 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 800-227-4856 FAX 800-227-4866 R PolySwitch(R) PTC Devices Overcurrent Protection Device PRODUCT: SMD200 DOCUMENT: SCD 22294 PCN: 925851 REV LETTER: H REV DATE: JULY 11, 1998 PAGE NO.: 1 OF 2 Specification Status: Released Maximum Electrical Ratings Operating Voltage / Interrupt Current C 15V / 40A 12V / 60A 5V / 125A H Marking: B G D A E F 200 Manufacturer's Mark Part Identification Notes: 1. All metal surfaces are tin plated. 2. Devices cannot be wave soldered. 3. Drawing not to scale. TABLE I. DIMENSIONS: A B C D E F G H MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN mm: 8.00 9.40 -3.00 5.99 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43 in*: (0.315) (0.370) -(0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) *Rounded off approximation TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT RATINGS REFERENCE ONE-HOUR TRIPPED-STATE RESISTANCE POST SOLDER POWER VALUES RESISTANCE DISSIPATION (PRE REFLOW) (260C, 20 SEC) AMPS SECONDS AT OHMS OHMS WATTS AT AT 60C 20C, 8.0A AT 20C AT 20C 20C HOLD TRIP MAX MIN MAX MAX MAX 1.3 2.8 12 0.050 0.070 0.125 1.9 TIME TO TRIP AMPS 20C HOLD 2.0 AMPS AT 0C HOLD TRIP 2.3 4.6 AMPS AT 20C HOLD TRIP 2.0 4.0 Reference Documents: Precedence: Effectivity: CAUTION: PS300, E.N. SMD 1.0x This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. www..com Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. www..com www..com Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 800-227-4856 FAX 800-227-4866 R PolySwitch(R) PTC Devices Overcurrent Protection Device PRODUCT: SMD200 DOCUMENT: SCD 22294 PCN: 925851 REV LETTER: H REV DATE: JULY 11, 1998 PAGE NO.: 2 OF 2 TEST PROCEDURES AND REQUIREMENTS FOR SMD200 TEST NAME Visual Mechanical Resistance Hold Current Time to Trip PS300 SECTION 5.1.1 5.4.1 5.4.6 5.4.7 TEST CONDITIONS Verify dimensions and materials Condition D, 20C 30 minutes, 2.00A 8 amps, 20C ACCEPT/REJECT CRITERIA Per SCD physical description Per SCD No Trip Trip Time < 12 sec |
Price & Availability of SMD200
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |