 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v02.1202 HMC362S8G SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 12.0 GHz Features Ultra Low SSB Phase Noise: -149 dBc/Hz Wide Bandwidth Output Power: -6 dBm Single DC Supply: +5V S8G SMT Package Typical Applications Prescaler for DC to X Band PLL Applications: * Satellite Communication Systems * Fiber Optic 10 FREQ. DIVIDER & DETECTORS - SMT * Pt-Pt and Pt-MPt Radios * VSAT Functional Diagram General Description The HMC362S8G is a low noise Divide-by-4 Static Divider with InGaP GaAs HBT technology in an 8 lead surface mount plastic package. This device operates from DC (with a square wave input) to 12 GHz input frequency with a single +5.0V DC supply. The low additive SSB phase noise of -149 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. Electrical Specifications, TA = +25 C, 50 Ohm System, Vcc = 5V Parameter Maximum Input Frequency Minimum Input Frequency Input Power Range Sine Wave Input. [1] Fin = 1 to 8 GHz Fin = 8 to 10 GHz Fin = 10 to 12 GHz Ouput Power Reverse Leakage SSB Phase Noise (100 kHz offset) Output Transition Time Supply Current (Icc) Fin = 11 GHz Both RF Outputs Terminated Pin = 0dBm, Fin = 6 GHz Pin = 0 dBm, Fout = 882 MHz -15 -10 -5 -9 Conditions Min. 12 Typ. 13 0.2 >-20 >-15 >-8 -6 60 -149 100 68 0.5 +10 +3 0 Max. Units GHz GHz dBm dBm dBm dBm dB dBc/Hz ps mA 1. Divider will operate down to DC for square-wave input signal. 10 - 14 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v02.1202 HMC362S8G SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 12.0 GHz GaAs MMIC SUB-HARMONICALLY Input Sensitivity Window17 Temperature PUMPED MIXER vs. - 25 GHz Input Sensitivity Window, T= 25 C 20 20 10 10 INPUT POWER (dBm) 0 INPUT POWER (dBm) Recommended Operating Window 0 -10 -10 Min Pin +25 C Max Pin +25 C Min Pin +85 C Max Pin +85 C Min Pin -40 C Max Pin -40 C 10 9 10 11 12 13 14 -20 -20 -30 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 INPUT FREQUENCY (GHz) -30 0 1 2 3 4 5 6 7 8 INPUT FREQUENCY (GHz) Output Power vs. Temperature 0 -1 +25 C +85 C -40 C SSB Phase Noise Performance, Pin= 0 dBm, T= 25 C 0 -20 OUTPUT POWER (dBm) -2 -3 -4 -5 -6 -7 -8 -9 -10 0 1 2 3 4 5 6 7 8 9 -40 -60 -80 -100 -120 -140 -160 2 10 10 11 12 13 14 10 3 10 4 10 5 10 6 10 7 INPUT FREQUENCY (GHz) OFFSET FREQUENCY (Hz) Output Harmonic Content, Pin= 0 dBm, T= 25 C 0 Pfeedthru 2nd Harmonic 3rd Harmonic Reverse Leakage, Pin= 0 dBm, T= 25 C 0 -10 Both Output Ports Terminated One Output Port Terminated -10 OUTPUT LEVEL (dBm) POWER LEVEL (dBm) -20 -30 -40 -50 -60 -70 -20 -30 -40 -50 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 INPUT FREQUENCY (GHz) -80 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 INPUT FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 10 - 15 FREQ. DIVIDERS & DETECTORS - SMT SSB PHASE NOISE (dBc/Hz) MICROWAVE CORPORATION v02.1202 HMC362S8G SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 12.0 GHz Output Voltage Waveform, Pin= 0 dBm, Fout= 882 MHz, T= 25 C 300 200 Absolute Maximum Ratings RF Input (Vcc = +5V) Vcc VLogic Storage Temperature Operating Temperature +13 dBm +5.5V Vcc -1.6V to Vcc -1.2V -65 to +150 C -40 to +85 C AMPLITUDE (mV) 100 0 -100 -200 -300 22.7 22.9 23.1 23.3 23.5 23.7 23.9 24.1 24.3 24.5 24.7 TIME (nS) 10 FREQ. DIVIDER & DETECTORS - SMT Typical Supply Current vs. Vcc Vcc (V) 4.75 5.0 5.25 Icc (mA) 61 68 74 Note: Divider will operate over full voltage range shown above Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 10 - 16 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v02.1202 HMC362S8G SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 12.0 GHz Pin Description Pin Number Function Description Interface Schematic 1 OUT Divided output 180 out of phase with pin 3. 10 FREQ. DIVIDERS & DETECTORS - SMT 10 - 17 2, 6 N/C No connection. These pins must not be grounded. 3 OUT Divided Output. 4 VCC Supply voltage 5V 0.25V. 5 IN RF Input must be DC blocked. 7 IN RF Input 180 out of phase with pin 5 for differential operation. A/C ground for single ended operation 8 GND Ground Backside of package has exposed metal ground slug which must be connected to ground. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v02.1202 HMC362S8G SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 12.0 GHz Evaluation PCB 10 FREQ. DIVIDER & DETECTORS - SMT List of Materials Item J1 - J3 C1 - C4 C5 C6 U1 PCB* Description PC Mount SMA RF Connector 100 pF Capacitor, 0402 Pkg. 1000 pF Capacitor, 0603 Pkg. 10 F Tantalum Capacitor HMC362S8G Divide-by-4 104627 Eval Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2 and J3 provide differential output signals. * Circuit Board Material: Rogers 4350 10 - 18 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v02.1202 HMC362S8G SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 12.0 GHz Application Circuit 10 FREQ. DIVIDERS & DETECTORS - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 10 - 19 |
Price & Availability of HMC362S8G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |