|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Philips Semiconductors Product specification Rectifier diodes ultrafast, rugged FEATURES * Low forward volt drop * Fast switching * Soft recovery characteristic * Reverse surge capability * High thermal cycling performance * Low thermal resistance BYW29E series SYMBOL QUICK REFERENCE DATA VR = 100V/ 150 V/ 200 V VF 0.895 V IF(AV) = 8 A IRRM 0.2 A trr 25 ns k 1 a 2 GENERAL DESCRIPTION Ultra-fast, epitaxial rectifier diodes intended for use as output rectifiers in high frequency switched mode power supplies. The BYW29E series is supplied in the conventional leaded SOD59 (TO220AC) package. PINNING PIN 1 2 tab DESCRIPTION cathode anode cathode SOD59 (TO220AC) tab 1 2 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER VRRM VRWM VR IF(AV) IFRM IFSM IRRM IRSM Tj Tstg Peak repetitive reverse voltage Working peak reverse voltage Continuous reverse voltage Average rectified forward current Repetitive peak forward current Non-repetitive peak forward current Peak repetitive reverse surge current Peak non-repetitive reverse surge current Operating junction temperature Storage temperature square wave; = 0.5; Tmb 128 C square wave; = 0.5; Tmb 128 C t = 10 ms t = 8.3 ms sinusoidal; with reapplied VRRM(max) tp = 2 s; = 0.001 tp = 100 s CONDITIONS BYW29E - 40 MIN. -100 100 100 100 MAX. -150 150 150 150 8 16 80 88 0.2 0.2 150 150 -200 200 200 200 UNIT V V V A A A A A A C C ESD LIMITING VALUE SYMBOL VC PARAMETER Electrostatic discharge capacitor voltage CONDITIONS Human body model; C = 250 pF; R = 1.5 k MIN. MAX. 8 UNIT kV August 2001 1 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast, rugged THERMAL RESISTANCES SYMBOL PARAMETER Rth j-mb Rth j-a Thermal resistance junction to mounting base Thermal resistance junction to ambient CONDITIONS MIN. in free air - BYW29E series TYP. MAX. UNIT 60 2.7 K/W K/W ELECTRICAL CHARACTERISTICS Tj = 25 C unless otherwise specified SYMBOL PARAMETER VF IR Qrr trr1 trr2 Vfr Forward voltage Reverse current Reverse recovered charge Reverse recovery time Reverse recovery time Forward recovery voltage CONDITIONS IF = 8 A; Tj = 150C IF = 8 A IF = 20 A VR = VRWM VR = VRWM; Tj = 100C IF = 2 A; VR 30 V; -dIF/dt = 20 A/s IF = 1 A; VR 30 V; -dIF/dt = 100 A/s IF = 0.5 A to IR = 1 A; Irec = 0.25 A IF = 1 A; dIF/dt = 10 A/s MIN. TYP. MAX. UNIT 0.8 0.92 1.1 2 0.2 4 20 15 1 0.895 1.05 1.3 10 0.6 11 25 20 V V V A mA nC ns ns V August 2001 2 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast, rugged BYW29E series I dI F dt F 0.5A IF t rr time 0A I rec = 0.25A IR trr2 Q I I s 10% 100% R rrm I = 1A R Fig.1. Definition of trr1, Qs and Irrm Fig.4. Definition of trr2 I F 12 10 8 PF / W Vo = 0.791 V Rs = 0.013 Ohms BYW29 Tmb(max) / C 108 D = 1.0 115 0.5 122 129 136 143 T t time VF V VF time fr 6 0.1 4 0.2 I tp D= tp T 2 0 0 2 4 6 IF(AV) / A 8 10 150 12 Fig.2. Definition of Vfr Fig.5. Maximum forward dissipation PF = f(IF(AV)); square current waveform where IF(AV) =IF(RMS) x D. Tmb(max) / C a = 1.57 1.9 2.2 2.8 4 R 8 7 6 PF / W Vo = 0.791 V Rs = 0.013 Ohms BYW29 122 125.5 129 132.5 136 139.5 143 146.5 D.U.T. Voltage Pulse Source 5 4 3 Current shunt 2 to 'scope 1 0 0 1 2 3 4 IF(AV) / A 5 6 7 150 8 Fig.3. Circuit schematic for trr2 Fig.6. Maximum forward dissipation PF = f(IF(AV)); sinusoidal current waveform where a = form factor = IF(RMS) / IF(AV). August 2001 3 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast, rugged BYW29E series trr / ns 1000 100 Qs / nC 100 IF=10A IF=10A 5A 2A 1A 10 IF=1A 10 1 1.0 1 10 dIF/dt (A/us) 100 1.0 10 -dIF/dt (A/us) 100 Fig.7. Maximum trr at Tj = 25 C. Fig.10. Maximum Qs at Tj = 25 C. 10 Irrm / A 10 Transient thermal impedance, Zth j-mb (K/W) IF=10A 1 IF=1A 1 0.1 0.1 0.01 P D tp D= tp T t 0.01 1 10 -dIF/dt (A/us) 100 0.001 1us T 10us 100us 1ms 10ms 100ms 1s 10s pulse width, tp (s) PBYL1025 Fig.8. Maximum Irrm at Tj = 25 C. Fig.11. Transient thermal impedance; Zth j-mb = f(tp). 30 IF / A Tj=150 C Tj=25 C BYW29 20 typ 10 max 0 0 0.5 1 VF / V 1.5 2 Fig.9. Typical and maximum forward characteristic IF = f(VF); parameter Tj August 2001 4 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast, rugged MECHANICAL DATA Dimensions in mm Net Mass: 2 g Plastic single-ended package; heatsink mounted; 1 mounting hole; 2-lead TO-220 BYW29E series SOD59 E P A A1 q D1 D L2(1) L1 Q L b1 1 2 b e c 0 5 scale 10 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 4.5 4.1 A1 1.39 1.27 b 0.9 0.7 b1 1.3 1.0 c 0.7 0.4 D 15.8 15.2 D1 6.4 5.9 E 10.3 9.7 e 5.08 L 15.0 13.5 L1 3.30 2.79 L2 (1) P 3.8 3.6 q 3.0 2.7 Q 2.6 2.2 3.0 Note 1. Terminals in this zone are not tinned. OUTLINE VERSION SOD59 REFERENCES IEC JEDEC 2-lead TO-220 EIAJ EUROPEAN PROJECTION ISSUE DATE 97-06-11 Fig.12. TO220AC; pin 1 connected to mounting base. Notes 1. Refer to mounting instructions for TO220 envelopes. 2. Epoxy meets UL94 V0 at 1/8". August 2001 5 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast, rugged DEFINITIONS Data sheet status Objective specification Product specification Limiting values BYW29E series This data sheet contains target or goal specifications for product development. This data sheet contains final product specifications. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 2001 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. August 2001 6 Rev 1.400 |
Price & Availability of BYW29ESERIES4 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |