUTw OUTa OUTb
Subwoofer output terminal Ach output terminal Bch output terminal
100 FB
6, 7, 26pin
V+/2
1.8k
2pin
2
SRFIL
Surround filter terminal
FB
V+/2
5.3k
3pin
3
SSFIL
Simulated stereo filter terminal
FB
V+/2
4 28
TONE-Ha TONE-Hb
Treble(tone control) filter terminal
FB
18k
4, 28pin
V+/2
(6/24)
NJW1136
TERMINAL DESCRIPTION No. SYMBOL FUNCTION EQUIVALENT CIRCUIT VOLTAGE
5 27
TONE-La TONE-Lb
12k
5, 27pin
Bass(tone control) filter terminal
FB
12k
V+/2
8
AGC1
Capacitor connection terminal for AGC attack and recovery time setting
8pin 400 12k 400
1.4V
1k 9pin
9
AUX0
Auxiliary 3 values voltage output terminal
FB
0V, 2.5V, 5.0V
10
AUX1
Auxiliary 2 values voltage output terminal (Open collector type output) 12k
10pin
0V 3.5 to V+
5V
11 12 13
PORT0 PORT1 ADR
Logic input terminal Logic input terminal Slave address setting terminal
(Don't apply over 5V to these terminals)
11, 12, 13pin
560
-
(7/24)
NJW1136
TERMINAL DESCRIPTION No. SYMBOL FUNCTION EQUIVALENT CIRCUIT VOLTAGE
14pin
4k
14
SDA
I C data terminal
8k
2
-
4k
15
SCL
I C clock terminal
2
15pin
-
8k
16 17
GND V+
Ground terminal Supply voltage terminal
-
V+/2
18pin
200k
18
Vref
Reference voltage terminal
200k
V+/2
19pin
19
CSR
DAC output for surround control terminal
0V
32k
(8/24)
NJW1136
TERMINAL DESCRIPTION No. SYMBOL FUNCTION EQUIVALENT CIRCUIT VOLTAGE
20 21
CTL CTH
DAC output for tone control terminal
20, 21pin
36k
V+/2
22 23 24
CVW CVB CVA
DAC output terminal for trimmer control DAC output terminal for Bch volume control DAC output terminal for Ach volume control
22, 23, 24pin
8k
V+/2
25
AGC2
Resistance connection terminal for AGC boost level setting
25pin
0V
29 30
LF3 LF2
LPF filter terminal
29, 30pin
V+/2+0.7V
31
LF1
LPF filter terminal
4k
24k
FB
V+/2
(9/24)
NJW1136
I MEASUREMENT CIRCUIT
Input Ach 0.47 0.47 Input Bch
1
100n
INa SR-FIL SS-FIL
INb LF1 LF2 LF3 TONE-Hb TONE-Lb OUTb AGC2 CVA CVB CVW CTH CTL CSR Vref V+
32
0.033
Vin
100n
2 3
2.2n
31
0.047
Vin
30
0.022
4 TONE -Ha
100n
29
2.2n
5 TONE -La
Output Wch 4.7
28
100n
6
Output Ach 4.7
OUTw OUTa AGC1 AUX0 AUX1 PORT0 PORT1 ADR SDA SCL GND
27
4.7 Output Bch
7
47k AUX0 47k 330nF
26
100k
8 9
25
4.7
47k
24
4.7
AUX1
10
(2)
23
4.7
(1)
PORT0
11 12
22
4.7
21
4.7
VPTIN0
PORT1
13
VPTIN1 VADRIN
20
4.7
ADR
14 15 16
19
4.7
SDA
18 17
22 V+ Icc
Vref
(3)
SCL
V+
(1) VAUX0 Output High Output Low (2) VAUX1 Output Low (3) VOL Output Low IOL -3mA IAUX1 -3mA IAUX0 +2mA -120A
(10/24)
NJW1136
I APPLICATION CIRCUIT
0.47 1 100n 100n 2.2n 100n 4.7 4.7 5V 330nF 4.7k 2 3 4 5 6 7 8 9 10 220 11 220 12
(4)
0.47 INa SR-FIL SS-FIL TONE-Ha TONE-La OUTw OUTa AGC1 AUX0 AUX1 PORT0 PORT1 ADR SDA SCL GND INb LF1 LF2 LF3 TONE-Hb TONE-Lb OUTb AGC2 CVA CVB CVW CTH CTL CSR Vref V+ 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 22 0.033 0.047 0.022 2.2n 100n 4.7 100k 4.7 4.7 4.7 4.7 4.7 4.7 4.7
13 100 14 220 15 16
(4) Set the Slave Address by "ADR" terminal. ADR pin (13pin) GND +5V "ADR" bit 0 1
(11/24)
NJW1136
I LPF Characteristics
R=24k gm1
+ -
gm2
+ -
+ -
LF1 C1
Primary LPF
LF2 C2
Secondary LPF
LF3 C3
LPF Block Diagram The NJW1136 includes the LPF for subwoofer output and bass boost function. The LPF consists of primary and secondary LPF and it is enable to adjust "cut off frequency", "Q" and "Roll off". The expression of LPF characteristics is as follows.
f c1 =
1 1 = 2 * R * C1 2 * 24 *10 -3 * C1
Q1 = 0.5

f c2 =
42.9 10 -6 2 C 2 C 3
Q 2 = 1.46 *
C3 C2

C2 = 47nF, C3 = 22nF
5
C1 = 33nF, C
5
C1 = 33nF, C2 = 47nF
C 2
5
C1=68nF C1=47nF C1=33nF C1=22nF C1=15nF G
C3=47nF C3=33nF C3=22nF C3=15nF C3=10nF
0
0
C2=33nF C2=47nF
0
Gain[dB]
C2=100nF
-10
-10
Gain[dB]
0.1 1
-5
-5
C2=68nF
-5
-10
-15
-15
-15
-20
0.1
1
-20
-20
Frequency [kHz]
Fr
Frequency [kHz]
0.1
1
(12/24)
NJW1136
I DEFINITION OF I C REGISTER 2 I C BUS FORMAT
MSB LSB MSB LSB MSB LSB
2
S
1bit
Slave Address
8bit
A
1bit
Select Address
8bit
A
1bit
Data
8bit
A
1bit
P
1bit
S: Starting Term A: Acknowledge Bit P: Ending Term
SLAVE ADDRESS
R/W ADR
MSB 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ADR 0 1 0 1 N R/W = 0 : Write Mode, ADR = 0/1 0 0 1 1
: Set the Write Mode or Read Mode. : Set the Slave Address by "ADR" terminal. (See Application Circuit)
Slave Address LSB R/W Hex 80(h) 82(h) 81(h) 83(h)
N R/W = 1 : Read Mode, ADR = 0/1
CONTROL REGISTER TABLE
The select address sets each function (Volume, Balance, Bass Boost Select, AGC, Surround, Tone Control, AUX). The auto increment function cycles the select address as follows. 00H01H02H03H04H05H00H Select Address 00H 01H 02H 03H 04H 05H BIT D7 D6 D5 D4 D3 D2 D1 D0 BIT D7 CHS BCB BCT SUR AUX1 TRIM BASS TREB AUX0 AGCL D6 D5 D4 VOL BAL AGC : Don't Care D3 D2 D1 D0 BBSW
1 1 1 1 1 1 PORT1 PORT0 *PORT1, PORT0 terminal setting D1/D0 Remarks 0 D1/D0 output "0" at PORT1/PORT0 terminal receive High signal "1" (more than 3.5V) 1 D1/D0 output "1" at PORT1/PORT0 terminal receive Low signal "0" (less than 1.0V) CONTROL REGISTER DEFAULT VALUE Control register default value is all "0".
Select Address 00H 01H 02H 03H 04H 05H BIT D7 0 0 0 0 0 0 D6 0 0 0 0 0 0 D5 0 0 0 0 0 0 D4 0 0 0 0 0 0 D3 0 0 0 0 0 0 D2 0 0 0 0 0 0 D1 0 0 0 0 0 0 D0 0 0 0 0 0 0
(13/24)
NJW1136
INSTRUCTION CODE a) MASTER VOLUME SETTING
Select Address BIT D7 D6 D5 D4 D3 D2 D1 D0
00H VOL *VOL Attenuation level : 0 to -80dB(0.33dB/step) , MUTE The attenuator is consisted of both the VOL1(0.165dB/step)and VOL2(0.165dB/step) and is enable to adjust 0.33dB/step. The attenuation for both the VOL1and VOL2 are always synchronized to have the same attenuation levels for each other, and are not controllable independently for each other. ex) VOL(-30dB) = VOL1(-15dB) + VOL2(-15dB)
b) BALANCE AND BASS BOOST FUNCTION SETTING
Select Address 01H BIT D7 CHS D6 D5 D4 BAL D3 D2 D1 D0 BBSW
*CHS : Channel select for balance control "0" : Ach "Bch is attenuated" "1" : Bch "Ach is attenuated" *BAL : Balance control for both Ach and Bch Balance Level : 0 to -60dB (1dB/Step) , MUTE *BBSW : Bass Boost ON/OFF Switch "0" = Bass Boost OFF "1" = Bass Boost ON
c) TRIMMER LEVEL SETTING
Select Address BIT D7 D6 D5 D4 D3 D2 D1 D0
Don't Care
02H TRIM *TRIM : Trimmer Level Trimmer Level : +18 to -44dB (0.5dB/Step) , MUTE
d) TONE CONTROL BASS SETTING
Select Address 03H BIT D7 BCB D6 D5 D4 BASS D3 D2 D1
Don't Care
D0
*BCB : Boost cut select for Bass control "0" : Cut "1" : Boost *BASS : BASS Level Setting Cut Level : -15 to 0dB(0.5dB/Step) Boost Level : 0 to +15dB(0.5dB/Step)
d) TONE CONTROL TREBLE SETTING
Select Address 04H BIT D7 BCT D6 D5 D4 TREB D3 D2 D1
Don't Care
D0
*BCT : Boost cut select for Treble control "0" : Cut "1" : Boost *TREB : TREBLE Level Setting Cut Level : -15 to 0dB(0.5dB/Step) Boost Level : 0 to +15dB(0.5dB/Step)
(14/24)
NJW1136
d) SURROUND, AUXILIARY, AGC LEVEL SETTING
Select Address 05H BIT D7 SUR D6 D5 AUX1 D4 AUX0 D3 D2 AGCL D1 D0 AGC

Surround Setting Surround Off Simulated Stereo Surround Effect1 Surround Effect2 D7 0 0 1 1 D6 0 1 0 1 Remarks Surround Off Simulated Stereo Surround Effect Low(8.3dB typ.) Surround Effect High(12.7dB typ.)

Auxiliary Setting Low (0.0V) High (5.0V) D5 0 1

Auxiliary Setting Low (0.0V) Mid (2.5V) High (5.0V) D4 0 1 D3 0 1 1

AGC Level Setting 100mVrms 200mVrms 300mVrms 400mVrms D2 0 0 1 1 D1 0 1 0 1

AGC Setting OFF ON D0 0 1
(15/24)
NJW1136
IMaster Volume (Select Address : 00H)
VOL Gain(dB) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 HEX FF FC F9 F6 F3 F0 ED EA E7 E4 E1 DE DB D8 D5 D2 CF CC C9 C6 C3 C0 BD BA B7 B4 B1 AE AB A8 A5 A2 9F 9C 99 96 93 90 8D 8A 87 84 81 D7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 D4 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 D3 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 D2 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 D1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
(16/24)
NJW1136
VOL Gain(dB) -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79 -80 MUTE HEX 7E 7B 78 75 72 6F 6C 69 66 63 60 5D 5A 57 54 51 4E 4B 48 45 42 3F 3C 39 36 33 30 2D 2A 27 24 21 1E 1B 18 15 12 0F 00 D7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 D4 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 D3 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 0 D2 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 0 D1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 D0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
: Default Value
(17/24)
NJW1136
IBalance, Bass Boost Setting (Select Address : 01H)
Channel Setting (CHS) Decrease Bch Gain Decrease Ach Gain Gain(dB) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 D7 0 1 BAL D6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D4 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 D3 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 D2 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 D1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 : Default Value
(18/24)
NJW1136
Gain(dB) -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 MUTE BAL D6 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D5 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D4 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 D3 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 D2 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 D1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
Bass Boost Setting (BBSW) Bass Boost Off Bass Boost On
D0 0 1 : Default Value
(19/24)
NJW1136
ITrimmer Setting (Select Address: 02H)
TRIM Gain(dB) +18.0 +17.5 +17.0 +16.5 +16.0 +15.5 +15.0 +14.5 +14.0 +13.5 +13.0 +12.5 +12.0 +11.5 +11.0 +10.5 +10.0 +9.5 +9.0 +8.5 +8.0 +7.5 +7.0 +6.5 +6.0 +5.5 +5.0 +4.5 +4.0 +3.5 +3.0 +2.5 +2.0 +1.5 +1.0 +0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0 D7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 D4 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 D3 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 D2 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 D1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
(20/24)
NJW1136
TRIM Gain(dB) -6.5 -7.0 -7.5 -8.0 -8.5 -9.0 -9.5 -10.0 -10.5 -11.0 -11.5 -12.0 -12.5 -13.0 -13.5 -14.0 -14.5 -15.0 -15.5 -16.0 -16.5 -17.0 -17.5 -18.0 -18.5 -19.0 -19.5 -20.0 -20.5 -21.0 -21.5 -22.0 -22.5 -23.0 -23.5 -24.0 -24.5 -25.0 -25.5 -26.0 -26.5 -27.0 -27.5 -28.0 -28.5 -29.0 -29.5 -30.0 -30.5 -31.0 D7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 D5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 D4 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 D3 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 D2 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 D1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
(21/24)
NJW1136
TRIM Gain B -31.5 -32.0 -32.5 -33.0 -33.5 -34.0 -34.5 -35.0 -35.5 -36.0 -36.5 -37.0 -37.5 -38.0 -38.5 -39.0 -39.5 -40.0 -40.5 -41.0 -41.5 -42.0 -42.5 -43.0 -43.5 -44.0 MUTE D7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D4 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 D3 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 D2 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 D1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
: Default value
(22/24)
NJW1136
ITone Control(Bass Setting) (Select Address : 03H)
Bass Cut or Boost Cut Boost BCB D7 0 1 BASS Cut Gain(dB) -15.0 -14.5 -14.0 -13.5 -13.0 -12.5 -12.0 -11.5 -11.0 -10.5 -10.0 -9.5 -9.0 -8.5 -8.0 -7.5 -7.0 -6.5 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 Boost Gain(dB) 15.0 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D4 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D3 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 : Default value
(23/24)
NJW1136
ITone Control(Treble Setting) (Select Address : 04H)
Treble Cut or Boost Cut Boost BCT D7 0 1 TREB Cut Gain(dB) -15.0 -14.5 -14.0 -13.5 -13.0 -12.5 -12.0 -11.5 -11.0 -10.5 -10.0 -9.5 -9.0 -8.5 -8.0 -7.5 -7.0 -6.5 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 Boost Gain(dB) 15.0 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D4 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D3 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 : Default value
INOTE 2 Purchase of I C components of New Japan Radio Co., Ltd or one of its sublicensed Associated Companies 2 2 conveys a license under the Philips I C Patent Rights to use these components in an I C system, provided that 2 the system conforms to the I C Standard Specification as defined by Philips.
[CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
(24/24)

▲Up To Search▲

Price & Availability of NJW1136

All Rights Reserved © IC-ON-LINE 2003 - 2022

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]

Mirror Sites : [www.datasheet.hk] [www.maxim4u.com] [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com] [www.gdcy.net]

. . . . .

We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy.

X