View MN102L35G_991729.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MN102L35G
Type ROM (x16-bit) x RAM (x 16-bit) x Package (Conventional Package) Minimum Instruction Execution Time Interrupts
MN102L35G 144 K 5K SDIP064-P-0750C *Lead-free (SDIP064-P-0750) 167 ns (at 4.75 V to 5.25 V, 12 MHz) External (4 lines) Internal (23 lines) : Timer x 8, A/D x 1, Undefined command x 1, RESET x 1, OSD x 2, Serial x 2, I2C x 1, Caption x 2, Remote control x 1, Address coincidence x 4 8-bit timer x 2 16-bit timer x 2 Watchdog timer: 17-bit x 1 I2C x 1: for multimaster mode, bus line (output) has 2 systems Sync serial / I2C (master) / UART x 1 * Built-in sync separator x 2
Timer Counter
Serial Interface Caption I/O Pins A/D Inputs D/A Outputs PWM Special Ports CRTC Notes Electrical Characteristics
D/A characteristics
I/O Input
49 1
* Common use * Common use
8-bit x 8-ch. (with S/H) 4-bit x 4-ch. (analog R, G, B, YM output) 8-bit x 6-ch. Remote control reception 3-layer display (graphics, characters, splits) Remote control input discriminant circuit built-in
Limit Parameter D/A full-scale output current D/A output voltage setting range D/A non-linear error D/A differential non-linear error D/A channel interval error Symbol IFS VO NLE DNLE IFS Condition min RL = 200 , VREF = 1.2 V, RIREF = 1.2 k RL = 200 , VREF = 1.2 V, RIREF = 1.2 k RL = 200 , VREF = 1.2 V, RIREF = 1.2 k RL = 200 , VREF = 1.2 V, RIREF = 1.2 k VREF = 1.2 V, RIREF = 1.2 k, Error from 4-channel average IFS 4.5 typ 5.0 max 5.5 1.1 0.5 0.5 5 mA V LSB LSB % Unit
(Ta = 25C , VDD = AVDD = 5.0 V , VSS = 0 V , fosc = 4 MHz)
1
MAE00013DEM
MN102L35G
Pin Assignment
P00,PMIN P01,SDA1 P02,SCL1 P03,ADIN0 P04,ADIN1 P05,ADIN2 P06,ADIN3 P07,ADIN4 P10,ADIN5,IRQ2 P11,ADIN6,IRQ3 P12,ADIN7 P13 P14 P15,PWM0 P16,PWM1 P17,PWM2 P20,PWM3 P21,PWM4 P22,PWM5 P23,CREF1 P24,VPH1 VDD P25,CREF0 P26,VPH0 P27,VCP P30,CVBS0 P31,CVBS1 P32,TM2IOA P33,TM2IOB P34,TM2IC P35,TM3IOA P36,TM3IOB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
MN102L35G
(
) : Conventional Package
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
VSS OSC2 OSC1 VDD P57,SCL0 P56,SDA0 P55,SBT P54,SBI,SBD P53,IRQ0 P52,IRQ1,VSYNC P51,RST P50,SBO TEST VCOI PDO AVDD P61,YM,DAYMOUT VREF IREF COMP P60,B,DABOUT P47,G,DAGOUT P46,R,DAROUT P45,YS P44,STOP P43,HSYNC VSS P42,OSDXI OSDXO P41,TM1IO P40,TM0IO P37,TM3IC
SDIP064-P-0750C
*Lead-free
(SDIP064-P-0750)
Support Tool
In-circuit Emulator EPROM Built-in Type
PX-ICE102L00 + PX-PRB102L35-SDIP064-P-0750 Type ROM (x 16-bit) RAM (x 16-bit) Minimum instruction execution time Package (Conventional Package) MN102LP35Z 144 K 5K 167 ns (at 4.75 V to 5.25 V, 12 MHz) SDIP064-P-0750C *Lead-free (SDIP064-P-0750)
MAE00013DEM
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL

▲Up To Search▲

Price & Availability of MN102L35G

	To Download MN102L35G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .