 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Compact Head-on PMT Photosensor Modules H7827 Series The H7827 series photosensor modules incorporate a 19-mm (3/4") diameter head-on photomultiplier tube, a high-voltage power supply circuit and a low noise amplifier. Two types of amplifiers are available with a current-to-voltage conversion factor of 1 V/A or 0.1 V/A and a frequency bandwidth of DC to 20 kHz or DC to 200 kHz. Two types of photomultiplier tubes with different spectral response characteristics are provided for measurement in the visible range or visible to near IR range. Product Variations Type No. H7827-001 H7827-011 H7827-002 H7827-012 Spectral Response Current-to-Voltage Conversion Factor Frequency Bandwidth 300 nm to 650 nm 1 V/A DC to 20 kHz 300 nm to 850 nm 300 nm to 650 nm 0.1 V/A DC to 200 kHz 300 nm to 850 nm Features For general applications in visible range For visible to near IR range For general applications in visible range For visible to near IR range Specifications Parameter Suffix Input Voltage Max. Input Voltage Max. Input Current Max. Control Voltage Recommended Control Voltage Adjustment Range Effective Area Sensitivity Adjustment Range Peak Sensitivity Wavelength Min. Luminous Sensitivity Typ. Blue Sensitivity Index (CS 5-58) Red/White Ratio Radiant Sensitivity *1 Suffix (with internal 20 kHz amp) Min. Luminous Sensitivity *2 Typ. Radiant Sensitivity *1 *2 Voltage Output Depending Typ. on PMT Dark Current *2 *3 Max. Max. Output Signal Voltage Current-to-Voltage Conversion Factor Suffix (with internal 200 kHz amp) Min. Luminous Sensitivity *2 Typ. Radiant Sensitivity *1 *2 Voltage Output Depending Typ. on PMT Dark Current *2 *3 Max. Max. Output Signal Voltage Current-to-Voltage Conversion Factor Cathode Anode Anode Offset Voltage *2 Typ. Ripple Noise *2 *4 (peak to peak) Max. Settling Time *5 Operating Ambient Temperature Storage Temperature Weight H7827 Series -001 / -002 -011 / -012 11.5 to 15.5 18 +40/-1 +1.2 (Input Impedance 100 k) +0.5 to +1.1 15 1: 103 420 60 90 10.5 -- 85 -001 1.0 x 107 5.0 x 107 47 3 20 +10 (Load resistance 10 k) 1 -002 1.0 x 106 5.0 x 106 4.7 0.3 2 +10 (Load resistance 10 k) 0.1 H7827 series 3 4 0.2 +5 to +45 -20 to +50 80 -012 1.0 x 106 3.0 x 106 1.3 0.3 2 380 80 120 -- 0.2 49 -011 1.0 x 107 3.0 x 107 13 3 20 Unit -- V V mA V V mm -- nm A/lm -- -- mA/W V/lm V/nW mV V V/A V/lm V/nW mV V V/A mV mV s C C g *1: Measured at the peak sensitivity wavelength *2: Control voltage = +1.0 V *3: After 30 minute storage in darkness *4: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 M, Load capacitance = 22 pF *5: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. 34 Voltage Output Type Photosensor Modules Characteristics (Anode radiant sensitivity, PMT gain) H7827-001 -011 10 TPMOB0156EA PMT GAIN: 105 1 -011 -012 H7827-002 -012 108 TPMOB0159EA ANODE RADIANT SENSITIVITY (V/nW) ANODE RADIANT SENSITIVITY (V/nW) 107 1 0.1 106 -001 -002 PMT GAIN -001 -002 105 0.1 0.01 104 -011 -012 103 0.01 100 200 300 400 500 600 700 800 0.001 900 102 0.25 0.3 0.4 0.5 0.7 1.0 1.2 1.5 2.0 WAVELENGTH (nm) CONTROL VOLTAGE (V) Sensitivity Adjustment Method VOLTAGE PROGRAMMING PHOTOSENSOR MODULE COAXIAL CABLE RED (LOW VOLTAGE INPUT) GREEN (LOW VOLTAGE INPUT) BLACK (GND) BLUE (Vref OUTPUT) WHITE (Vcontrol INPUT) POWER SUPPLY SIGNAL OUTPUT RESISTANCE PROGRAMMING PHOTOSENSOR MODULE SIGNAL OUTPUT POWER SUPPLY +15 V -15 V GND +15 V -15 V GND COAXIAL CABLE RED (LOW VOLTAGE INPUT) GREEN (LOW VOLTAGE INPUT) BLACK (GND) BLUE (Vref OUTPUT) WHITE (Vcontrol INPUT) CW * Adjust the control voltage to adjust the sensitivity. * Electrically insulate the reference voltage output. +0.5 V to +1.1 V GND MONITOR POTENTIOMETER (10 k) When using a potentiometer, adjust sensitivity while monitoring the control voltage. TPMOC0166EB Dimensional Outlines (Unit: mm) 26.0 +0.5 -0 13.0 0.5 EFFECTIVE AREA 15 Min. 0 +0.1 -0.3 56.0 +0.5 -0 SIGNAL OUTPUT BNC-R 19.0 0.5 18.0 0.5 POWER INPUT HIROSE HR10A-7R-6P 1: GND 2: Vcc +15 V 3: Vcont +0.5 V to +1.1 V 4: Vref 5: NC 6: Vee -15 V 50.0 +1.0 -0 14.0 0.5 18 4-M2 DEPTH: 5 10.0 0.5 FRONT VIEW 16.0 0.5 SIDE VIEW 25.0 0.5 18.6 0.7 2-M3 DEPTH: 5 REAR VIEW Power cable with connector (HIROSE HR10A-7P-6S) is supplied with the H7827 series BLACK: RED: WHITE: BLUE: GREEN: GND LOW VOLTAGE INPUT (+15 V) Vcont INPUT (+0.5 V to +1.1 V) Vref OUTPUT (+1.2 V) LOW VOLTAGE INPUT (-15 V) 700 20 TPMOA0023EB 35 |
Price & Availability of H7827-001
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |