![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
T1635H Series SnubberlessTM high temperature 16 A Triacs Main features Symbol IT(RMS) VDRM/VRRM IGT (Q1) Value 16 600 35 Unit A V mA A2 G A1 A2 A1 G A2 Description Specifically designed to operate at 150 C, the new 16 A T1635H Triacs provide an enhanced performance in terms of power loss and thermal dissipation. This facilitates the optimization of heatsink dimensioning, leading to improved space and cost effectiveness when compared to electromechanical solutions. Based on ST SnubberlessTM technology, the T1635H series offers high commutation switching capabilities and high noise immunity levels on the full range of Tj. The T1635H series facilitates the optimization of the control of universal motors and inductive loads found in appliances such as vacuum cleaners, and washing machines. The T1635H Triacs are also suitable for use in high temperature environment found in hot appliances such as cookers, ovens, hobs, electric heaters, and coffee machines. D2PAK T1635H-G A2 TO-220AB Insulated T1635H-I G A1 A2 TO-220AB T1635H-T Order code Part number T1635H-600G T1635H-600G-TR T1635H-600TRG T1635H-600IRG Marking T1635H-600G T1635H-600G T1635H-600T T1635H-600I TM: Snubberless is a trademark of STMicroelectronics August 2006 Rev 1 1/10 www.st.com Characteristics T1635H Series 1 Table 1. Symbol Characteristics Absolute maximum ratings Parameter D2PAK TO-220AB TO-220AB Ins ITSM It dI/dt Non repetitive surge peak on-state current (full cycle sine wave, Tj initial = 25 C) It Value for fusing Critical rate of rise of on-state current IG = 2xIGT, tr 100 ns Non repetitive surge peak off state voltage Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range tp = 20 s F = 60 Hz F = 50 Hz Tc = 130 C Tc = 110 C t = 16.7 ms t = 20 ms tp = 10 ms F = 120 Hz Tj = 150 C Tj = 25 C Tj = 150 C Tj = 150 C 170 A 160 128 50 700 4 1 -40 to +150 -40 to +150 A2s A/s V A W C Value Unit IT(RMS) RMS on-state current (full sine wave) 16 A VDSM/VRSM IGM PG(AV) Tstg Tj Table 2. Symbol IGT (1) VGT VGD IH (2) Electrical characteristics (Tj = 25 C, unless otherwise specified) Test conditions VD = 12 V, RL = 33 VD = VDRM, RL =3.3 k IT = 100 mA I - III IG = 1.2 x IGT VD = 67% VDRM, gate open, Tj = 150 C Without snubber, Tj = 150 C Quadrant II - III II - III II - III MAX MAX MIN MAX MAX II MIN MIN 80 300 7.1 Value 35 1.3 0.15 35 50 Unit mA V V mA mA IL dV/dt (2) (dI/dt)c (2) V/s A/ms 1. minimum IGT is guaranteed at 5% of IGT max 2. for both polarities of A2 referenced to A1 2/10 T1635H Series Table 3. Symbol VTM (1) VTO RD (1) (1) Characteristics Static electrical characteristics Test conditions ITM= 22.5 A, tp = 380 s Tj = 25 C Tj = 150 C Tj = 150 C Tj = 25 C VDRM = VRRM VD/VR = 400 V (at peak mains voltage) MAX MAX MAX Value 1.5 0.80 23 5 MAX 6.4 mA Tj = 150 C 4.2 Unit V V m A IDRM IRRM Tj = 150 C 1. for both polarities of A2 referenced to A1 Table 4. Symbol Thermal resistance Parameter D2PAK TO-220AB TO-220AB Ins SCU = 1 cm D2PAK TO-220AB TO-220AB Ins Value 1.2 2.1 C/W 45 60 Unit Rth (j-c) Junction to case (AC) Rth (j-a) Junction to ambient Figure 1. P(W) 18 16 14 12 10 8 6 4 2 0 0 2 =180 Maximum power dissipation Figure 2. vs RMS on-state current (full cycle) IT(RMS) (A) 18 RMS on-state current vs case temperature (full cycle) TO-220AB/DPAK 16 14 12 10 8 6 180 TO-220AB Insulated 4 2 0 =180 IT(RMS)(A) 4 6 8 10 12 14 16 TC(C) 25 50 75 100 125 150 0 3/10 Characteristics T1635H Series Figure 3. IT(RMS) (A) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 25 RMS on-state current vs ambient Figure 4. temperature, PCB FR4, eCU = 35 m 1.E+00 =180 DPAK SCU=1 cm Relative variation of thermal impedance vs pulse duration K=[Zth/Rth] Zth(j-c) 1.E-01 Zth(j-a) 1.E-02 Tamb(C) 50 75 100 125 150 1.E-03 1.E-03 1.E-02 1.E-01 tP(s) 1.E+00 1.E+01 1.E+02 1.E+03 Figure 5. Relative variation of gate trigger current, holding current and latching current vs junction temperature (typical values) Figure 6. Surge peak on-state current vs number of cycles IGT, IH, IL [T j] / IGT, IH, IL [T j=25C] 2.5 180 160 ITSM (A) 2.0 IGT 140 120 Non repetitive Tj initial=25 C t=20ms One cycle 1.5 IH & IL 100 80 60 Repetitive Tc=113 C 1.0 0.5 Tj(C) 0.0 -40 -20 0 20 40 60 80 100 120 140 160 40 20 Number of cycles 0 1 10 100 1000 Figure 7. Figure 8. Non repetitive surge peak on-state current (sinusoidal pulse width tp<10 ms) and corresponding value of It 100 Tj initial=25 C On-state characteristics (maximum values) 10000 ITSM(A), It (As) ITM(A) dI/dt limitation: 50 A/s Tj=150 C Tj=25 C 1000 ITSM 10 tP(ms) 100 0.01 0.10 1.00 It Tj max. : VT0 = 0.80 V RD = 23 mW VTM(V) 10.00 1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4/10 T1635H Series Characteristics Figure 9. Relative variation of critical rate Figure 10. Relative variation of critical rate of of decrease of main current (di/dt)c decrease of main current (di/dt)c vs versus junction temperature reapplied dV/dt (typical values) 2.0 1.8 1.6 (dI/dt)c [T j] / (dI/dt)c [T j=150C] 8 7 6 (dI/dt)c [ (dV/dt) c ] / Specified (dI/dt) c 1.4 5 4 3 2 1.2 1.0 0.8 0.6 0.4 1 Tj(C) 0 25 50 75 100 125 150 0.2 0.0 0.1 1.0 dV/dt (V/s) 10.0 100.0 Figure 11. Variation of thermal resistance, junction to ambient versus copper surface under tab (PCB FR4, eCU 35 m) Rth(j-a) (C/W) 80 DPAK Figure 12. Leakage current versus junction temperature for different values of blocking voltage (typical values) IDRM/IRRM(mA) 1.E+01 70 1.E+00 VDRM=VRRM=600 V 60 50 40 30 20 1.E-03 1.E-02 1.E-01 VDRM=VRRM=400 V VDRM=VRRM=200 V 10 SCU(cm) 0 0 5 10 15 20 25 30 35 40 1.E-04 50 75 100 125 150 T j(C) Figure 13. Acceptable repetitive peak off-state voltage versus caseambient thermal resistance Rth(c-a) (C/W) 10 9 8 7 6 5 4 3 2 1 0 300 350 400 450 500 550 600 VDRM/VRRM(V) Rth(j-c)=1.2 C/W TJ=150 C 5/10 Ordering information scheme T1635H Series 2 Ordering information scheme T Triac series Current 16 = 16 A Sensitivity 35 = 35 mA High temperature Voltage 600 = 600 V Package G = D2PAK I = TO-220AB Ins T = TO-220AB Packing mode Blank = Tube (D2PAK) -TR = Tape and reel (D2PAK) RG = Tube (TO-220AB) 16 35 H - 600 I (-TR) 6/10 T1635H Series Package information 3 Package information Table 5. TO-220AB and TO-220AB Insulated dimensions Dimensions Ref. Millimeters Min. A a1 B OI L F A I4 l3 a1 l2 c2 b2 C Inches Min. Typ. Max. 0.625 0.147 Typ. Max. 15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75 15.90 0.598 a2 B b1 b2 C c1 c2 e 14.00 0.511 10.40 0.393 0.88 1.32 4.60 0.70 2.72 2.70 6.60 3.85 0.024 0.048 0.173 0.019 0.094 0.094 0.244 0.147 0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.106 0.259 0.151 a2 M b1 e c1 F OI I4 L l2 l3 M 15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 1.14 2.60 2.95 1.70 1.70 0.104 0.044 0.044 0.102 0.116 0.066 0.066 7/10 Package information Table 6. D2PAK Mechanical data T1635H Series DIMENSIONS REF. Millimeters Min. A A E L2 C2 Inches Min. 0.173 0.098 0.001 0.027 0.045 0.017 0.048 0.352 0.393 0.192 0.590 0.050 0.055 0.094 Max. 0.181 0.106 0.009 0.037 0.067 0.024 0.054 0.368 0.409 0.208 0.624 0.055 0.069 0.126 Max. 4.60 2.69 0.23 0.93 1.70 0.60 1.36 9.35 10.40 5.28 15.85 1.40 1.75 3.20 4.40 2.49 0.03 0.70 1.14 0.45 1.23 8.95 10.00 4.88 15.00 1.27 1.40 2.40 A1 A2 B D L L3 A1 B2 B G A2 2mm min. FLAT ZONE R B2 C C2 C D E G L L2 V2 L3 M R V2 0.40 typ. 0 8 0.016 typ. 0 8 Figure 14. D2PAK Footprint (dimensions in mm) 16.90 10.30 1.30 5.08 8.90 3.70 In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 8/10 T1635H Series Ordering information 4 Ordering information Part number T1635H-600G T1635H-600G-TR T1635H-600TRG T1635H-600IRG Marking T1635H-600G T1635H-600G T1635H-600T T1635H-600I Package D2PAK D PAK TO-220AB TO-220AB Ins 2 Weight 1.5 g 1.5 g 2.3 g 2.3 g Base Qty 50 1000 50 50 Packing mode Tube Tape and Reel Tube Tube 5 Revision history Date 31-Aug-2006 Revision 1 Initial release Changes 9/10 T1635H Series Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 |
Price & Availability of T1635H-600G
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |