![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FDD3N40 / FDU3N40 400V N-Channel MOSFET February 2007 FDD3N40 / FDU3N40 400V N-Channel MOSFET Features * 2A, 400V, RDS(on) = 3.4 @VGS = 10 V * Low gate charge ( typical 4.5 nC) * Low Crss ( typical 3.7 pF) * Fast switching * 100% avalanche tested * Improved dv/dt capability UniFET Description TM These N-Channel enhancement mode power field effect transistors are produced using Fairchild's proprietary, planar stripe, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficient switched mode power supplies and active power factor correction. D D G S D-PAK FDD Series I-PAK GDS FDU Series G S Absolute Maximum Ratings Symbol VDSS ID IDM VGSS EAS IAR EAR dv/dt PD TJ, TSTG TL Drain-Source Voltage Drain Current Drain Current Gate-Source voltage Single Pulsed Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Power Dissipation (TC = 25C) - Derate above 25C (Note 2) (Note 1) (Note 1) (Note 3) Parameter - Continuous (TC = 25C) - Continuous (TC = 100C) - Pulsed (Note 1) FDD3N40 / FDU3N40 400 2.0 1.25 8.0 30 46 2 3 4.5 30 0.24 -55 to +150 300 Unit V A A A V mJ A mJ V/ns W W/C C C Operating and Storage Temperature Range Maximum Lead Temperature for Soldering Purpose, 1/8" from Case for 5 Seconds * Drain current limited by maximum junction temperature Thermal Characteristics Symbol RJC RJA Parameter Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink Typ. Typ --- Max 4.2 110 Unit C/W C/W (c)2007 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com FDD3N40 / FDU3N40 Rev. A FDD3N40 / FDU3N40 400V N-Channel MOSFET Package Marking and Ordering Information Device Marking FDD3N40 FDD3N40 FDU3N40 Device FDD3N40TM FDD3N40TF FDU3N40TU Package D-PAK D-PAK I-PAK Reel Size 380mm 380mm - Tape Width 16mm 16mm - Quantity 2500 2000 70 Electrical Characteristics Symbol Off Characteristics BVDSS BVDSS / TJ IDSS IGSSF IGSSR VGS(th) RDS(on) gFS Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd TC = 25C unless otherwise noted Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage Current, Forward Gate-Body Leakage Current, Reverse Conditions VGS = 0V, ID = 250A ID = 250A, Referenced to 25C VDS = 400V, VGS = 0V VDS = 320V, TC = 125C VGS = 30V, VDS = 0V VGS = -30V, VDS = 0V VDS = VGS, ID = 250A VGS = 10V, ID = 1A VDS = 40V, ID = 1A VDS = 25V, VGS = 0V, f = 1.0MHz (Note 4) Min. 400 ------ Typ. -0.4 ----- Max Units --1 10 100 -100 V V/C A A nA nA On Characteristics Gate Threshold Voltage Static Drain-Source On-Resistance Forward Transconductance 3.0 ---2.8 2 5.0 3.4 -V S Dynamic Characteristics Input Capacitance Output Capacitance Reverse Transfer Capacitance ---173 30 3.7 225 40 6 pF pF pF Switching Characteristics Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge VDS = 320V, ID = 3A VGS = 10V (Note 4, 5) (Note 4, 5) VDD = 200V, ID = 3A RG = 25 -------- 10 30 10 25 4.5 1.2 2 30 70 30 60 6 --- ns ns ns ns nC nC nC Drain-Source Diode Characteristics and Maximum Ratings IS ISM VSD trr Qrr NOTES: 1. Repetitive Rating: Pulse width limited by maximum junction temperature 2. L = 20mH, IAS = 2A, VDD = 50V, RG = 25, Starting TJ = 25C 3. ISD 2A, di/dt 200A/s, VDD BVDSS, Starting TJ = 25C 4. Pulse Test: Pulse width 300s, Duty Cycle 2% 5. Essentially Independent of Operating Temperature Typical Characteristics Maximum Continuous Drain-Source Diode Forward Current Maximum Pulsed Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge VGS = 0V, IS = 2A VGS = 0V, IS = 3A dIF/dt =100A/s (Note 4) ------ ---210 0.75 2 8 1.4 --- A A V ns C 2 FDD3N40 / FDU3N40 Rev. A www.fairchildsemi.com FDD3N40 / FDU3N40 400V N-Channel MOSFET Typical Performance Characteristics Figure 1. On-Region Characteristics 10 1 Figure 2. Transfer Characteristics 10 1 ID, Drain Current [A] 10 0 ID, Drain Current [A] VGS 15.0 V 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V Bottom : 5.5 V Top : 150 C 25 C -55 C * Notes : 1. VDS = 40V 2. 250s Pulse Test o o o 10 -1 * Notes : 1. 250s Pulse Test 2. TC = 25 C o -2 10 10 -1 10 0 10 1 10 0 4 5 6 7 8 9 10 VDS, Drain-Source Voltage [V] VGS, Gate-Source Voltage [V] Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperatue 15 RDS(ON) [], Drain-Source On-Resistance 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 * Note : TJ = 25 C o IDR, Reverse Drain Current [A] 10 1 VGS = 10V 10 0 VGS = 20V 150oC 25 C o * Notes : 1. VGS = 0V 2. 250s Pulse Test 5 6 10 -1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 ID, Drain Current [A] VSD, Source-Drain voltage [V] Figure 5. Capacitance Characteristics 350 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd Figure 6. Gate Charge Characteristics 12 300 Coss 250 VGS, Gate-Source Voltage [V] 10 VDS = 80V VDS = 200V Capacitances [pF] Ciss 200 8 VDS = 320V 6 150 100 Crss 50 * Note : 1. VGS = 0 V 2. f = 1 MHz 4 2 * Note : ID = 3A 0 -1 10 10 0 10 1 0 0 1 2 3 4 5 VDS, Drain-Source Voltage [V] QG, Total Gate Charge [nC] 3 FDD3N40 / FDU3N40 Rev. A www.fairchildsemi.com FDD3N40 / FDU3N40 400V N-Channel MOSFET Typical Performance Characteristics (Continued) Figure 7. Breakdown Voltage Variation vs. Temperature 1.2 Figure 8. On-Resistance Variation vs. Temperature 3.0 BVDSS, (Normalized) Drain-Source Breakdown Voltage 1.1 RDS(ON), (Normalized) Drain-Source On-Resistance 2.5 2.0 1.0 1.5 1.0 0.9 * Notes : 1. VGS = 0 V 2. ID = 250A 0.5 * Notes : 1. VGS = 10 V 2. ID = 1 A 0.8 -100 -50 0 50 100 o 150 200 0.0 -100 -50 0 50 100 o 150 200 TJ, Junction Temperature [ C] TJ, Junction Temperature [ C] Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current vs. Case Temperature 2.5 10 1 10 s 100 s 1 ms 2.0 ID, Drain Current [A] ID, Drain Current [A] 10 0 10 ms Operation in This Area is Limited by R DS(on) 1.5 100 ms DC * Notes : 1. TC = 25 C 2. TJ = 150 C 3. Single Pulse o o 1.0 10 -1 0.5 10 -2 10 0 10 1 10 2 0.0 25 50 75 100 o 125 150 VDS, Drain-Source Voltage [V] TC, Case Temperature [ C] Figure 11. Transient Thermal Response Curve ZJC(t), Thermal Response D = 0 .5 0 10 0 .2 0 .1 0 .0 5 0 .0 2 PDM t1 t2 * N o te s : 1 . Z J C ( t) = 4 .2 C /W M a x . 2 . D u ty F a c to r , D = t 1 /t 2 3 . T J M - T C = P D M * Z J C ( t) o 10 -1 0 .0 1 s in g le p u ls e 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 t 1 , S q u a r e W a v e P u ls e D u r a tio n [s e c ] 4 FDD3N40 / FDU3N40 Rev. A www.fairchildsemi.com FDD3N40 / FDU3N40 400V N-Channel MOSFET Gate Charge Test Circuit & Waveform Resistive Switching Test Circuit & Waveforms Unclamped Inductive Switching Test Circuit & Waveforms 5 FDD3N40 / FDU3N40 Rev. A www.fairchildsemi.com FDD3N40 / FDU3N40 400V N-Channel MOSFET Peak Diode Recovery dv/dt Test Circuit & Waveforms 6 FDD3N40 / FDU3N40 Rev. A www.fairchildsemi.com FDD3N40 / FDU3N40 400V N-Channel MOSFET Mechanical Dimensions D-PAK 7 FDD3N40 / FDU3N40 Rev. A www.fairchildsemi.com FDD3N40 / FDU3N40 400V N-Channel MOSFET Mechanical Dimensions I-PAK 8 FDD3N40 / FDU3N40 Rev. A www.fairchildsemi.com TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.TM ActiveArrayTM BottomlessTM Build it NowTM CoolFETTM CROSSVOLTTM CTLTM Current Transfer LogicTM DOMETM 2 E CMOSTM (R) EcoSPARK EnSignaTM FACT Quiet SeriesTM (R) FACT (R) FAST FASTrTM FPSTM (R) FRFET GlobalOptoisolatorTM GTOTM (R) HiSeCTM i-LoTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM MICROCOUPLERTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM (R) OPTOLOGIC (R) OPTOPLANAR PACMANTM POPTM (R) Power220 (R) Power247 PowerEdgeTM PowerSaverTM PowerTrench Programmable Active DroopTM (R) QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM ScalarPumpTM SMART STARTTM (R) SPM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TCMTM (R) The Power Franchise TM (R) TinyLogic TINYOPTOTM TinyPowerTM TinyWireTM TruTranslationTM SerDesTM (R) UHC UniFETTM VCXTM WireTM (R) TinyBoostTM TinyBuckTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I23 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. No Identification Needed Full Production Obsolete Not In Production (c) 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com |
Price & Availability of FDU3N40
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |