View BSP1003_976514.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Philips Semiconductors
Product specification
N-channel enhancement mode TrenchMOSTM transistor
FEATURES
* 'Trench' technology * Low on-state resistance * Fast switching * High thermal cycling performance * Low thermal resistance
BSP100
SYMBOL
d
QUICK REFERENCE DATA
VDSS = 30 V ID = 6 A
g
RDS(ON) 100 m (VGS = 10 V) RDS(ON) 200 m (VGS = 4.5 V)
s
GENERAL DESCRIPTION
N-channel enhancement mode field-effect transistor in a plastic envelope using 'trench' technology. Applications:* Motor and relay drivers * d.c. to d.c. converters * Logic level translator The BSP100 is supplied in the SOT223 surface mounting package.
PINNING
PIN 1 2 3 4 gate drain source drain (tab) DESCRIPTION
SOT223
4
1
2
3
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER VDSS VDGR VGS ID IDM PD Tj, Tstg Drain-source voltage Drain-gate voltage Gate-source voltage Continuous drain current Pulsed drain current Total power dissipation Operating junction and storage temperature CONDITIONS Tj = 25 C to 150C Tj = 25 C to 150C; RGS = 20 k Tsp = 25 C Tsp = 100 C Tamb = 25 C Tsp = 25 C Tsp = 25 C MIN. - 65 MAX. 30 30 20 61 4.4 3.2 24 8.3 150 UNIT V V V A A A A W C
THERMAL RESISTANCES
SYMBOL Rth j-sp Rth j-amb PARAMETER Thermal resistance junction to solder point Thermal resistance junction to ambient CONDITIONS surface mounted, FR4 board surface mounted, FR4 board TYP. 12 70 MAX. 15 UNIT K/W K/W
1 Continuous current rating limited by package February 1999 1 Rev 1.000
Philips Semiconductors
Product specification
N-channel enhancement mode TrenchMOSTM transistor
AVALANCHE ENERGY LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER EAS IAS Non-repetitive avalanche energy Non-repetitive avalanche current CONDITIONS Unclamped inductive load, IAS = 6 A; tp = 0.2 ms; Tj prior to avalanche = 25C; VDD 15 V; RGS = 50 ; VGS = 10 V MIN. -
BSP100
MAX. 23 6
UNIT mJ A
ELECTRICAL CHARACTERISTICS
Tj= 25C unless otherwise specified SYMBOL PARAMETER V(BR)DSS VGS(TO) RDS(ON) gfs ID(ON) IDSS IGSS Qg(tot) Qgs Qgd td on tr td off tf Ld Ls Ciss Coss Crss Drain-source breakdown voltage Gate threshold voltage Drain-source on-state resistance CONDITIONS VGS = 0 V; ID = 10 A; Tj = -55C VDS = VGS; ID = 1 mA Tj = 150C Tj = -55C VGS = 10 V; ID = 2.2 A VGS = 4.5 V; ID = 1 A VGS = 10 V; ID = 2.2 A; Tj = 150C Forward transconductance VDS = 20 V; ID = 2.2 A On-state drain current VGS = 10 V; VDS = 1 V; VGS = 4.5 V; VDS = 5 V Zero gate voltage drain VDS = 24 V; VGS = 0 V; current VDS = 24 V; VGS = 0 V; Tj = 150C Gate source leakage current VGS = 20 V; VDS = 0 V Total gate charge Gate-source charge Gate-drain (Miller) charge Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time Internal drain inductance Internal source inductance Input capacitance Output capacitance Feedback capacitance ID = 2.3 A; VDD = 15 V; VGS = 10 V MIN. 30 27 1 0.4 2 3.5 2 TYP. MAX. UNIT 2 80 120 4.5 10 0.6 10 6 0.7 0.7 6 8 21 15 2.5 5 250 88 54 2.8 3.2 100 200 170 100 10 100 V V V V V m m m S A A nA A nA nC nC nC ns ns ns ns nH nH pF pF pF
VDD = 20 V; RD = 18 ; VGS = 10 V; RG = 6 Resistive load Measured tab to centre of die Measured from source lead to source bond pad VGS = 0 V; VDS = 20 V; f = 1 MHz
February 1999
2
Rev 1.000
Philips Semiconductors
Product specification
N-channel enhancement mode TrenchMOSTM transistor
REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS
Tj = 25C unless otherwise specified SYMBOL PARAMETER IS ISM VSD trr Qrr Continuous source current (body diode) Pulsed source current (body diode) Diode forward voltage Reverse recovery time Reverse recovery charge CONDITIONS Tsp = 25 C MIN. IF = 1.25 A; VGS = 0 V IF = 1.25 A; -dIF/dt = 100 A/s; VGS = 0 V; VR = 25 V -
BSP100
TYP. MAX. UNIT 0.82 69 55 6 24 1.2 A A V ns nC
120 110 100 90 80 70 60 50 40 30 20 10 0
PD%
Normalised Power Derating
100 Peak Pulsed Drain Current, IDM (A) RDS(on) = VDS/ ID tp = 10 us 10 100 us d.c. 1 ms 10 ms 100 ms BSP100
1
0.1
0
20
40
60
80 Tsp / C
100
120
140
1
10 Drain-Source Voltage, VDS (V)
100
Fig.1. Normalised power dissipation. PD% = 100PD/PD 25 C = f(Tsp)
Fig.3. Safe operating area. Tsp = 25 C ID & IDM = f(VDS); IDM single pulse; parameter tp
120 110 100 90 80 70 60 50 40 30 20 10 0
ID%
Normalised Current Derating
100 Peak Pulsed Drain Current, IDM (A) BSP100
10
D = 0.5 0.2
1
0.1 0.05 P D tp D = tp/T
0.1
0.02 single pulse T 1E-03 1E-02 1E-01 1E+00 1E+01
0.01 1E-06
1E-05
1E-04
0
20
40
60
80 100 Tsp / C
120
140
Pulse width, tp (s)
Fig.2. Normalised continuous drain current. ID% = 100ID/ID 25 C = f(Tsp); conditions: VGS 10 V
Fig.4. Transient thermal impedance. Zth j-sp = f(t); parameter D = tp/T
February 1999
3
Rev 1.000
Philips Semiconductors
Product specification
N-channel enhancement mode TrenchMOSTM transistor
BSP100
6 Drain Current, ID (A) 10 9 8 7 6 5 4 3 2 1 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Drain-Source Voltage, VDS (V) 1.8 2 VGS = 20 V Tj = 25 C 4.2 V 4V 3.8 V 3.6 V 3.4 V 3.2 V 2 1 0 10 V 5V 5
Transconductance, gfs (S)
Tj = 25 C 4 150 C 3
0
1
2
3
4 5 6 7 Drain current, ID (A)
8
9
10
Fig.5. Typical output characteristics, Tj = 25 C. ID = f(VDS); parameter VGS
Fig.8. Typical transconductance, Tj = 25 C. gfs = f(ID) ; parameter Tj
a
0.5
Drain-Source On Resistance, RDS(on) (Ohms) 3.2 V 3.4 V 3.6 V 3.8V 4V 4.2 V Tj = 25 C
2
SOT223 30V Trench
Normalised RDS(ON) = f(Tj)
0.4
1.5
0.3
1
0.2 VGS =5 V 10V 20V 0 0 1 2 3 4 5 6 Drain Current, ID (A) 7 8 9 10
0.1
0.5
0 -50
0
50 Tj / C
100
150
Fig.6. Typical on-state resistance, Tj = 25 C. RDS(ON) = f(ID); parameter VGS
Fig.9. Normalised drain-source on-state resistance. a = RDS(ON)/RDS(ON)25 C = f(Tj)
VGS(TO) / V 4
Drain current, ID (A) 10 9 8 7 6 5 4 3 2 1 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Tj = 25 C 150 C VDS > ID X RDS(ON)
3
max. typ.
2
1
min.
0 -60 -40 -20 0 20 40 60 Tj / C 80 100 120 140
Gate-source voltage, VGS (V)
Fig.7. Typical transfer characteristics. ID = f(VGS); parameter Tj
Fig.10. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS
February 1999
4
Rev 1.000
Philips Semiconductors
Product specification
N-channel enhancement mode TrenchMOSTM transistor
BSP100
1E-01
Sub-Threshold Conduction
10 9
Source-Drain Diode Current, IF (A) VGS = 0 V
1E-02 min typ max
8 7 6 5 4 Tj = 25 C 3 2 1 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5
1E-03
150 C
1E-04
1E-05
1E-06
0
1
2
3
4
5
Drain-Source Voltage, VSDS (V)
Fig.11. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 C; VDS = VGS
Fig.14. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj
Non-repetitive Avalanche current, IAS (A) 10 BSP100 25 C
Capacitances, Ciss, Coss, Crss (pF) 1000
Ciss 1 100 Coss Crss
VDS
Tj prior to avalanche =125 C
tp ID
10 0.1 1 10 Drain-Source Voltage, VDS (V) 100
0.1 1E-06
1E-05
1E-04 Avalanche time, tp (s)
1E-03
1E-02
Fig.12. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz
Fig.15. Maximum permissible non-repetitive avalanche current (IAS) versus avalanche time (tp); unclamped inductive load
Gate-source voltage, VGS (V) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 ID = 2.3A Tj = 25 C VDD = 15 V
1
2
3
4 5 6 7 Gate charge, QG (nC)
8
9
10
Fig.13. Typical turn-on gate-charge characteristics. VGS = f(QG); parameter VDS
February 1999
5
Rev 1.000
Philips Semiconductors
Product specification
N-channel enhancement mode TrenchMOSTM transistor
PRINTED CIRCUIT BOARD
BSP100
Dimensions in mm.
36
18
60 9 4.6 4.5
10
7 15 50
Fig.16. PCB for thermal resistance and power rating for SOT223. PCB: FR4 epoxy glass (1.6 mm thick), copper laminate (35 m thick).
February 1999
6
Rev 1.000
Philips Semiconductors
Product specification
N-channel enhancement mode TrenchMOSTM transistor
MECHANICAL DATA
Plastic surface mounted package; collector pad for good heat transfer; 4 leads SOT223
BSP100
D
B
E
A
X
c y HE b1 vMA
4
Q A A1
1
e1 e
2
bp
3
wM B detail X
Lp
0
2 scale
4 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.8 1.5 A1 0.10 0.01 bp 0.80 0.60 b1 3.1 2.9 c 0.32 0.22 D 6.7 6.3 E 3.7 3.3 e 4.6 e1 2.3 HE 7.3 6.7 Lp 1.1 0.7 Q 0.95 0.85 v 0.2 w 0.1 y 0.1
OUTLINE VERSION SOT223
REFERENCES IEC JEDEC EIAJ
EUROPEAN PROJECTION
ISSUE DATE 96-11-11 97-02-28
Fig.17. SOT223 surface mounting package.
Notes 1. This product is supplied in anti-static packaging. The gate-source input must be protected against static discharge during transport or handling. 2. Refer to Discrete Semiconductor Packages, Data Handbook SC18. 3. Epoxy meets UL94 V0 at 1/8".
February 1999
7
Rev 1.000
Philips Semiconductors
Product specification
N-channel enhancement mode TrenchMOSTM transistor
DEFINITIONS
Data sheet status Objective specification Product specification Limiting values
BSP100
This data sheet contains target or goal specifications for product development. This data sheet contains final product specifications.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. (c) Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
February 1999
8
Rev 1.000

▲Up To Search▲

Price & Availability of BSP1003

	To Download BSP1003 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .