 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC-C007 v00.1204 DIVIDE-BY-8 PRESCALER MODULE, 0.5 - 18 GHz Features Ultra Low SSB Phase Noise: -150 dBc/Hz Very Wide Bandwidth Output Power: -4 dBm Single DC Supply: +5V 10 FREQUENCY DIVIDERS - CONNECTORIZED MODULES Typical Applications Prescaler for 0.5 to 18 GHz PLL Applications: * Point-to-Point / Multi-Point Radios * VSAT Radios * Fiber Optic * Test Equipment * Military & Space Hermetically Sealed Module Field Replaceable SMA Connectors -55 to +85 C Operating Temperature General Description The HMC-C007 is a low noise Divide-by-8 Static Divider utilizing InGaP GaAs HBT technology packaged in a miniature, hermetic module with replacable SMA connectors. This device operates from 0.5 to 18 GHz input frequency from a single +5.0V DC supply. The low additive SSB phase noise of -150 dBc/Hz at 100 kHz offset helps the user maintain excellent system noise performance. Functional Diagram Electrical Specifications, TA = +25 C, 50 Ohm System, Vcc= +5V Parameter Maximum Input Frequency Minimum Input Frequency Input Power Range Sine Wave Input Fin = 2 to 4 GHz Fin = 4 to 12 GHz Fin = 12 to 14 GHz Fin = 14 to 18 GHz Output Power Reverse Leakage SSB Phase Noise (100 kHz offset) Output Transition Time Supply Current (Icc) Fin = 0.5 to 18 GHz Fin = 0.5 to 18 GHz Pin = 0 dBm, Fin = 4.8 GHz Pin = 0 dBm, Fout = 882 MHz -10 -15 -15 -10 -7 -15 -20 -20 -15 -4 55 -150 100 98 Conditions Min. 18 Typ. 19 0.5 +10 +10 +5 0 Max. Units GHz GHz dBm dBm dBm dBm dBm dB dBc/Hz ps mA 10 - 10 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C007 v00.1204 DIVIDE-BY-8 PRESCALER MODULE, 0.5 - 18 GHz Input Sensitivity Window, T= 25 C 15 10 INPUT POWER (dBm) Input Sensitivity vs. Temperature 15 10 INPUT POWER (dBm) 5 0 -5 -10 -15 -20 -25 Min Pin +25C Max Pin +25C Min Pin +85C Max Pin +85C Min Pin -55C Max Pin -55C 10 FREQUENCY DIVIDERS - CONNECTORIZED MODULES 10 - 11 5 0 -5 -10 -15 -20 -25 0 2 4 6 8 10 12 14 16 18 20 INPUT FREQUENCY (GHz) Recommended Operating Window 0 2 4 6 8 10 12 14 16 18 20 INPUT FREQUENCY (GHz) Output Power vs. Temperature 0 -1 OUTPUT POWER (dBm) -2 -3 -4 -5 -6 -7 -8 -9 -10 0 2 4 6 8 10 12 14 16 18 20 INPUT FREQUENCY (GHz) +25C +85C -55C SSB Phase Noise Performance, Pin= 0 dBm, T= 25 C 0 -20 SSB PHASE NOISE (dBc/Hz) -40 -60 -80 -100 -120 -140 -160 2 10 10 3 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) Output Harmonic Content, Pin= 0 dBm, T= 25 C 0 -10 OUTPUT LEVEL (dBm) -20 -30 -40 -50 -60 -70 0 2 4 6 8 10 12 14 16 18 20 INPUT FREQUENCY (GHz) Pfeedthru 2nd Harmonic 3rd Harmonic Reverse Leakage, Pin= 0 dBm, T= 25 C 0 -10 OUTPUT LEVEL (dBm) -20 -30 -40 -50 -60 -70 -80 0 2 4 6 8 10 12 14 16 18 20 INPUT FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C007 v00.1204 DIVIDE-BY-8 PRESCALER MODULE, 0.5 - 18 GHz 10 FREQUENCY DIVIDERS - CONNECTORIZED MODULES Output Voltage Waveform, Pin= 0 dBm, Fout= 882 MHz, T= 25 C 200 150 100 AMPLITUDE (mV) 50 0 -50 Absolute Maximum Ratings Supply Voltage (Vcc) RF Input (Vcc = +5V) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +5.5V +13 dBm -65 to +150 C -55 to +85 C Class 1A -100 -150 -200 23 23.2 23.4 23.6 23.8 24 24.2 24.4 24.6 24.8 25 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Typical Supply Current vs. Vcc Vcc 4.75 5.0 5.25 Icc (mA) 87 98 110 TIME (nS) Note: Divider will operate over full voltage range shown above Pin Description Pin Number Function Description Interface Schematic 1 RFIN & RF Ground RF input connector, SMA female, field replaceable. RF Input is AC coupled. 2 RFOUT & RF Ground RF output connector, SMA female,field replaceable. Divided output is AC coupled. 3 Vcc Supply voltage 5V 0.25V. 4 GND Power supply ground. 10 - 12 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C007 v00.1204 DIVIDE-BY-8 PRESCALER MODULE, 0.5 - 18 GHz Outline Drawing 10 FREQUENCY DIVIDERS - CONNECTORIZED MODULES 10 - 13 NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVARTM 2. BRACKET MATERIAL: ALUMINUM 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES .005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602 - 5CCSF OR EQUIVALENT. 7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80 HARDWARE WITH DESIRED MOUNTING SCREWS. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com |
Price & Availability of HMC-C007
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |