 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Amplifier, Power, 1.3W 11.5--15.0 GHz Features MAAPGM0041 903208 -- Preliminary Information 1.3 Watt Saturated Output Power Level Variable Drain Voltage (4-10V) Operation MSAGTM Process High Performance Ceramic Bolt Down Package APGM0041 YWWXXX Primary Applications Point-to-Point Radio SatCom Radio Location Description The MAAPGM0041 is a packaged, 3-stage, 1.3 W power amplifier with on-chip bias networks in a bolt down ceramic package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications. Fabricated using M/A-COM's repeatable, high performance and highly reliable GaAs Multifunction Self-Aligned Gate (MSAGTM) Process, each device is 100% RF tested on wafer to ensure performance compliance. M/A-COM's MSAGTM process features robust silicon-like manufacturing processes, planar processing of ion implanted transistors, multiple implant capability enabling power, low-noise, switch and digital FETs on a single chip, and polyimide scratch protection for ease of use with automated manufacturing processes. The use of refractory metals and the absence of platinum in the gate metal formulation prevents hydrogen poisoning when employed in hermetic packaging. Pin Number 1 2 3 4 5 6 7 8 9 10 Description No Connection No Connection RF IN No Connection VGG No Connection No Connection RF OUT No Connection VDD Maximum Operating Conditions 1 Parameter Input Power Drain Supply Voltage Gate Supply Voltage Quiescent Drain Current (No RF, 40% Idss) Quiescent DC Power Dissipated (No RF) Junction Temperature Storage Temperature Processing Temperature 1. Operation outside of these ranges may reduce product reliability. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Symbol PIN VDD VGG IDQ PDISS TJ TSTG Absolute Maximum 21.0 +12.0 -3.0 810 6.5 180 -55 to +150 230 Units dBm V V mA W C C C * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 1.3W 11.5--15.0 GHz Recommended Operating Conditions Characteristic Drain Supply Voltage Gate Supply Voltage Input Power Junction Temperature Thermal Resistance Package Base Temperature Symbol VDD VGG PIN TJ JC TB 14.7 Note 2 Min 4.0 -2.4 Typ 8.0 -2.0 16.0 Max 10.0 -1.5 19.0 150 MAAPGM0041 903208 -- Preliminary Information Unit V V dBm C C/W C 2. Maximum Package Base Temperature = 150C -- JC* VDD * IDQ Electrical Characteristics: TB = 40C3, Z0 = 50 , VDD = 8V, IDQ 460 mA, Pin = 16 dBm, RG 150 Parameter Bandwidth Output Power Power Added Efficiency 1-dB Compression Point Small Signal Gain Input VSWR Output VSWR Gate Supply Current Drain Supply Current Noise Figure 2 nd Symbol f POUT PAE P1dB G VSWR VSWR IGG IDD NF 2f 3f OTOI IM3 IM5 Typical 11.5-15.0 31 24 30 19 2.5:1 1.7:1 <2 < 700 7 -28 -35 34 -7 -23 Units GHz dBm % dBm dB mA mA dB dBc dBc dBm dBm dBm Harmonic 3rd Harmonic Output Third Order Intercept 3 Order Intermodulation Distortion, Single Carrier Level = 20 dBm 5th Order Intermodulation Distortion, Single Carrier Level = 20 dBm rd 3. Adjust VGG between -2.4 to -1.5V to achieve indicated IDQ. Operating Instructions This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply VGG = -1.8 V, VDD= 0 V. 2. Ramp VDD to desired voltage, typically 8 V. 3. Adjust VGG to set IDQ, (approxmately @ -1.8V). 4. Set RF input. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 1.3W 11.5--15.0 GHz 50 POUT PAE 40 40 40 MAAPGM0041 903208 -- Preliminary Information 50 50 POUT PAE 50 40 30 30 30 30 20 20 20 20 10 10 10 10 0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 0 15.5 0 4 5 6 7 8 9 10 0 Frequency (GHz) Figure 1. Output Power and Power Added Efficiency vs. Frequency at VDD = 8V and Pin = 16 dBm. Drain Voltage (V) Figure 2. Saturated Output Power and Power Added Efficiency vs. Drain Voltage at fo = 13 GHz. 50 VDD = 4 VDD = 8 40 VDD = 6 VDD = 10 30 Gain Input VSWR Output VSWR 6 25 5 30 20 4 20 15 3 10 10 2 0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 Frequency (GHz) 5 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 Frequency (GHz) 1 15.5 Figure 3. 1dB Compression Point vs. Frequency Figure 4. Small Signal Gain and VSWR vs. Frequency at VDD = 8V. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 1.3W 11.5--15.0 GHz MAAPGM0041 903208 -- Preliminary Information APGM0041 Figure 5. CR-15 Package Dimensions The CR-15 is a high frequency, low thermal resistance package. The package consists of a cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. The finish consists of electrolytic gold over nickel plate. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Amplifier, Power, 1.3W 11.5--15.0 GHz MAAPGM0041 903208 -- Preliminary Information 100 pF VDD 0.1 F APGM0041 YWWXXX RFIN RFOUT RG (See Electrical Characteristics - Page 2) Pin Number 1 100 pF Description No Connection No Connection RF IN No Connection VGG No Connection No Connection RF OUT No Connection VDD VGG 0.1 F 2 3 4 5 6 7 Figure 6. Recommended Bias Configuration 8 9 10 Assembly Instructions: This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically conductive, ductile material should be used prior to installation of the CR-15 to improve the thermal and electrical performance of the package to housing interface. Refer to M/A-COM Application Note #M567* for more information . For applications where surface mount components are to be installed after the CR-15 installation, this package will not be damaged when subjected to typical convection or IR oven reflow profiles. Refer to M/A-COM Application Note #M538* for maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static discharge (ESD) safe. * Application Notes can be found by going to the Site Search Page on M/A-COM's web page (http://www.macom.com/search/search.jsp) and searching for the required Application Note. Biasing Notes: The 100pF bypass capacitors must be placed as close to the VGG and VDD pins as possible (recommended < 100 mils). A negative bias must be applied to VGG before applying a positive bias to VDD to prevent damage to the amplifier. 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MAAPGM0041
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |