Part Number Hot Search : 
IRFU7740 R1112N MAX8873R 21740 D128EI 64V42 MDS731 B25667
Product Description
Full Text Search
 

To Download 1981490 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 QSE DATA SHEET ERRATA Released
PM73488
QSE
DATA SHEET Errata
Released Issue 6: Feb. , 2002
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981032, Issue 7
QRT DATA SHEET ERRATA Released
Legal Information
Copyright
(c) 2002 PMC-Sierra, Inc. The information is proprietary and confidential to PMC-Sierra, Inc., and for its customers' internal use. In any event, you cannot reproduce any part of this document, in any form, without the express written consent of PMC-Sierra, Inc. PMC-1980616 (P3)
Disclaimer
None of the information contained in this document constitutes an express or implied warranty by PMC-Sierra, Inc. as to the sufficiency, fitness or suitability for a particular purpose of any such information or the fitness, or suitability for a particular purpose, merchantability, performance, compatibility with other parts or systems, of any of the products of PMC-Sierra, Inc., or any portion thereof, referred to in this document. PMC-Sierra, Inc. expressly disclaims all representations and warranties of any kind regarding the contents or use of the information, including, but not limited to, express and implied warranties of accuracy, completeness, merchantability, fitness for a particular use, or non-infringement. In no event will PMC-Sierra, Inc. be liable for any direct, indirect, special, incidental or consequential damages, including, but not limited to, lost profits, lost business or lost data resulting from any use of or reliance upon the information, whether or not PMC-Sierra, Inc. has been advised of the possibility of such damage.
Trademarks
QRT is a registered trademark of PMC-Sierra, Inc. PMC-Sierra is trademark of PMC-Sierra, Inc. Other product and company names mentioned herein may be the trademarks of their respective owners.
Patents
The technology discussed is protected by one or more of the following Patents: U.S. Patent No. 5,557,607; 5,570,348; 5,583,861; 6,151,301; 6,188,690B1 Relevant patent applications and other patents may also exist.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
2
QRT DATA SHEET ERRATA Released
Contacting PMC-Sierra
PMC-Sierra 8555 Baxter Place Burnaby, BC Canada V5A 4V7 Tel: (604) 415-6000 Fax: (604) 415-6200 Document Information: document@pmc-sierra.com Corporate Information: info@pmc-sierra.com Technical Support: apps@pmc-sierra.com Web Site: http://www.pmc-sierra.com
Revision History
Issue No.
1 2 3 4 5 6
Issue Date
Jan. 1999 Apr. 1999 June 1999 March 2000 Sept. 2001 Feb. 2002
Details of Change
Creation of document Added errata items 1.1, 1.2, 1.4, 1.5 Aligns with Issue 3 Production Release Data sheet Reset timing signal is inverted in Figure 40. Added patent award numbers Added errata items 2.5, 2.6 ,2.7 and 2.8
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
3
QRT DATA SHEET ERRATA Released
Table of Contents
Legal Information ................................................................................................................ 2 Contacting PMC-Sierra ....................................................................................................... 3 Table of Contents ................................................................................................................ 4 1 Introduction.................................................................................................................. 5 1.1 1.2 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Device Identification............................................................................................ 5 References ......................................................................................................... 5 Page 92 .............................................................................................................. 6 Page 109 ............................................................................................................ 6 Figure 40. Inverted Reset Signal ........................................................................ 6 Page 2 - US Patents ........................................................................................... 7 ESD Specification ............................................................................................... 7 Contradictions on Cell Timing/Latency ............................................................... 7 CHIP_MODE Register ........................................................................................ 7 2.7.1 2.7.2 2.7.3 2.8 3 3.1 Location ................................................................................................. 7 Original Wording .................................................................................... 7 Replacement Wording ........................................................................... 8
Documentation Deficiency List .................................................................................... 6
Typos on Ball Number of RAM_ADD(16) and RAM_PARITY ............................ 9 Short Tag Feature Restriction ........................................................................... 10
Device Functional Deficiency List ............................................................................. 10
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
4
QRT DATA SHEET ERRATA Released
1
Introduction
In this document: * * Section 2 lists documentation errors found in Issue 3 of the QSE Data Sheet (PMC-1980616). Section3 lists the known functional errata for Revision B of the PM73488 QSE.
1.1
Device Identification
The information contained in Section 2 relates to Revision B of the PM73488 QSE only. The device revision code is marked at the end of the Wafer Batch Code on the face of the device.
Figure 1 PM73488 QSE Branding Format
Pin One Indicator PMC LOGO Name
TM
Part Number Assembler Part Number Assembler Lot Number Assembly Date Code
zzzz
QSE
PM73488-PI xxxxxxx L_______B LZyyww %%
TOP VIEW SCALE : 3:1 (APPROX.)
Place of Manufacture placement determined by assembler (in small font)
1.2
References
* Issue 3 of the QSE Data Sheet (PMC-1980616).
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
5
QRT DATA SHEET ERRATA Released
2
Documentation Deficiency List
This section lists the known documentation deficiencies for Issue 3 of the QSE Data Sheet (PMC-1980616) as of the publication date of this document. For each specific deficiency, the location of the passage in question, the deficient text, and the replacement text are described. New text is shown in bold. Deleted text is shown as underlined. For more general issues, a description of the nature of the error is given, along with a passage that correctly describes the concept or device function. Please report any documentation deficiencies not covered in this errata to PMC-Sierra.
2.1
Page 92
Add to GANG_DEAD_ACK register description: For example, if the gang size is 8, and 4 out of the 8 ports are dead/disabled, then a GANG_DEAD_NACK is returned if a cell is sent to any of the 4 dead ports, even though the whole gang (of 8) is not dead/disabled
2.2
Page 109
Add to GANG_DEAD_NACK description: For example, if the gang size is 8, and 4 out of the 8 ports are dead/disabled, then a GANG_DEAD_NACK is returned if a cell is sent to any of the 4 dead ports, even though the whole gang (of 8) is not dead/disabled.
2.3
Figure 40. Inverted Reset Signal
The RESET signal shown in figure 40 of the data sheet (below) is defined as being asserted during the time period (Tres). Since the RESET pin on the QSE is defined as active high, the RESET signal in figure 40 is incorrect and should be inverted.
Figure 40 (Data sheet Issue 3). Reset Timing
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
6
QRT DATA SHEET ERRATA Released
2.4
Page 2 - US Patents
The PM73488 is protected by the following patents: US patent 5,557,607 US patent 5,570,348 US patent 5,583,861 US patent 6,151,301 US patent 6,188,690B1
2.5
ESD Specification
There is no ESD specification in Table 22 (Absolute Maximum Ratings) under Section 7, Physical Characteristic, in the current QSE data sheet. The qualification data indicates that the QSE meets 500 V ESD.
2.6
Contradictions on Cell Timing/Latency
There are contradictions on cell timing and latency specification between Sections 3.9 and 4.2.2 in the QSE data sheet. Section 3.9 Cell/Timing Latency mentions that in aggregate mode 1 the latency is 13 clock cycles. Section 4.2.2 Relation Between Local CELL_START and Data Out of the QSE mentions that "The switch latency is 8 clocks from the local CELL_START signal for all unicast gang modes, except for unicast gang mode = 0, in which case the switch latency is 11 clocks." Section 3.9 is correct, and Section 4.2.2 is in error.
2.7
CHIP_MODE Register
There is a typo in the bit description of the CHIP_MODE register. The bit 1 is shown as Reserved in one place and as SWITCH_MODE in another place. In fact, the bit 1 in this register should be a reserved bit defaulted to `0'. Therefore, the SWITCH_MODE description should be ignored.
2.7.1
Location
The bit 1 (SWITCH_MODE) bit description is in the CHIP_MODE register under Section 9.3.2 of the QSE data sheet.
2.7.2
Original Wording
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
7
QRT DATA SHEET ERRATA Released
Field (Bits)
ENABLE_STAT_PIN (7) PARITY_CHECK (6) /NO_DATA_OUT (5) /NO_DATA_IN (4) MULTICAST_MODE (3) CHIP_HARDWARE_RESET (2) 0 0 1 1 0
Description
Enable StatOut and CtrlIn pin functionality StatOut behaves like No Data In, and Ctrl In behaves like No Data Out. Parity checks on cell header disabled. Normal operation.
Current value at the /NO_DATA_OUT pin. Current value at the /NO_DATA_IN pin. 1 0 1 External RAM present. No external RAM. Writing a one to this bit will put the chip is in hardware reset (except the processor interface, which remains untouched). Writing a zero to this bit will take the chip out of hardware reset.
Upon pin-reset, this bit comes up as a one. A zero must be explicitly written to this bit before the chip can function normally. SWITCH_MODE (1) Reserved (1:0)
1 0
Double switch mode. Single switch mode.
Write with a 0 to maintain future software compatibility.
2.7.3
Replacement Wording
Field (Bits)
ENABLE_STAT_PIN (7) PARITY_CHECK (6) /NO_DATA_OUT (5) /NO_DATA_IN (4) MULTICAST_MODE (3) CHIP_HARDWARE_RESET (2) 1 0 1 1 0
Description
Enable StatOut and CtrlIn pin functionality StatOut behaves like No Data In, and Ctrl In behaves like No Data Out. Parity checks on cell header disabled. Normal operation.
Current value at the /NO_DATA_OUT pin. Current value at the /NO_DATA_IN pin. 1 0 1 External RAM present. No external RAM. Writing a one to this bit will put the chip is in hardware reset (except the processor interface, which remains untouched). Writing a zero to this bit will take the chip out of hardware reset.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
8
QRT DATA SHEET ERRATA Released
Upon pin-reset, this bit comes up as a one. A zero must be explicitly written to this bit before the chip can function normally. Reserved (1:0) Write with a 0 to maintain future software compatibility.
2.8
Typos on Ball Number of RAM_ADD(16) and RAM_PARITY
There are typos on ball number of RAM_ADD(16) and RAM_PARITY pins in Table 17 in the QSE data sheet. Table 17 in Section 6.4.2 shows that the ball number for the RAM_ADD(16) pin is F18 and for the RAM_PARITY pin is F19. This is not correct. The correct ball number for RAM_ADD(16) pin is F19 and for the RAM_PARITY pin is F18 as shown in Table 14 in Section 6.2 and in Table 15 in Section 6.3.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
9
QRT DATA SHEET ERRATA Released
3
Device Functional Deficiency List
This section lists the known functional deficiencies for Revision B of the QSE as of the publication date of this document. For each deficiency, the known workaround and the operating constraints, with and without the workaround, are also described. Please report any functional deficiencies not covered in this errata to PMC-Sierra.
3.1
Short Tag Feature Restriction
This does not apply to cases when the QRT is used in conjunction with the QSE. Short Tags should only be used when the QSE is used with a device other than the QRT. In the case where the QSE is used with a device other than the QRT, the SHORT_TAG_ENABLE (pg. 97 in 9.3.7 Extended Chip mode) can only be used if Unicast Gang Mode (9.3.25 on pg. 105) is NOT 0.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
10
QRT DATA SHEET ERRATA Released
Notes
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers' Internal Use Document ID: PMC-1981490, Issue 6
11


▲Up To Search▲   

 
Price & Availability of 1981490

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X