 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IDW75E60 Features: * 600 V EmCon technology * Fast recovery * Soft switching * Low reverse recovery charge * Low forward voltage * 175 C junction operating temperature * Easy paralleling * Pb-free lead plating; RoHS compliant * Complete product spectrum and PSpice Models: http://www.infineon.com/emcon/ Applications: * Welding * Motor drives A C PG-TO-247-3-21 Type IDW75E60 Maximum Ratings Parameter VRRM 600V IF 75A VF,Tj=25C 1.65V Tj,max 175C Marking D75E60 Package PG-TO-247-3-21 Symbol VRRM IF Value 600 120 82 75 Unit V A Repetitive peak reverse voltage Continuous forward current TC = 25C TC = 90C TC = 100C Surge non repetitive forward current TC = 25C, tp = 10 ms, sine halfwave Maximum repetitive forward current TC = 25C, tp limited by tj,max, D = 0.5 Power dissipation TC = 25C TC = 90C TC = 100C Operating junction and storage temperature Soldering temperature 1.6mm (0.063 in.) from case for 10 s IFSM IFRM Ptot 220 225 A A W 300 170 150 Tj, Tstg TS -55...+175 260 C C Power Semiconductors 1 Rev. 1.1 Mar 06 IDW75E60 Thermal Resistance Parameter Characteristic Thermal resistance, junction - case Thermal resistance, junction - ambient Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Symbol Conditions Value min. typ. max. Unit RthJA 40 RthJC 0.5 K/W Symbol Conditions Max. Value Unit Static Characteristic Collector-emitter breakdown voltage Diode forward voltage VRRM VF IR=0.25mA 600 - 1.65 1.65 - 2.0 - V I F = 75 A T j =2 5 C T j =1 7 5 C Reverse leakage current IR V R = 6 00 V T j =2 5 C T j =1 7 5 C 40 1000 A Dynamic Electrical Characteristics Diode reverse recovery time Diode reverse recovery charge Diode peak reverse recovery current Diode peak rate of fall of reverse recovery current during t b Diode reverse recovery time Diode reverse recovery charge Diode peak reverse recovery current Diode peak rate of fall of reverse recovery current during t b Diode reverse recovery time Diode reverse recovery charge Diode peak reverse recovery current Diode peak rate of fall of reverse recovery current during t b trr Qrr Irr dI r r / d t T j =2 5 C V R = 4 00 V , I F = 7 5 A, dI F / dt = 1 46 0 A/ s 121 2.4 38.5 921 ns C A A/s trr Qrrm Irr dI r r / d t T j =1 2 5 C V R = 4 00 V , I F = 7 5 A, dI F / dt = 1 46 0 A/ s - 155 4.4 46.6 960 - ns C A A/s trr Qrrm Irr dI r r / d t T j =1 7 5 C V R = 4 00 V , I F = 7 5 A, dI F / dt = 1 46 0 A/ s - 182 5.8 56.2 1013 - ns C A A/s Power Semiconductors 2 Rev. 1.1 Mar 06 IDW75E60 300W 120A 250W Ptot, POWER DISSIPATION IF, FORWARD CURRENT 90A 200W 150W 60A 100W 30A 50W 0W 25C 50C 75C 100C 125C 150C 0A 25C 75C 125C TC, CASE TEMPERATURE Figure 1. Power dissipation as a function of case temperature (Tj 175C) TC, CASE TEMPERATURE Figure 2. Diode forward current as a function of case temperature (Tj 175C) 200A TJ=25C 2.0V IF=150A 150A VF, FORWARD VOLTAGE 175C IF, FORWARD CURRENT 1.5V 75A 100A 37.5A 1.0V 50A 0.5V 0A 0V 1V 2V 0.0V 0C 50C 100C 150C VF, FORWARD VOLTAGE Figure 3. Typical diode forward current as a function of forward voltage TJ, JUNCTION TEMPERATURE Figure 4. Typical diode forward voltage as a function of junction temperature Power Semiconductors 3 Rev. 1.1 Mar 06 IDW75E60 Qrr, REVERSE RECOVERY CHARGE 200ns trr, REVERSE RECOVERY TIME TJ=175C 5C T J=175C 4C 150ns 3C 100ns TJ=25C 50ns 2C T J=25C 1C 0ns 1000A/s 1500A/s 0C 1000A/s 1500A/s diF/dt, DIODE CURRENT SLOPE Figure 5. Typical reverse recovery time as a function of diode current slope (VR=400V, IF=75A, Dynamic test circuit in Figure E) diF/dt, DIODE CURRENT SLOPE Figure 6. Typical reverse recovery charge as a function of diode current slope (VR = 400V, IF = 75A, Dynamic test circuit in Figure E) T J =175C 60A -1200A/s T J=175C T J=25C 50A 40A dirr/dt, DIODE PEAK RATE OF FALL OF REVERSE RECOVERY CURRENT Irr, REVERSE RECOVERY CURRENT -1000A/s -800A/s T J =25C 30A 20A 10A 0A -600A/s -400A/s -200A/s 1000A/s 1500A/s 0A/s 1000A/s 1500A/s diF/dt, DIODE CURRENT SLOPE Figure 7. Typical reverse recovery current as a function of diode current slope (VR = 400V, IF = 75A, Dynamic test circuit in Figure E) diF/dt, DIODE CURRENT SLOPE Figure 8. Typical diode peak rate of fall of reverse recovery current as a function of diode current slope (VR=400V, IF=75A, Dynamic test circuit in Figure E) Power Semiconductors 4 Rev. 1.1 Mar 06 IDW75E60 ZthJC, TRANSIENT THERMAL RESISTANCE D=0.5 10 K/W -1 0.2 0.1 0.05 0.02 0.01 R,(K/W) 0.0556 0.1757 0.12374 0.12192 0.02305 R1 , (s) 0.1495 0.02797 3.623 E-3 3.276 E-4 2.635 E-5 R2 10 K/W -2 single pulse C 1 = 1 /R 1 C 2 = 2 /R 2 1s 10s 100s 1ms 10ms 100ms tP, PULSE WIDTH Figure 9. Diode transient thermal impedance as a function of pulse width (D=tP/T) PG-TO247-3-1 Power Semiconductors 5 Rev. 1.1 Mar 06 IDW75E60 Published by Infineon Technologies AG, Bereich Kommunikation Am Campeon 1-12, D-85579 Neubiberg (c) Infineon Technologies AG 2006 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Power Semiconductors 6 Rev. 1.1 Mar 06 |
Price & Availability of IDW75E60
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |