View AZ695-5G_650601.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ695
SENSITIVE SUBMINIATURE RELAY
FEATURES * Extremely small footprint utilizing only 0.18 square inch of PCB area * Thin vertical profile only 0.256" wide * 1 Form A contact with up to 5 Amp switching capability * High sensitivity, 100 mW pickup * Dielectric strength 3000 Vrms contact to coil * Coils to 24 VDC * Epoxy sealed for automatic wave soldering and cleaning * Sockets are also available * UL file E44211; CSA file 74461 CONTACTS
Arrangement Ratings SPST (1 Form A) Resistive load: Max. switched power: 150 W or 1250 VA Max. switched current: 5 A Max. switched voltage: 150* VDC or 250 VAC Inductive load (p.f. = 0.40, L/R = 7 ms) 2 A at 250 VAC, 30 VDC UL Rating: 5 A at 30 VDC or 250 VAC 1/ 10 HP 120 VAC
Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 20 million operations 1 X 105 at 5 A, 30 VDC or 250 VAC 6 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression)
Dielectric Strength 750 Vrms between open contacts (at sea level for 1 min.) 3000 Vrms contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 100 megohms min. at 20C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40C (-40F) to 70C (158F) -40C (-40F) to 105C (221F) 0.062" DA at 10-55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 3 grams
Material
Options: Silver cadmium oxide Silver cadmium oxide with gold plating < 30 milliohms initially (at rated current, voltage drop method)
Resistance
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 100 mW 550 mW at 20C (68F) ambient 420 mW at 40C (104F) ambient 25C (45F) at nominal coil voltage Max. 105C (221F)
Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time
NOTES
1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Minimum permissible contact load: SCO contact: 100 mA at 5 VDC SCO contact with gold plating: 10 mA at 5 VDC 4. Specifications subject to change without notice.
Weight
ZETTLER
electronics
2000-08-31
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
AZ695
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil VDC 5 6 9 12 18 24 Max. Continuous VDC 8.4 10.1 15.2 20.2 29.5 40.5 Coil Resistance 10% 125 180 405 720 1,620 2,880 Must Operate VDC 3.5 4.2 6.3 8.4 12.6 16.8
ORDER NUMBER
SCO Contact AZ695-5 AZ695-6 AZ695-9 AZ695-12 AZ695-18 AZ695-24 SCO with Gold Plating Contact AZ695-5G AZ695-6G AZ695-9G AZ695-12G AZ695-18G AZ695-24G
HARDWARE ORDERING DATA
DESCRIPTION
Socket
ORDER NUMBER
ST695
MECHANICAL DATA
.012 (0.3) .690 (17.5) .012 (0.3) .256 (6.5) .772 (19.6)
HARDWARE
.264 (6.7)
.272 (6.9) .492 (12.5) .244 (6.2) 0.13 (3.3) .032 (0.8) 0.2 (5.08) .020 (0.5) 0.3 (7.62) 0.1 (2.54) .012 (0.3) .035 (0.9) 0.2 (5.08) 0.2 (5.04) .012 (0.3) .032 (0.8)
.008 (0.2) .079 (2.0)
0.2 (5.08)
0.3 (7.62)
0.1 (2.54)
PC BOARD LAYOUT
.043 (1.1) DIA 0.2 (5.08)
WIRING DIAGRAM
0.2 (5.08)
0.3 (7.62)
0.1 (2.54)
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
Viewed toward terminals
ZETTLER
electronics
2000-08-31
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700

▲Up To Search▲

Price & Availability of AZ695-5G

	To Download AZ695-5G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .