 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DS52-0005 Low Cost Two-Way SMT Power Divider 1700 - 1900 MHz Features * * * * * * * Small Size and Low Profile Industry Standard SOIC-8 SMT Plastic Package Superior Repeatability Excellent Amplitude Balance: 0.05 dB Typical Excellent Insertion Loss: 0.3 dB Typical Low Cost DCS-1800 Frequency Coverage SOIC-8 Description M/A-COM's DS52-0005 is an IC-based monolithic power divider in a low cost SOIC-8 plastic package. This 2-way power splitter is ideally suited for applications where small size, low profile and low cost, without sacrificing performance are required. Typical applications include base station , portables and PCMCIA cards for DCS-1800 European applications. Available in tape and reel. The DS52-0005 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Ordering Information Part Number DS52-0005 DS52-0005-TR DS52-0005-RTR Package SOIC-8 Lead Plastic Package Forward Tape and Reel1 Reverse Tape and Reel1 1. If specific reel size is required, consult factory for part number assignment. Typical Electrical Specifications1, TA = +25C Parameter Insertion Loss Isolation VSWR Amplitude Balance Phase Balance Above 3.0dB Units dB dB -- dB Min -- 15 -- -- -- Typ 0.3 20 1.3:1 0.1 2 Max 0.5 -- 1.5:1 0.15 4 1. All specifications apply with a 50-Ohm source and load impedance. Specifications subject to change without notice. n North America: Tel. (800) 366-2266, Fax (800) 618-8883 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 3.0 1 Low Cost Two-Way SMT Power Divider, 1700-1900 MHz Absolute Maximum Ratings1 Parameter Input Power Operating Temperature Storage Temperature Absolute Maximum 1 W CW -40C to +85C -65C to +150C DS52-0005 Functional Diagram 1. Exceeding these limits may cause permanent damage. 2. With Internal load dissipation of 0.125 W maximum. Recommended PCB Configuration (Dimensions in Inches) Typical Performance @ +25C Insertions Loss vs. Frequency 0 -14 -16 Isolation vs. Frequency INSERTION LOSS (dB) ISOLATION (dB) -0.5 -18 -20 -22 -24 -1 -1.5 2200 2275 2350 2425 2500 -26 2200 2275 2350 2425 2500 FREQUENCY(MHz) FREQUENCY (MHz) VSWR vs. Frequency 2 1.9 1.8 Phase Balance vs. Frequency Relative to RF1 0 VSWR (Ratio) 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 2200 2275 2350 2425 2500 PHASE, DEGREES -1 -2 -3 2200 2275 2350 2425 2500 FREQUENCY (dB) FREQUENCY (MHz) V 3.0 Specifications subject to change without notice. n North America: Tel. (800) 366-2266, Fax (800) 618-8883 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. 2 |
Price & Availability of DS52-0005-TR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |