 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD - 9.1129 IRGPC20K INSULATED GATE BIPOLAR TRANSISTOR Features * Short circuit rated - 10s @ 125C, VGE = 15V * Switching-loss rating includes all "tail" losses * Optimized for high operating frequency (over 5kHz) See Fig. 1 for Current vs. Frequency curve C Short Circuit Rated UltraFast IGBT VCES = 600V G E VCE(sat) 3.5V @VGE = 15V, IC = 6.0A n-channel Description Insulated Gate Bipolar Transistors (IGBTs) from International Rectifier have higher usable current densities than comparable bipolar transistors, while at the same time having simpler gate-drive requirements of the familiar power MOSFET. They provide substantial benefits to a host of high-voltage, high-current applications. These new short circuit rated devices are especially suited for motor control and other applications requiring short circuit withstand capability. TO -2 4 7 AC Absolute Maximum Ratings Parameter VCES IC @ TC = 25C IC @ TC = 100C I CM ILM tsc VGE EARV PD @ T C = 25C PD @ TC = 100C TJ TSTG Collector-to-Emitter Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Clamped Inductive Load Current Short Circuit Withstand Time Gate-to-Emitter Voltage Reverse Voltage Avalanche Energy Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 sec. Mounting torque, 6-32 or M3 screw. Max. 600 10 6.0 20 20 10 20 5.0 60 24 -55 to +150 300 (0.063 in. (1.6mm) from case) 10 lbf*in (1.1N*m) Units V A s V mJ W C Thermal Resistance Parameter RJC RCS RJA Wt Junction-to-Case Case-to-Sink, flat, greased surface Junction-to-Ambient, typical socket mount Weight Min. -- -- -- -- Typ. -- 0.24 -- 6 (0.21) Max. 2.1 -- 40 -- Units C/W g (oz) IRGPC20K Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter Min. Typ. Max. Units Conditions Collector-to-Emitter Breakdown Voltage 600 -- -- V V GE = 0V, IC = 250A Emitter-to-Collector Breakdown Voltage 20 -- -- V VGE = 0V, IC = 1.0A V (BR)CES/T J Temperature Coeff. of Breakdown Voltage-- 0.37 -- V/C VGE = 0V, IC = 1.0mA Collector-to-Emitter Saturation Voltage -- 2.4 3.5 IC = 6.0A V GE = 15V VCE(on) -- 3.6 -- V IC = 10A See Fig. 2, 5 -- 2.9 -- IC = 6.0A, TJ = 150C VGE(th) Gate Threshold Voltage 3.0 -- 5.5 VCE = VGE, IC = 250A -11 -- mV/C VCE = VGE, IC = 250A V GE(th)/T J Temperature Coeff. of Threshold Voltage -- Forward Transconductance 1.9 3.3 -- S VCE = 100V, IC = 6.0A gfe ICES Zero Gate Voltage Collector Current -- -- 250 A VGE = 0V, VCE = 600V -- -- 1000 VGE = 0V, VCE = 600V, TJ = 150C IGES Gate-to-Emitter Leakage Current -- -- 100 nA VGE = 20V V(BR)CES V(BR)ECS Switching Characteristics @ TJ = 25C (unless otherwise specified) Qg Qge Q gc t d(on) tr t d(off) tf Eon Eoff Ets tsc t d(on) tr t d(off) tf Ets LE Cies Coes Cres Notes: Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Short Circuit Withstand Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Internal Emitter Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. -- -- -- -- -- -- -- -- -- -- 10 -- -- -- -- -- -- -- -- -- Typ. Max. Units Conditions 17 26 IC = 6.0A 4.3 6.8 nC VCC = 400V See Fig. 8 6.4 11 V GE = 15V 29 -- TJ = 25C 18 -- ns IC = 6.0A, VCC = 480V 58 90 VGE = 15V, RG = 50 120 200 Energy losses include "tail" 0.11 -- 0.13 -- mJ See Fig. 9, 10, 11, 14 0.24 0.31 -- -- s VCC = 400V, TJ = 125C VGE = 15V, RG = 50, VCPK < 500V 28 -- TJ = 150C, 22 -- ns IC = 6.0A, VCC = 480V 200 -- VGE = 15V, RG = 50 145 -- Energy losses include "tail" 0.50 -- mJ See Fig. 10, 14 13 -- nH Measured 5mm from package 360 -- VGE = 0V 45 -- pF VCC = 30V See Fig. 7 4.7 -- = 1.0MHz Repetitive rating; V GE=20V, pulse width limited by max. junction temperature. ( See fig. 13b ) Repetitive rating; pulse width limited by maximum juntion temperature. Pulse width 5.0s, single shot. VCC=80%(VCES), VGE=20V, L=10H, R G= 50, ( See fig. 13a ) Pulse width 80s; duty factor 0.1%. IRGPC20K 16 For both: Triangular wave: 12 Load Current (A) Duty cycle: 50% T = 125C J Tsink = 90C Gate drive as specified Power Dissipation = 15W Clamp voltage: 80% of rated Square wave: 8 60% of rated voltage 4 Ideal diodes 0 0.1 A 1 10 100 f, Frequency (kHz) Fig. 1 - Typical Load Current vs. Frequency (For square wave, I=IRMS of fundamental; for triangular wave, I=IPK ) 100 100 I C , Collector-to-Emitter Current (A) TJ = 25C 10 TJ = 150C IC , Collector-to-Emitter Current (A) 10 TJ = 150C 1 TJ = 25C 0.1 0.1 VGE = 15V 20s PULSE WIDTH 1 10 1 5 10 VCC = 100V 5s PULSE WIDTH 15 20 VCE , Collector-to-Emitter Voltage (V) VGE , Gate-to-Emitter Voltage (V) Fig. 2 - Typical Output Characteristics Fig. 3 - Typical Transfer Characteristics IRGPC20K 10 8 VCE , Collector-to-Emitter Voltage (V) VGE = 15V 5.0 Maximum DC Collector Current (A) VGE = 15V 80s PULSE WIDTH 4.0 IC = 12A 6 3.0 4 IC = 6.0A 2.0 2 I C = 3.0A 0 25 50 75 100 125 150 1.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 T C , Case Temperature (C) TC , Case Temperature (C) Fig. 4 - Maximum Collector Current vs. Case Temperature Fig. 5 - Collector-to-Emitter Voltage vs. Case Temperature 10 Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.05 P DM 0.1 0.02 0.01 t SINGLE PULSE (THERMAL RESPONSE) Notes: 1. Duty factor D = t 1 /t 2 1 t2 0.01 0.00001 2. Peak TJ = PDM x Z thJC + T C 0.0001 0.001 0.01 0.1 1 10 t 1 , Rectangular Pulse Duration (sec) Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case IRGPC20K 700 600 C, Capacitance (pF) 500 Cies C oes 400 300 VGE , Gate-to-Emitter Voltage (V) 100 V GE = 0V, f = 1MHz Cies = Cge + C gc , Cce SHORTED Cres = C gc Coes = Cce + C gc 20 VCE = 480V I C = 6.0A 16 12 8 200 Cres 100 4 0 1 10 0 0 4 8 12 16 20 V CE , Collector-to-Emitter Voltage (V) Q g , Total Gate Charge (nC) Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage 0.26 Total Switching Losses (mJ) 0.25 Total Switching Losses (mJ) VCC = 480V VGE = 15V TC = 25C I C = 6.0A 10 RG = 50 VGE = 15V VCC = 480V I C = 12A 0.24 1 I C = 6.0A I C = 3.0A 0.1 0.23 0.22 0.21 0.20 0 10 20 30 40 50 60 0.01 -60 A -40 -20 0 20 40 60 80 100 120 140 160 R G , Gate Resistance () TC, Case Temperature (C) W Fig. 9 - Typical Switching Losses vs. Gate Resistance Fig. 10 - Typical Switching Losses vs. Case Temperature IRGPC20K 1.4 Total Switching Losses (mJ) 1.2 1.0 I C , Collector-to-Emitter Current (A) RG = 50 T C = 150C V CC = 480V V GE = 15V 100 VGE = 20V GE TJ = 125C 10 SAFE OPERATING AREA 0.8 0.6 1 0.4 0.2 0.0 0 2 4 6 8 10 12 A 14 0.1 1 10 100 1000 I C , Collector-to-Emitter Current (A) VCE , Collector-to-Emitter Voltage (V) Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current Fig. 12 - Turn-Off SOA 15.90 ( .626) 15.30 ( .602) -B- 3.65 (.143) 3.55 (.140) 0.25 (.010) M D B M -A5.50 (.217) -D- 5.30 ( .209) 4.70 ( .185) 2.50 (.089) 1.50 (.059) 4 NO TES: 1 DIMENSIO NS & T OLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION : INCH. 3 DIMENSIO NS ARE SHOW N MILLIMETE RS (INCHES). 4 CONFO RM S TO JEDEC OUTLINE T O-247AC. 20.30 (.800) 19.70 (.775) 1 2X 5.50 (.217) 4.50 (.177) 2 3 -C- LEAD ASSIGNMENT S 1 - GAT E 2 - CO LLECTO R 3 - EMIT TER 4 - CO LLECTO R * 14.80 (.583) 14.20 (.559) 2.40 (.094) 2.00 (.079) 2X 4.30 (.170) 3.70 (.145) 1.40 (.056) 3X 1.00 (.039) 0.25 ( .010) M 3.40 (.133) 3.00 (.118) 0.80 ( .031) 3X 0.40 ( .016) 2.60 (.102) 2.20 (.087) * LO NGE R LEADED (20m m) VERS ION AVAILAB LE (TO-247AD) TO ORDE R ADD "-E " SUFF IX TO PART NUMBER 5.45 (.215) 2X CA S CONFORMS TO JEDEC OUTLINE TO-247AC (TO-3P) Dimensions in Millimeters and (Inches) IRGPC20K L 50V 1000V VC * 0480V D.U.T. RL 8 = 4 4 0XV IC@25C 480F 960V Q R * Driver same type as D.U.T.; Vc = 80% of Vce(max) * Note: Due to the 50V power supply, pulse width and inductor will increase to obtain rated Id. Fig. 13a - Clamped Inductive Load Test Circuit Fig. 13b - Pulsed Collector Current Test Circuit IC L Driver* 50V D.U.T. VC Fig. 14a - Switching Loss Test Circuit * Driver same type as D.U.T., VC = 480V Q 1000V R S Q R 90% S VC 90% 10% Fig. 14b - Switching Loss Waveforms t d(off) 10% I C 5% t d(on) tr Eon Ets = (Eon +Eoff ) tf t=5s Eoff |
Price & Availability of 1966
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |