![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Features Auto-sense Non-Isolation Synchronous rectification design Adjustable Output voltage 2, 3, 4 & 5AMP Adjustable Positive Step Down Integrated Switching Regulator Over load protection (125% full load typical) Remote ON/OFF Control(Ground Off) Wide Input Range Continuous short circuit protection (Very low short input current: Iin<50mA) Input voltage range 4.5V~18V Efficiency to 96% INNOLINE DC/DC-Converter R-5xxxPA _DA Series Selection Guide Part Number SIP12 R-521.2xA R-521.8xA R-522.5xA R-523.3xA R-525.0xA R-531.2xA R-531.8xA R-532.5xA R-533.3xA R-535.0xA R-541.2xA R-541.8xA R-542.5xA R-543.3xA R-545.0xA R-551.2xA R-551.8xA R-552.5xA R-553.3xA R-555.0xA Inpu Range (V) 4.5 - 18 4.5 - 18 4.5 - 18 4.5 - 18 6.5 - 18 4.5 - 18 4.5 - 18 4.5 - 18 4.5 - 18 6.5 - 18 4.5 - 18 4.5 - 18 4.5 - 18 4.5 - 18 6.5 - 18 4.5 - 18 4.5 - 18 4.5 - 18 4.5 - 18 7.0 - 18 Nominal Vout Output Current (A) 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 5 5 5 5 5 Efficiency (%) min Vin 83 88 91 92 95 85 89 92 94 96 82 87 91 93 95 81 86 90 92 94 12V 79 85 88 90 93 84 88 91 93 95 81 86 89 92 94 80 85 89 91 93 max Vin 75 82 86 89 92 82 86 89 92 94 79 85 88 91 93 78 84 88 90 92 Output Voltage Adjust Range (V) (V) 1.2 1.8 2.5 3.3 5.0 1.2 1.8 2.5 3.3 5.0 1.2 1.8 2.5 3.3 5.0 1.2 1.8 2.5 3.3 5.0 1.0 - 3.0 1.1 - 4.5 1.6 - 5.5 1.6 - 5.5 3.0 - 5.5 1.0 - 3.0 1.1 - 4.5 1.6 - 5.5 1.6 - 5.5 3.0 - 5.5 1.0 - 3.0 1.1 - 4.5 1.6 - 5.5 1.6 - 5.5 3.0 - 5.5 1.0 - 3.0 1.1 - 4.5 1.6 - 5.5 1.6 - 5.5 3.0 - 5.5 2, 3, 4, 5 AMP SIP12 Vertical & Horizontal Note: Vin -Vout 1.5V if adjust function is used! Suffix x: (see mechanical drawing for details) x = P pins vertical through hole x = D pins bent for horizontal through hole mounting Description The R-5XXX series is a high performance 1.2V to 5.0V , 2Amp to 5Amp,12-Pin SIP (single in-line package) integrated switching regulator (ISR). Synchronuous - rectified design yields excellent efficiencies up to 96%.Short circuit protection with crowbar function to reduce the short current under 50mA of input current. Autosense function compensates for any losses in long circuit loops. 128 24-August-2005 www.recom-international.com INNOLINE DC/DC-Converter Specifications (refer to the standard application circuit, Ta: 25C) Characteristics Output Voltage Range Output Current Conditions All Series R-52xxPA/DA R-53xxPA/DA R-54xxPA/DA R-55xxPA/DA R-52xxPA/DA R-53xxPA/DA R-54xxPA/DA R-55xxPA/DA All Series At 100% Load All Series R-5xxxPA_DA Series Min. 0.8 0.2 0.3 0.4 0.5 2.5 3.75 5.0 6.0 1% 0.25 0.5 0.5 1.0 40mVp-p 80mVp-p 100S 4.5 Typ. Max. 6.0V 2.0A 3.0A 4.0A 5.0A 3.0A 4.25A 5.5A 6.5A 50mA 2% 0.5% 1.0% 1.0% 2.0% 70mVp-p 120mVp-p 200s 100mV 18V 0.8V 100A 300 330kHz 20mA -40C -40C Io x Vo x (1-Efficiency) Tamb. = +25C Tamb. = +85C +85C +125C 1.4W 749kHrs 150kHrs Output Current Limit Short Circuit Input Current Output Voltage Accuracy Line Voltage Regulation (Vin = min. to max. at full load) Load Regulation (10 to 100% full load) Ripple & Noise Transient Response (see note 1) Remote ON / OFF (see note 2) (positive logic) Remote Off Input Current Switching Frequency Quiescent Current Operating Temperature Range Storage Temperature Range Internal Power Dissipation MTBF (Nominal Vout, 100% load) R-52xxPA/DA R-53xxPA/DA & R-54xxPA/DA & R-55xxPA/DA R-52xxPA/DA R-53xxPA/DA & R-54xxPA/DA & R-55xxPA/DA R-52xxPA/DA R-53xxPA/DA & R-54xxPA/DA & R-55xxPA/DA 50% Load Change Vout Over / Undershoot Open or High (Power ON) Low (Power OFF) Remote ON/OFF low level Vin = min. to max. at 0% load 270 Notes: 1. Requires an electrolytic or tantalum output capacitor for proper operation in all applications (the capacitor to be placed as close as possible to the output pins) 100F for R-52xxPA/DA, R-53xxPA/DA and R-54xxPA/DA or 220F for R-55xxPA/DA. 2. ON / OFF pin driven by TTL (logic gate), open-collector bipolar transistor or open-drain MOSFET. 3. Output Current vs. Input Voltage (see graph below). www.recom-international.com 24-August-2005 129 INNOLINE DC/DC-Converter Standard Application Circuit R-5xxxPA_DA Series 11 Vin TTL OFF ON Com 1F (Optional) 2, 3, 4 C1 1 R-52XX R-53XX R-54XX R-55XX 5, 6, 7,8 (Adjust down) R1 9, 10 Vout C2 (Req'd) 12 (Adjust up) Q1 R2 100F/10V or 220F/10V (see Note 1) Com Parallel Application Circuit The R-52xx, R-53xx, R-54xx series can be used in parallel to upgrade the output current capacity for the same output voltage. For example, the R-543.3PA can parallel up with another R-554.3PA to give up to 8 amps or with the R-533.3PA or R-523.3PA types to give output currents of up to 7 Amps or 6 Amps. The R-55xx series cannot be paralleled. Vin ON/OFF Control Com C2-2 100F/10V (REQD) Q1 C1 100F/25V (REQD) 1 2 3 4 U1 5 6 7 12 11 10 89 C2-1 100F/10V (REQD) Vout Com 4 3 2 1 5 6 7 8 U2 9 10 11 12 must be connected together Component side Solder side Com +Vin 12 C1 1 U1 C2-1 1 12 U1 1 Keep 2mm to 5mm distance between both converters 12 U2 12 C2-2 +Vout Sense Com 1 U2 To Load 130 24-August-2005 www.recom-international.com INNOLINE DC/DC-Converter Output Current vs Input Voltage R-5xxxPA_DA Series How to calculating the max output current The internal power dissipation(PD)follows the equation: PD = Io x Vo x (1-) Io = PD / Vo x (1-) Where PD = Internal power dissipation Io = Output current Vo = Output voltage = Efficiency Example: R-545.0P , at Vin = 18Vdc , Vo = 5Vdc ,=93% (see table 1) (a) When Ta = 60C , PD = 1.4 Watt (see fig-1) Io = 1.4(W) / 5(V) x (1-0.93) = 4(A) (b) When Ta = 85C , PD = 1 Watt (see fig-1) Io = 1(W) / 5(V) x (1-0.93) = 2.857(A) (c) At Vin = 12Vdc efficiency = 94% (see table 1) When Ta = 85C , PD = 1 Watt (see fig-1) Io = 1(W) / 5(V) x (1-0.94) =3.33(A) Ambient Temperature (C) 90 85 80 60 40 20 0 0.5 1 1.4 Internal Power Dissipation (W) Characteristics R-53xx / R-54xx Output Voltage Line Regulation VS Vout 1 R-52xx / R-55xx Output Voltage Line Regulation VS Vout 1 Line Regulation (%) Line Regulation (%) 0 1.8 1.2 Output Voltage (V) 2.3 3.3 5.0 0.5 0.5 0 1.8 1.2 Output Voltage (V) 2.3 3.3 5.0 R-53xx / R-54xx Intput Voltage Load Regulation VS Vin 2.0 1.5 1.2V 1.8V 2.5V 3.3V 5.0V R-52xx / R-55xx Intput Voltage Load Regulation VS Vin 2.0 1.5 Load Regulation (%) 1.0 0.5 Load Regulation (%) 1.0 0.5 1.2V 1.8V 2.5V 3.3V 5.0V 0 0 5 Input Voltage (V) 10 15 20 5 Input Voltage (V) 10 15 20 www.recom-international.com 24-August-2005 131 INNOLINE DC/DC-Converter Characteristics R-53xx / R-54xx / R-55xx Output Current Efficiency vs Iout (Vin = Min) 100 5.0V 90 3.3V 2.5V 1.8V 90 R-5xxxPA_DA Series R-52xx Output Current Efficiency vs Iout (Vin = Min) 100 5.0V 3.3V 2.5V 1.8V 1.2V Efficiency (%) 80 Efficiency (%) 1.2V 80 70 1 2 Output Current (A) 3 4 5 70 0.5 1.0 Output Current (A) 1.5 2.0 R-53xx / R-54xx / R-55xx Output Current Efficiency vs Iout (Vin = 18V) 100 5.0V 3.3V 2.5V R-52xx Output Current Efficiency VS Iout (Vin = 18V) 100 90 80 70 5.0V 3.3V 2.5V 1.8V 1.2V 90 Efficiency (%) 80 Efficiency (%) 1.8V 1.2V 60 50 40 0.5 1.0 Output Current (A) 1.5 2.0 70 1 2 Output Current (A) 3 4 5 Package Style and Pinning (mm) SIP12 PIN Package 3rd angle projection 9.1 32.20 9.1 32.20 15.00 RECOM R - 5 2 1 . 2 PA 1 2 3 4 5 6 7 8 9 10 11 12 15.00 RECOM R-521.2DA 1 2 3 4 5 6 7 8 9 10 11 12 0.2 4.0 2.13 0.7 2.54 0.2 2.13 0.7 2.54 Bottom View Bottom View 0.7 4.0 0.7 Pin Connections Pin # 1 2, 3, 4 5, 6, 7, 8 9 , 10 11 12 Tolerance: 0.25 mm Name ON / OFF Vin GND Vout Vout (Auto Sense) Vout-Adj Description Input pin : Active low (less than 0.8V) to disable the device Power input Input and output ground (common) Power output If unused this pin must be connected to Pin 9 and 10 With external resistors R1,R2 to selected output voltage 132 24-August-2005 www.recom-international.com INNOLINE DC/DC-Converter Table 1: Adjustment Resistor Values 2Adc 3Adc 4Adc 5Adc Vout (nominal) Vout (adj) 0.8 (V) 0.9 (V) 1.0 (V) 1.1 (V) 1.2 (V) 1.3 (V) 1.5 (V) 1.6 (V) 1.7 (V) 1.8 (V) 1.9 (V) 2.0 (V) 2.4 (V) 2.5 (V) 2.6 (V) 3.0 (V) 3.2 (V) 3.3 (V) 3.4 (V) 3.6 (V) 3.9 (V) 4.5 (V) 4.9 (V) 5.0 (V) 5.1 (V) 5.5 (V) 37K 11.5K 8.2K 6.5K 5.2K 4.3K 3.6K 2.1K 1.8K 1.65K 1.05K 36K 1.8K 5.2K 4.3K 3.6K 2.1K 1.65K 1.5K 1.35K 1.07K 780 390 740 3.9K 13K 1.05K 2.1K 3.7K 10K 18K 41K 270 750 2.1K 3.0K 4.1K 5.6K 7.5K 10.5K 82K R1 R-521.2PA/DA R-531.2PA/DA R-541.2PA/DA R-551.2PA/DA 1.2Vdc R2 R1 R-521.8PA/DA R-531.8PA/DA R-541.8PA/DA R-551.8PA/DA 1.8Vdc R2 R1 R-5xxxPA_DA Series R-522.5PA/DA R-532.5PA/DA R-542.5PA/DA R-552.5PA/DA 2.5Vdc R2 R1 R-523.3PA/DA R-533.3PA/DA R-543.3PA/DA R-553.3PA/DA 3.3Vdc R2 R1 R-525.0PA/DA R-535.0PA/DA R-545.0PA/DA R-555.0PA/DA 5.0Vdc R2 390 750 1.2K 1.7K 2.2K 2.8K 6.8K 8.5K 33K 6.2K 4.1K 3.4K 2.9K 2.2K 1.4K 650 350 290 220 39 36K 11K 4.7K 1.6K 820 680 560 190 28K 2.6K 10.5K 33K 110K 470 1.6K 2.2K 3.0K 4.7K 8.5K 30K 220K www.recom-international.com 24-August-2005 133 |
Price & Availability of R-5218PA
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |