|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PEDD514260ESL-01 This version : Jan. 2001 Semiconductor MSM514260E/ESL 262,144-Word x 16-Bit DYNAMIC RAM : FAST PAGE MODE TYPE Preliminary DESCRIPTION The MSM514260E/ESL is a 262,144-word x 16-bit dynamic RAM fabricated in Oki's silicon-gate CMOS technology. The MSM514260E/ESL achieves high integration, high-speed operation, and low-power consumption because Oki manufactures the device in a quadruple-layer polysilicon/double-layer metal CMOS process. The MSM514260E/ESL is available in a 40-pin plastic SOJ, 44/40-pin plastic TSOP. The MSM514260ESL (the Self-refresh version) is specially designed for lower-power applications. FEATURES * * * * * * 262,144-word x 16-bit configuration Single 5V power supply, 10% tolerance Input Output Refresh : TTL compatible, low input capacitance : TTL compatible, 3-state : 512 cycles/8 ms, 512 cycles/128 ms (SL version) Fast page mode, read modify write capability * * * CAS before RAS refresh, hidden refresh, RAS-only refresh capability CAS before RAS self-refresh capability (SL version) Package options: 40-pin 400mil plastic SOJ 44/40-pin 400mil plastic TSOP (SOJ40-P-400-1.27) (TSOPII44/40-P-400-0.80-K) (Product : MSM514260E/ESL-xxJS) (Product : MSM514260E/ESL-xxTS-K) xx : indicates speed rank. PRODUCT FAMILY Family Access Time (Max.) tRAC 60ns 70ns tAA 30ns 35ns tCAC 15ns 20ns tOEA 15ns 20ns Cycle Time (Min.) 110ns 130ns Power Dissipation Operating (Max.) 633mW 578mW Standby (Max.) 5.5mW/ 1.1mW (SL version) MSM514260E/ESL 1/14 PEDD514260ESL-01 MSM514260E/ESL PIN CONFIGRATION (TOP VIEW) VCC 1 DQ1 2 DQ2 3 DQ3 4 DQ4 5 VCC 6 DQ5 7 DQ6 8 DQ7 9 DQ8 10 NC 11 NC 12 WE 13 RAS 14 NC 15 A0 16 A1 17 A2 18 A3 19 VCC 20 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 VSS DQ16 DQ15 DQ14 DQ13 VSS DQ12 DQ11 DQ10 DQ9 NC LCAS UCAS OE A8 A7 A6 A5 A4 VSS VCC 1 DQ1 2 DQ2 3 DQ3 4 DQ4 5 VCC 6 DQ5 7 DQ6 8 DQ7 9 DQ8 10 NC 13 NC 14 WE 15 RAS 16 NC 17 A0 18 A1 19 A2 20 A3 21 VCC 22 44 43 42 41 40 39 38 37 36 35 32 31 30 29 28 27 26 25 24 23 VSS DQ16 DQ15 DQ14 DQ13 VSS DQ12 DQ11 DQ10 DQ9 NC LCAS UCAS OE A8 A7 A6 A5 A4 VSS 40-Pin Plastic SOJ 44/40-Pin Plastic TSOP (K Type) Pin Name A0 - A8 RAS LCAS UCAS DQ1 - DQ16 OE WE VCC VSS NC Function Address Input Row Address Strobe Lower Byte Column Address Strobe Upper Byte Column Address Strobe Data Input/Data Output Output Enable Write Enable Power Supply (5V) Ground (0V) No Connection Note : The same power supply voltage must be provided to every VCC pin, and the same GND voltage level must be provided to every VSS pin. 2/14 PEDD514260ESL-01 MSM514260E/ESL BLOCK DIAGRAM WE RAS LCAS UCAS Column Address Buffers Internal Address Counter Row Address Buffers Timing Generator I/O Controller I/O Controller 9 9 Column Decoders 8 Output Buffers 8 OE DQ1 - DQ8 8 I/O Selector Input Buffers 8 A0 - A8 Refresh Control Clock Sense Amplifiers 16 16 Input Buffers 8 9 9 Row Decoders Word Drivers Memory Cells 8 8 DQ9 - DQ16 Output Buffers 8 VCC On Chip VBB Generator VSS FUNCTION TABLE Input Pin RAS H L L L L L L L L LCAS * H L H L L H L L UCAS * H H L L H L L L WE * * H H H L L L H OE * * L L L H H H H DQ Pin DQ1-DQ8 High-Z High-Z DOUT High-Z DOUT DIN Don't Care DIN High-Z DQ9-DQ16 High-Z High-Z High-Z DOUT DOUT Don't Care DIN DIN High-Z Function Mode Standby Refresh Lower Byte Read Upper Byte Read Word Read Lower Byte Write Upper Byte Write Word Write * : "H" or "L" 3/14 PEDD514260ESL-01 MSM514260E/ESL ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Parameter Voltage on Any Pin Relative to VSS Voltage VCC supply Relative to VSS Short Circuit Output Current Power Dissipation Operating Temperature Storage Temperature Symbol VIN, VOUT VCC IOS PD* Topr Tstg Rating -0.5 to VCC + 0.5 -0.5 to 7.0 50 1 0 to 70 -55 to 150 Unit V V mA W C C *: Ta = 25C Recommended Operating Conditions (Ta = 0C to 70C) Parameter Power Supply Voltage Input High Voltage Input Low Voltage Symbol Min. 4.5 0 2.4 -0.5 *2 Typ. 5.0 0 Max. 5.5 0 Unit V V V V VCC VSS VIH VIL VCC + 0.5*1 0.8 Notes: *1. The input voltage is VCC + 2.0V when the pulse width is less than 20ns (the pulse width is with respect to the point at which VCC is applied). *2. The input voltage is VSS - 2.0V when the pulse width is less than 20ns (the pulse width respect to the point at which VSS is applied). Capacitance (VCC = 5V 10%, Ta = 25C, f=1MHz) Parameter Input Capacitance (A0 - A8) Input Capacitance (RAS, LCAS, UCAS, WE, OE) Output Capacitance (DQ1 - DQ16) Symbol Typ. Max. 5 7 7 Unit pF pF pF CIN1 CIN2 CI/O 4/14 PEDD514260ESL-01 MSM514260E/ESL DC Characteristics (VCC = 5V 10%, Ta = 0C to 70C) MSM514260 E/ESL-60 Min. Output High Voltage Output Low Voltage Input Leakage Current VOH VOL ILI IOH = -5.0mA IOL = 4.2mA 0V VI VCC+0.5V; All other pins not under test = 0V DQ disable 0V VO VCC RAS, CAS cycling, tRC = Min. RAS, CAS = VIH Power Supply Current (Standby) ICC2 RAS, CAS VCC - 0.2V RAS cycling, CAS = VIH, tRC = Min. RAS = VIH, CAS = VIL, DQ = enable RAS = cycling, CAS before RAS RAS = VIL, CAS cycling, tPC = Min. tRC = 125s CAS before RAS tRAS = 1s RAS 0.2V, CAS 0.2V, 2.4 0 -10 Max VCC 0.4 10 MSM514260 E/ESL-70 Min. 2.4 0 -10 Max VCC 0.4 10 V V A Parameter Symbol Condition Unit Note Output Leakage Current Average Power Supply Current (Operating) ILO -10 10 -10 10 A ICC1 115 2 1 200 115 105 2 mA 1,2 mA 1 200 105 A mA 1 1,5 1,2 Average Power Supply Current (RAS-only Refresh) Power Supply Current (Standby) Average Power Supply Current (CAS before RAS Refresh) Average Power Supply Current (Fast Page Mode) Average Power Supply Current (Battery Backup) Average Power Supply Current (CAS before RAS Self-Refresh) ICC3 ICC5 5 5 mA 1 ICC6 115 105 mA 1,2 ICC7 115 105 mA 1,3 ICC10 300 300 A 1,4, 5 ICCS 300 300 A 1,5 Notes: 1. 2. 3. 4. 5. ICC Max. is specified as ICC for output open condition. The address can be changed once or less while RAS = VIL. The address can be changed once or less while CAS = VIH. VCC - 0.2V VIH VCC + 0.5V, - 0.5V VIL 0.2V. SL version. 5/14 PEDD514260ESL-01 MSM514260E/ESL AC Characteristic (1/2) (VCC = 5V 10%, Ta = 0C to 70C) Note1,2,3 MSM514260 E/ESL-60 Min. Random Read or Write Cycle Time Read Modify Write Cycle Time Fast Page Mode Cycle Time Fast Page Mode Read Modify Write Cycle Time Access Time from RAS Access Time from CAS Access Time from Column Address Access Time from CAS Precharge Access Time from OE Output Low Impedance Time from CAS CAS to Data Output Buffer Turn-off Delay Time OE to Data Output Buffer Turn-off Delay Time Transition Time Refresh Period Refresh Period (SL version) RAS Precharge Time RAS Pulse Width RAS Pulse Width (Fast Page Mode) RAS Hold Time RAS Hold Time referenced to OE CAS Precharge Time (Fast Page Mode) CAS Pulse Width CAS Hold Time CAS to RAS Precharge Time RAS Hold Time from CAS Precharge RAS to CAS Delay Time RAS to Column Address Delay Time Row Address Set-up Time Row Address Hold Time Column Address Set-up Time Column Address Hold Time tRC tRWC tPC tPRWC tRAC tCAC tAA tCPA tOEA tCLZ tOFF tOEZ tT tREF tREF tRP tRAS tRASP tRSH tROH tCP tCAS tCSH tCRP tRHCP tRCD tRAD tASR tRAH tASC tCAH 110 155 40 85 0 0 0 3 40 60 60 15 15 10 15 60 5 35 20 15 0 10 0 10 Max. 60 15 30 35 15 15 15 50 8 128 10,000 100,000 10,000 45 30 MSM514260 E/ESL-70 Min. 130 185 45 100 0 0 0 3 50 70 70 20 20 10 20 70 5 40 20 15 0 10 0 15 Max. 70 20 35 40 20 15 15 50 8 128 10,000 100,000 10,000 50 35 ns ns ns ns ns ns ns ns ns ns ns ns ns ms ms ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 11 11 12 12 5 6 14 15 4,5,6 4,5 4,6 4,12 4 4 7 7 3 Parameter Symbol Unit Note 6/14 PEDD514260ESL-01 MSM514260E/ESL AC Characteristic (2/2) (VCC = 5V 10%, Ta = 0C to 70C) Note1,2,3 MSM514260 E/ESL-60 Min. Column Address to RAS Lead Time Read Command Set-up Time Read Command Hold Time Read Command Hold Time referenced to RAS Write Command Set-up Time Write Command Hold Time Write Command Pulse Width OE Command Hold Time Write Command to RAS Lead Time Write Command to CAS Lead Time Data-in Set-up Time Data-in Hold Time OE to Data-in Delay Time CAS to WE Delay Time Column Address to WE Delay Time RAS to WE Delay Time CAS Precharge WE Delay Time CAS Active Delay Time from RAS Precharge RAS to CAS Set-up Time (CAS before RAS) RAS to CAS Hold Time (CAS before RAS) RAS Pulse Width (CAS before RAS Self-Refresh) RAS Precharge Time (CAS before RAS Self-Refresh) CAS Hold Time (CAS before RAS Self-Refresh) tRAL tRCS tRCH tRRH tWCS tWCH tWP tOEH tRWL tCWL tDS tDH tOED tCWD tAWD tRWD tCPWD tRPC tCSR tCHR tRASS 30 0 0 0 0 10 10 15 15 15 0 10 15 40 55 85 60 5 10 10 100 Max. MSM514260 E/ESL-70 Min. 35 0 0 0 0 15 10 20 20 20 0 15 20 50 65 100 70 5 10 10 100 Max. ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns s 9 9 9 9 11 11 12 15 13 10,11 10,11 11 8,11 8 9,11 11 Parameter Symbol Unit Note tRPS 110 - 40 130 - 50 ns 15 tCHS ns 15 7/14 PEDD514260ESL-01 MSM514260E/ESL Notes: 1. A start-up delay of 200s is required after power-up, followed by a minimum of eight initialization cycles (RAS-only refresh or CAS before RAS refresh) before proper device operation is achieved. The AC characteristics assume tT = 5ns. VIH (Min.) and VIL (Max.) are reference levels for measuring input timing signals. Transition times (tT) are measured between VIH and VIL. This parameter is measured with a load circuit equivalent to 2 TTL load and 100pF. Operation within the tRCD (Max.) limit ensures that tRAC (Max.) can be met. tRCD (Max.) is specified as a reference point only. If tRCD is greater than the specified tRCD (Max.) limit, then the access time is controlled by tCAC. Operation within the tRAD (Max.) limit ensures that tRAC (Max.) can be met. tRAD (Max.) is specified as a reference point only. If tRAD is greater than the specified tRAD (Max.) limit, then the access time is controlled by tAA. tOFF (Max.) and tOEZ (Max.) define the time at which the output achieved the open circuit condition and are not referenced to output voltage levels. tRCH or tRRH must be satisfied for a read cycle. tWCS, tCWD, tRWD, tAWD and tCPWD are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS tWCS (Min.), then the cycle is an early write cycle and the data out will remain open circuit (high impedance) throughout the entire cycle. If tCWD tCWD (Min.), tRWD tRWD(Min.), tAWD tAWD (Min.) and tCPWD tCPWD (Min.), then the cycle is a read modify write cycle and data out will contain data read from the selected cell; if neither of the above sets of conditions is satisfied, then the condition of the data out (at access time) is indeterminate. 2. 3. 4. 5. 6. 7. 8. 9. 10. These parameters are referenced to the UCAS and LCAS, leading edges in an early write cycle, and to the WE leading edge in an OE control write cycle, or a read modify write cycle. 11. These parameters are determined by the falling edge of either UCAS or LCAS, whichever is earlier. 12. These parameters are determined by the rising edge of either UCAS or LCAS, whichever is later. 13. tCWL should be satisfied by both UCAS and LCAS. 14. tCP is determined by the time both UCAS and LCAS are high. 15. Only SL version. 8/14 PEDD514260ESL-01 1Semiconductor Timing Chart * Read Cycle MSM514260E/ESL tRC tRAS tRP tCRP tCSH tRCD tRAD tRAL tASR tRAH tASC Column RAS VIH VIL CAS VIH VIL tRSH tCAS tCRP tCAH Address VIH VIL VIH VIL VIH VIL Row tRCS tAA tROH tOEA tCAC tRAC tRRH tRCH WE OE tOEZ tCLZ Valid Data-out tOFF DQ VOH VOL Open "H" or "L" * Write Cycle (Early Write) RAS VIH VIL tCRP tRCD tRAD tRC tRAS tRP tCSH tRSH tCAS tRAL tCRP CAS VIH VIL tASR tRAH tASC tCAH Column Address VIH VIL Row tCWL tWCS tWP tWCH WE VIH VIL VIH VIL VIH VIL tRWL OE tDS Valid Data-in tDH Open DQ "H" or "L" 9/14 PEDD514260ESL-01 1Semiconductor * Read Modify Write Cycle MSM514260E/ESL tRWC RAS VIH VIL tCRP CAS VIH VIL tASR Address VIH VIL tRAD tRAH tASC Column tRAS tRP tCSH tRCD tRSH tCAS tCWL tRWL tCRP tCAH Row tRCS tRWD tCWD tWP WE VIH VIL VIH VIL tRAC tCLZ tCAC tOEZ Valid Data-out tAWD tAA tOEA tOED tDS Valid Data-in tOEH OE tD DQ VI/OH VI/OL "H" or "L" 10/14 PEDD514260ESL-01 1Semiconductor * Fast Page Mode Read Cycle MSM514260E/ESL tRASP RAS VIH VIL tCRP CAS VIH VIL tASR Address VIH VIL VIH VIL VIH VIL tRAC tCAC DQ VOH VOL tCLZ tCPA tOFF tOEZ Valid Data-out tRP tPC tRHCP tCP tCAS tRSH tCAS tRAL tASC Column tRCD tCAS tRAD tCSH tRAH tASC tCP tCRP tCAH tASC tCAH tCAH Row Column Column tRCS WE tAA tRCH tAA tOEA tRCS tRCH tAA tRCS tRCH tOEA tCPA tOFF tOEZ Valid Data-out tOEA tRRH OE tCAC tCLZ tCAC tCLZ tOEZ Valid Data-out tOFF "H" or "L" * Fast Page Mode Write Cycle (Early Write) tRASP RAS VIH VIL VIH VIL tASR Address VIH VIL Row tRP tPC tRHPC tCP tCAS tRSH tCAS tRAL tCAH Column tCRP tRCD tCAS tRAD tRAH tASC tCSH tCAH tCP tCRP CAS tASC tCAH tASC Column Column tWCS WE VIH VIL tDS DQ VIH VIL tWCH tWP tCWL tWCS tCWL tWCH tWP tD Valid Data-in tRWL tCWL tWCS tWP tWCH tD Valid Data-in tDS tDS Valid Data-in tD Note: OE = "H" or "L" "H" or "L" 11/14 PEDD514260ESL-01 1Semiconductor * Fast Page Mode Read Modify Write Cycle MSM514260E/ESL tRASP RAS VIH VIL VIH VIL tRAH tASR Address VIH VIL Row tCSH tRCD tRAD tASC Column tPRWC tCAS tCP tCAS tCAH tCAH tCWL tASC tCWL Column Column tRSH tCP tCAS tCAH tASC tCRP tRP CAS tRAL tRCS WE VIH VIL tRAC tAA tPWD tCWD tAWD tWP tDH tDS tOEA tRCS tCPWD tCWD tAWD tCPA tAA tOEA tOED tOEZ Out tCLZ In tCLZ tWP tDS tD tAA tRCS tCPWD tCWD tAWD tROH tCPA tOEA tOED tOEZ Out In tCWL tRWL tWP tD tDS OE VIH VIL tCAC VI/OH VI/OL tCLZ tOED tOEZ Out In tCAC tCAC DQ Note: Out = Valid Data-out, In = Valid Data-in "H" or "L" * RAS-only Refresh Cycle tRC RAS VIH VIL tCRP CAS VIH VIL VIH VIL VOH VOL tASR tRAH tRPC tRAS tRP Address Row tOFF Open Note: WE, OE = "H" or "L" DQ "H" or "L" 12/14 PEDD514260ESL-01 1Semiconductor * CAS before RAS Refresh Cycle MSM514260E/ESL tRP RAS VIH VIL tRPC tCP tCSR tCHR tOFF DQ VOH VOL tRAS tRC tRP tRPC CAS VIH VIL Open Note: WE, OE, Address = "H" or "L" "H" or "L" * Hidden Refresh Read Cycle tRC RAS VIH VIL VIH VIL tASR Address VIH VIL VIH VIL tRAL tAA tROH OE VIH VIL VOH VOL Open tRAS tCRP tRCD tRAD tRAH Row tRC tRAS tRSH tRP tCHR tRP CAS tASC Column tCAH tRCS WE tCAC tRRH tOFF tOEA tRAC tCLZ Valid Data-out "H" or "L" tOEZ DQ 13/14 PEDD514260ESL-01 1Semiconductor Hidden Refresh Write Cycle MSM514260E/ESL tRC RAS VIH VIL VIH VIL tASR Address VIH VIL VIH VIL VIH VIL VIH VIL tDS tD tWP tRAD tRAH Row tRC tRAS tRSH tRP tCHR tRAL tRP tRAS tCRP tRCD CAS tASC Column tCAH tWCS WE tWCH OE DQ Valid Data-in "H" or "L" CAS before RAS Self-Refresh Cycle tRP RAS VIH VIL VIH VIL tOFF DQ VOH VOL tRPC tCP CAS tCSR tRASS tRPS tRPC tCHS Open Note: WE, OE, Address = "H" or "L" O S "H" or "L" 14/14 |
Price & Availability of MSM514260E-XXJS |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |