View MD1802FH_738444.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MD1802FH
High voltage NPN Power transistor for standard Definition CRT display
Preliminary Data
General features

State-of-the-art technology: - Diffused collector "Enhanced generation" More stable performances versus operating temperature variation Low base-drive requirements Tighter hFE range at operating collector current High ruggedness Fully insulated power package U.L. compliant In compliance with the 2002/93/EC European directive
1 2 3
TO-220FH
Applications

Internal schematic diagram
Horizontal deflection output for TV Switch mode power supplies for CRT TV
Description
The MD1802FH is manufactured using Diffused Collector in Planar Technology adopting new and enhanced high voltage structure. The new MD product series show improved silicon efficiency bringing updated performance to the Horizontal Deflection stage.
Order codes
Part Number MD1802FH Marking MD1802FH Package TO-220FH Packing Tube
August 2006
Rev 1
1/8
www.st.com 8
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
Electrical ratings
MD1802FH
1
Electrical ratings
Table 1.
Symbol VCES VCEO VEBO IC ICM IB PTOT Vins Tstg TJ
Absolute maximum rating
Parameter Collector-emitter voltage (VBE = 0) Collector-emitter voltage (IB = 0) Collector-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Base current Total dissipation at Tc = 25C Insulation withstand voltage (RMS) from all three leads to external heatsink Storage temperature Max. operating junction temperature Value 1500 700 9 10 15 5 40 2500 -65 to 150 C 150 Unit V V V A A A W V
Table 2.
Symbol
Thermal data
Parameter Value 3.125 Unit C/W
Rthj-case Thermal resistance junction-case _______________max
2/8
MD1802FH
Electrical characteristics
2
Electrical characteristics
(Tcase = 25C unless otherwise specified) Table 3.
Symbol ICES IEBO
Electrical characteristics
Parameter Collector cut-off current (VBE =0) Emitter cut-off current (IC =0) Test conditions VCE = 1500V VCE = 1500V; VEB = 9V TC= 125C Min. Typ. Max. 0.2 2 1 Unit mA mA mA
Collector-emitter VCEO(sus) (1) sustaining voltage (IC =0) VCE(sat) (1) VBE(sat) (1) Collector-emitter saturation voltage Base-emitter saturation voltage
IC = 100mA
700
V
IC = 5A IC = 5A IC = 1A
IB = 1.25A IB = 1.25A VCE = 5V VCE = 1V VCE = 5V IB(on) = 500mA 2.4 0.2 5.5 23 5.5
1.5 1.2
V V
hFE
(1)
DC current gain
IC = 5A IC = 5A
8.5
ts tf
Inductive load Storage time Fall time
IC = 4A
VBE(off) = -2.7V fh = 16KHz LBB(off) = 4.5H
s s
1. Pulsed: Pulse duration = 300 ms, duty cycle 1.5 %
3/8
Electrical characteristics
MD1802FH
2.1
Test circuits
Figure 1. Power losses and inductive load switching
Figure 2.
Reverse biased safe operating area
4/8
MD1802FH
Package mechanical data
3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
5/8
Package mechanical data
MD1802FH
TO-220FH (Fully plastic High voltage) MECHANICAL DATA
DIM. MIN. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 L8 L9 15.9 9 14.5 2.4 28.6 9.8 3.4 16.4 9.3 15 0.626 0.354 0.570 0.094 4.4 2.5 2.5 0.45 0.75 1.3 1.3 4.95 2.4 10 16 30.6 10.6 1.126 0.385 0.134 0.645 0.366 0.590 mm TYP. MAX. 4.6 2.7 2.75 0.7 1 1.8 1.8 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.051 0.051 0.195 0.094 0.393 0.630 1.204 0.417 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.070 0.070 0.204 0.106 0.409
P011W
6/8
MD1802FH
Revision history
4
Revision history
Table 4.
Date 02-Aug-2006
Revision history
Revision 1 Initial release. Changes
7/8
MD1802FH
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
8/8

▲Up To Search▲

Price & Availability of MD1802FH

	To Download MD1802FH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .