View MIL1112SNAD25_697896.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

C&K MIL Series 1-4 Pole Miniature Right
Typical Applications * Telecom switching equipment * Military communications 5 banks per switch * Instrumentation * Totally sealed (insert molded contacts * Medical monitors Features/Benefits * Bushing option for panel mounting * 1 to 4 poles per bank and up to
and terminals)
* Low profile - 12 mm above PCB
Specifications
CONTACT RATING: Switch: 20 mA, 1 VA max. resistive load Carry: 1 AMP. ELECTRICAL LIFE: 20,000 operations. OPERATING TORQUE: < 6 Ncm. STOP STRENGTH: > 50 Ncm. CONTACT RESISTANCE: < 40 m INSULATION RESISTANCE: 109 DIELECTRIC STRENGTH: 500 V rms OPERATING TEMPERATURE: -40C to + 85C STORAGE TEMPERATURE: -55C to + 85C
NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.
Materials
HOUSING: Thermoplastic (nylon) and thermoset (diallyl phthalate) ACTUATOR: Steel MOVABLE CONTACTS: Brass, gold plated. ROTOR: Thermoset (polysulfone) O-RING: Silicone STATIONARY CONTACTS & TERMINALS: Brass, gold plated. TERMINAL SEAL: Totally sealed (insert molded). BUSHING: Brass STOP PIN: Stainless steel HARDWARE: Nut: Brass, nickel plated. Washer: Brass, nickel plated. Gasket: Neopren.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-23 thru K-25. For additional options not shown in catalog, consult Customer Service Center.
K Rotary
Designation MIL Number of Banks 1 (STD.) 1 Bank 2 2 Banks Switch Function 3 3 Banks 112S (STD.) SP, 30 Index, 12 pos. no stop 4 4 Banks 102B02 SP, 30 Index, 2 pos. 5 5 Banks Switching Mode 103B03 SP, 30 Index, 3 pos. N (STD.) Non-shorting BBM (break-before-make) 104B04 SP, 30 Index, 4 pos. C Shorting, MBB (make-before-break) 105B05 SP, 30 Index, 5 pos. 106B06 107B07 108B08 109B09 110B10 111B11 112B12 206S 202B02 203B03 204B04 205B05 206B06 303S 302B02 303B03 402S 402B02 SP, 30 Index, 6 pos. Mounting Style SP, 30 Index, 7 pos. SD (STD.) Without panel mount SP, 30 Index, 8 pos. AD (STD.) With panel mount SP, 30 Index, 9 pos. Actuator Option SP, 30 Index, 10 pos. (NONE) (STD.) 4 mm diameter shaft SP, 30 Index, 11 pos. M10X3 4 mm shaft with flat (STD.) SP, 30 Index, 12 pos. F2X1 4 mm shaft with screwdriver slot (STD.) DP, 30 Index, 6 pos. no stop Actuator Option Angle* DP, 30 Index, 2 pos. (NONE) (STD.) DP, 30 Index, 3 pos. K0 0 angle DP, 30 Index, 4 pos. K30 30 angle DP, 30 Index, 5 pos. K60 60 angle Actuator Option Length** (STD.) DP, 30 Index, 6 pos. K90 90 angle 25 (STD.) 25 mm standard shaft 3P, 30 Index, 3 pos. no stop 3P, 30 Index, 2 pos. 3P, 30 Index, 3 pos. 4P, 30 Index, 2 pos. no stop 4P, 30 Index, 2 pos. K120 120 angle K180 180 angle K270 270 angle
* Other angles available by request ** Other lengths available by request.
Dimensions are shown: IN (mm) Dimensions subject to change
K-22
www.ittcannon.com
C&K MIL Series 1-4 Pole Miniature Right
DESIGNATION
MIL
NUMBER OF BANKS
OPTION CODE WITH BUSHING DIM. `L' .897 (22,78) 1.597 (40,56) 2.297 (58,34) 3.00 (76,12) 3.697 (93,90)
DIM. `L' .770 (17,78) 1.400 (35,56) 2.100 (53,34) 2.800 (71,12) 3.500 (88,90)
1 2 3 4 5
SWITCH FUNCTION
30 INDEXING NO. POLES MODEL NO. SWITCH FUNCTION 12 Position No Stops 2 Positions 3 Positions 4 Positions 5 Positions DP MODELS SCHEMATIC 6 Positions 7 Positions 8 Positions 9 Positions Pos. 11 21 31 41 51 61 12 22 32 42 52 62 10 Positions 11 Positions 12 Positions 4P Pos. 11 21 12 2 2 13 23 14 24 3P A1 A2 4P MODELS SCHEMATIC A1 A2 A3 A4 Pos. Pos. 11 21 31 12 2 2 3 2 13 2 3 3 3 DP SP MODELS SCHEMATIC A 3P MODELS SCHEMATIC A1 A2 A3 NO. POLES 30 INDEXING MODEL NO. SWITCH FUNCTION 4 Position No Stops 2 Positions 3 Positions 4 Positions 5 Positions 6 Positions 3 Positions No Stop 2 Positions 3 Positions 2 Positions No Stop 2 Positions
K Rotary
112S 102B02 103B03 104B04 105B05
SP
206S 202B02 203B03 204B04 205B05 206B06 303S 302B02 303B03 402S 402B02
106B06 107B07 108B08 109B09 110B10 111B11 112B12
Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change
K-23
www.ittcannon.com
C&K MIL Series 1-4 Pole Miniature Right
SWITCHING MODE
N C
(STD.) NON-SHORTING, BBM (break-before-make) SHORTING, MBB (make-before-break)
MOUNTING STYLE
SD
WITHOUT
AD
WITH PANEL MOUNT
PANEL MOUNTING
K Rotary
ACTUATOR OPTION
(NONE)
(STD.) .157 DIA. (4,0)
F2X1
SCREWCRIVER SLOT
.157 DIA. (4,0) .079 (2,0) .039 (1,0)
M10X3
FLAT
.157 DIA. (4,0)
Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change
K-24
www.ittcannon.com
C&K MIL Series 1-4 Pole Miniature Right
ACTUATOR OPTION ANGLE
(NONE)
(STD.)
K0
(STD.) 0 ANGLE
K30
30
K60
60
K90
90
K180 K120
120
210
K270
300
K0
(STD.) 0 ANGLE
K Rotary
K30
30
K60
60
K90
90
K120
120
ACTUATOR LENGTH
25
0,25 mm (.984) STANDARD SHAFT
Other lengths available by request.
Dimensions are shown: IN (mm) Dimensions subject to change
K-25
www.ittcannon.com

▲Up To Search▲

Price & Availability of MIL1112SNAD25

	To Download MIL1112SNAD25 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .