 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SENSITRON ____ SEMICONDUCTOR TECHNICAL DATA DATA SHEET 202, REV - SHD52624 FIXED NEGATIVE 5.0 VOLT 1.5 AMP REGULATOR FEATURES: * ISOLATED HERMETIC PACKAGE * SIMILAR to INDUSTRY TYPE LM7905A MAXIMUM RATINGS Parameter Input Voltage Storage Temperature Range Lead Temperature Power Dissipation (PD) Maximum Thermal Resistance Junction to Case ( JC) Maximum Thermal Resistance Junction to Ambient ( JA) Maximum Junction Temperature (TJ) Ambient Operating Temperature Range (TA) Input Voltage Range Recommended Conditions Soldering, 10 seconds TC = +25C TA = +25C IO = 5.0 mA to 1.0 A All ratings are at TA = 25C unless otherwise specified. Typical Limit -35 -65 to +150 +300 15 3.0 4.2 42 150 -55 to +125 -6.5 to -25 Units Vdc C C W W C/W C/W C C Vdc ELECTRICAL CHARACTERISTICS Parameter Output Voltage (VOUT) Line Regulation (VRLINE) Load Regulation (VRLOAD) Standby Current Drain (ISCD) Standby Current Drain Change w/Line (ISCD) (Line) Standby Current Drain Change w/Load (ISCD) (Load) Dropout Voltage (VDO) Peak Output Current (IO(pk)) Short Circuit Current (IOS) Ripple Rejection (VIN / VOUT) Output Noise Voltage (NO) Long Term Stability (VOUT / t) Conditions TA = +25C -55C TJ +125C VIN = -25V to -7V -55C TJ +125C IO = 5.0 mA to 1.5 A VIN = -25 V to -7.0 V IO = 5.0 mA to 1000 mA I = 1.0A O Typical -5.00 Limit -4.95 -5.05 20 32 3.5 0.8 0.5 1.1 3.3 1.2 40 120 Units V V mV mV mA mA mA V A A dB Vrms mV 56 - TA = +25C VIN = -35V f = 120 kHz, VIN = 10V O O I = 5.0mA TA = +25C 10 Hz - 100kHz TA = 25C, t = 1,000 Note: Output Voltage tolerance; +/- 1% @ 25 C, +/- 2% from -55 to +80 C * 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 * * World Wide Web - www.sensitron.com * E-mail Address - sales@sensitron.com * SENSITRON SHD52624 DATASHEET 202 REVISION - MECHANICAL DIMENSIONS TO-257 .150 (3.81 Dia. .140 3.56) .420 (10.67 .410 10.41) .200 (5.08 .190 4.82) .045 (1.14 .035 0.89) .537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21) .665 (16.89 .645 16.38) .430 (10.92 .410 10.41) 123 .035 (0.89 .025 0.63) 3 Places .100(2.54) BSC 2 Places .120(3.05) BSC PINOUT TABLE TYPE TO - 257, -5V Regulator PIN 1 GROUND PIN 2 VIN PIN 3 VOUT DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 * * World Wide Web - www.sensitron.com * E-mail Address - sales@sensitron.com * |
Price & Availability of SHD52624
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |