 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) BUL138FP HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR s s s s s s s s STMicroelectronics PREFERRED SALESTYPE NPN TRANSISTOR HIGH VOLTAGE CAPABILITY LOW SPREAD OF DYNAMIC PARAMETERS MINIMUM LOT-TO-LOT SPREAD FOR RELIABLE OPERATION VERY HIGH SWITCHING SPEED FULLY CHARACTERIZED AT 125oC FULLY INSULATED PACKAGE (U.L. COMPLIANT) FOR EASY MOUNTING TO-220FP 3 1 2 APPLICATIONS s ELECTRONIC BALLASTS FOR FLUORESCENT LIGHTING s FLYBACK AND FORWARD SINGLE TRANSISTOR LOW POWER CONVERTERS DESCRIPTION The BUL138FP is manufactured using high voltage Multi Epitaxial Planar technology for high switching speeds and high voltage capability. It uses a Cellular Emitter structure with planar edge termination to enhance switching speeds. The BUL series is designed for use in lighting applications and low cost switch-mode power supplies. INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V CES V CEO V EBO IC I CM IB I BM P tot V isol T stg Tj Parameter Collector-Emitter Voltage (V BE = 0) Collector-Emitter Voltage (I B = 0) Emitter-Base Voltage (I C = 0) Collector Current Collector Peak Current (t p < 5 ms) Base Current Base Peak Current (t p < 5 ms) Total Dissipation at T c = 25 o C Insulation Withstand Voltage (RMS) from All Three Leads to Exernal Heatsink Storage Temperature Max. Operating Junction Temperature Value 800 400 9 5 10 2 4 33 1500 -65 to 150 150 Unit V V V A A A A W V o o C C September 2003 1/6 BUL138FP THERMAL DATA R thj-case R thj-amb Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max Max 3.8 62.5 o o C/W C/W ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) Symbol I CES I CEO Parameter Collector Cut-off Current (V BE = 0) Collector Cut-off Current (I B = 0) Test Conditions V CE = 800 V V CE = 800 V V CE = 400 V I C = 100 mA L = 25 mH 400 T j = 125 o C Min. Typ. Max. 100 500 250 Unit A A A V V CEO(sus) Collector-Emitter Sustaining Voltage (I B = 0) V EBO V CE(sat) Emitter-Base Voltage Collector-Emitter Saturation Voltage I E = 10 mA IC IC IC IC IC = = = = = 1 2 3 4 5 A A A A A IB IB IB IB IB = = = = = 0.2 A 0.4 A 0.6 A 1A 1A 9 0.5 0.7 1 1 0.7 1.1 1.3 1.5 8 10 0.7 50 1 75 40 V V V V V V V V V V BE(sat) Base-Emitter Saturation Voltage DC Current Gain INDUCTIVE LOAD Storage Time Fall Time INDUCTIVE LOAD Storage Time Fall Time IC = 1 A IC = 2 A IC = 3 A IC = 2 A I C = 10 mA IC = 2 A V BE(off) = -5 V V CL = 250 V IC = 2 A V BE(off) = -5V V CL = 250 V T j = 125 o C I B = 0.2 A I B = 0.4 A I B = 0.6 A V CE = 5 V V CE = 5 V I B1 = 0.4 A R BB = 0 L = 200 H I B1 = 0.4 A R BB = 0 L = 200 H h FE ts tf ts tf 1.4 100 s ns s ns Pulsed: Pulse duration = 300 s, duty cycle 1.5 % Safe Operating Areas Derating Curve 2/6 BUL138FP DC Current Gain DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Inductive Fall Time Inductive Storage Time 3/6 BUL138FP Reverse Biased SOA Inductive Load Switching Test Circuit (1) Fast electronic switch (2) Non-inductive Resistor (3) Fast recovery rectifier 4/6 BUL138FP TO-220FP MECHANICAL DATA DIM. MIN. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 O 28.6 9.8 15.9 9 3 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 30.6 10.6 16.4 9.3 3.2 1.126 0.385 0.626 0.354 0.118 mm TYP. MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 A B L3 L6 L7 F1 D H F G1 E F2 123 L2 L4 G 5/6 BUL138FP Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2003 STMicroelectronics - All Rights reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 6/6 |
Price & Availability of BUL138FP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |