 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RFP8P10 Data Sheet July 1999 File Number 1496.2 8A, 100V, 0.400 Ohm, P-Channel Power MOSFET This P-Channel enhancement mode silicon gate power field effect transistor is designed for applications such as switching regulators, switching convertors, motor drivers, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. These types can be operated directly from integrated circuits. Formerly developmental type TA17511. Features * 8A, 100V * rDS(ON) = 0.400 * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards" Symbol D Ordering Information PART NUMBER RFP8P10 PACKAGE TO-220AB BRAND RFP8P10 G S NOTE: When ordering, include the entire part number. Packaging TO-220AB SOURCE DRAIN GATE DRAIN (FLANGE) 4-165 CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright (c) Intersil Corporation 1999. RFP8P10 Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified RFP8P10 Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg -100 -100 8 20 20 75 0.6 -55 to 150 300 260 UNITS V V A A V W W/oC oC oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 125oC. Electrical Specifications PARAMETER TC = 25oC, Unless Otherwise Specified SYMBOL BVDSS VGS(TH) IDSS TEST CONDITIONS ID = -250A, VGS = 0 VGS = VDS, ID = -250A VDS = Rated BVDSS, VGS = 0V VDS = 0.8 x Rated BVDSS, VGS = 0V TJ = 125oC MIN -100 -2 VGS = 0V, VDS = 25V, f = 1MHz (Figure 9) RFP8P10 18 70 166 94 -4 1 25 100 0.400 3.2 60 150 275 175 1500 700 300 1.67 TYP MAX UNITS V V A A nA V ns ns ns ns pF pF pF oC/W Drain to Source Breakdown Voltage Gate Threshold Voltage Zero Gate Voltage Drain Current Gate to Source Leakage Current Drain to Source On Resistance (Note 2) Drain to Source On Voltage (Note 2) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Thermal Resistance, Junction to Case IGSS rDS(ON) VDS(ON) td(ON) tr td(OFF) tf CISS COSS CRSS RJC VGS = 20V, VDS = 0 ID = 8A, VGS = -10V (Figures 6, 7) ID = 8A, VGS = -10V ID 4A, VDD = 50V, RG = 50, VGS = -10V RL = 12, (Figure 10) Source to Drain Diode Specifications PARAMETER Source to Drain Diode Voltage (Note 2) Diode Reverse Recovery Time NOTES: 2. Pulse Test: Pulse Width 300s, Duty Cycle 2% 3. Repetitive rating: pulse width is limited by maximum junction temperature. SYMBOL VSD trr ISD = -4A ISD = -4A, dlSD/dt = -100A/s TEST CONDITIONS MIN TYP 200 MAX -1.4 UNITS V ns 4-166 RFP8P10 Typical Performance Curves 1.2 POWER DISSIPATION MULTIPLIER 1.0 10 0.8 0.6 0.4 0.2 0 ID, DRAIN CURRENT (A) 8 6 4 2 0 50 100 150 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (oC) TC, CASE TEMPERATURE (oC) FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE 100 TJ = MAX RATED TC = 25oC ID, DRAIN CURRENT (A) 24 20 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX TC = 25oC VGS = -20V VGS = -10V 12 8 4 VGS = -3V 0 VGS = -9V VGS = -5V VGS = -6V VGS = -8V VGS = -7V 16 ID, DRAIN CURRENT (A) 10 ID MAX CONTINUOUS DC 1 OPERATION IN THIS AREA MAY BE LIMITED BY rDS(ON) VGS = -4V 0.1 -1 -10 -100 VDS, DRAIN TO SOURCE VOLTAGE (V) -1000 0 -1 -3 -5 -6 -2 -4 VDS, DRAIN TO SOURCE VOLTAGE (V) -7 FIGURE 3. FORWARD BIAS SAFE OPERATING AREA 0.4 VDS = 10V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX -40oC 125oC 25oC rDS(ON), DRAIN TO SOURCE ON RESISTANCE () 0.3 FIGURE 4. SATURATION CHARACTERISTICS IDS(ON), DRAIN TO SOURCE CURRENT (A) 24 20 16 12 8 4 0 -1 VGS = 10V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 125oC 0.2 25oC -40oC 0.1 125oC -2 -3 -4 -40oC -5 -6 -7 -8 0 0 2 4 VGS, GATE TO SOURCE VOLTAGE (V) 8 12 6 10 14 ID, DRAIN CURRENT (A) 16 18 20 FIGURE 5. TRANSFER CHARACTERISTICS FIGURE 6. DRAIN TO SOURCE ON RESISTANCE vs DRAIN CURRENT 4-167 RFP8P10 Typical Performance Curves 2.0 NORMALIZED DRAIN TO SOURCE ON RESISTANCE PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX ID = 8A, VGS = 10V 1.5 (Continued) NORMALIZED GATE THRESHOLD VOLTAGE 1.4 ID = 250A VDS = VGS 1.2 1.0 1.0 0.5 0.8 0 -50 0 50 100 150 0.6 -50 TJ, JUNCTION TEMPERATURE (oC) 0 50 100 TJ, JUNCTION TEMPERATURE (oC) 150 FIGURE 7. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE 2400 2000 C, CAPACITANCE (pF) 1600 1200 800 400 COSS CRSS 0 0 10 20 30 40 VDS, DRAIN TO SOURCE VOLTAGE (V) 50 CISS VGS = 0V, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS CDS + CGD FIGURE 8. NORMALIZED GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE 100 VDS, DRAIN TO SOURCE VOLTAGE (V) GATE SOURCE VOLTAGE 10 VGS, GATE TO SOURCE VOLTAGE (V) 75 VDD = BVDSS VDD = VDSS 8 50 RL = 12.5 IG (REF) = 0.92mA VGS = -10V 0.75BVDSS 0.75BVDSS 0.50BVDSS 0.50BVDSS 0.25BVDSS 0.25BVDSS DRAIN SOURCE VOLTAGE 6 4 25 2 0 I (REF) 20 G IG (ACT) t, TIME (ms) I (REF) 80 G IG (ACT) 0 NOTE: Refer to Intersil Applications Notes AN7254 and AN7260 FIGURE 9. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE FIGURE 10. NORMALIZED SWITCHING WAVEFORMS FOR CONSTANT GATE CURRENT Test Circuits and Waveforms tON td(ON) tr RL 0 10% tOFF td(OFF) tf 10% DUT VGS RG VDD + VDS VGS 0 90% 90% 10% 50% PULSE WIDTH 90% 50% FIGURE 11. SWITCHING TIME TEST CIRCUIT FIGURE 12. RESISTIVE SWITCHING WAVEFORMS 4-168 RFP8P10 Test Circuits and Waveforms (Continued) CURRENT REGULATOR -VDS (ISOLATED SUPPLY) 0 VDS DUT 12V BATTERY 0.2F 50k 0.3F Qgs D G 0 IG(REF) IG CURRENT SAMPLING RESISTOR S +VDS ID CURRENT SAMPLING RESISTOR 0 DUT VDD Qgd VGS Qg(TOT) IG(REF) FIGURE 13. GATE CHARGE TEST CIRCUIT FIGURE 14. GATE CHARGE WAVEFORMS All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 4-169 |
Price & Availability of FN1496
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |