View 2SD0601A_966358.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistor
2SD0601A (2SD601A)
Silicon NPN epitaxial planer type
For general amplification Complementary to 2SB0709A (2SB709A)
0.40+0.10 n0.05
Unit: mm
0.16+0.10 -0.06
s Features
q q q
3
1.50+0.25 -0.05 2.8+0.2 -0.3
High foward current transfer ratio hFE. Low collector to emitter saturation voltage VCE(sat). Mini type package, allowing downsizing of the equipment and automatic insertion through the tape packing and the magazine packing.
10
1
2
(0.65)
(0.95) (0.95) 1.90.1 2.90+0.20 -0.05
1.1+0.2 -0.1
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature
Symbol VCBO VCEO VEBO ICP IC PC Tj Tstg
Ratings 60 50 7 200 100 200 150 -55 ~ +150
Unit V V V mA mA mW C C
1:Base 2:Emitter 3:Collector
0 to 0.1
1.1+0.3 -0.1
s Absolute Maximum Ratings
(Ta=25C)
EIAJ:SC-59 Mini3-G1 Package
Marking symbol : Z
s Electrical Characteristics
Parameter Collector cutoff current Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio Collector to emitter saturation voltage Transition frequency Noise voltage Collector output capacitance
*h
(Ta=25C)
Symbol ICBO ICEO VCBO VCEO VEBO hFE1 hFE2 VCE(sat) fT NV Cob
*
Conditions VCB = 20V, IE = 0 VCE = 10V, IB = 0 IC = 10A, IE = 0 IC = 2mA, IB = 0 IE = 10A, IC = 0 VCE = 10V, IC = 2mA VCE = 2V, IC = 100mA IC = 100mA, IB = 10mA VCB = 10V, IE = -2mA, f = 200MHz VCE = 10V, IC = 1mA, GV = 80dB Rg = 100k, Function = FLAT VCB = 10V, IE = 0, f = 1MHz
min
typ
max 0.1 100
60 50 7 160 90 0.1 150 110 3.5 0.3 460
0.40.2
5
Unit A A V V V
V MHz mV pF
FE1
Rank classification
Rank hFE1 Q 160 ~ 260 ZQ R 210 ~ 340 ZR S 290 ~ 460 ZS Note.) The Part number in the Parenthesis shows conventional part number.
Marking Symbol
542
Transistor
PC -- Ta
240 60 Ta=25C IB=160A 200 50 1000
2SD0601A
IC -- VCE
1200 VCE=10V Ta=25C
IB -- VBE
Collector power dissipation PC (mW)
Collector current IC (mA)
160
40
Base current IB (A)
140A 120A 100A 30 80A 20 60A 40A 10 20A
800
120
600
80
400
40
200
0 0 20 40 60 80 100 120 140 160
0 0 2 4 6 8 10
0 0 0.2 0.4 0.6 0.8 1.0
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base to emitter voltage VBE (V)
IC -- VBE
200 VCE=10V 200 240 VCE=10V Ta=25C
IC -- I B
Collector to emitter saturation voltage VCE(sat) (V)
100 30 10 3 1 0.3 0.1 0.03 0.01 0.1
VCE(sat) -- IC
IC/IB=10
Collector current IC (mA)
Collector current IC (mA)
160
160
120 25C Ta=75C 80 -25C
120
80
25C
Ta=75C -25C
40
40
0 0 0.4 0.8 1.2 1.6 2.0
0 0 200 400 600 800 1000
0.3
1
3
10
30
100
Base to emitter voltage VBE (V)
Base current IB (A)
Collector current IC (mA)
hFE -- IC
600 VCE=10V 300
fT -- I E
240 VCB=10V Ta=25C
NV -- IC
VCE=10V GV=80dB 200 Function=FLAT Ta=25C 160 Rg=100k
Forward current transfer ratio hFE
500
Transition frequency fT (MHz)
400
Ta=75C 25C
180
300
Noise voltage NV (mV)
240
-25C
120
120
200
80 22k 40 4.7k
100
60
0 0.1
0.3
1
3
10
30
100
0 - 0.1 - 0.3
-1
-3
-10
-30
-100
0 10
30
100
300
1000
Collector current IC (mA)
Emitter current IE (mA)
Collector current IC (mA)
543
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SD0601A

	To Download 2SD0601A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .