 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MILITARY DATA SHEET MNDS96F172M-X REV 1A0 Original Creation Date: 06/19/95 Last Update Date: 01/15/96 Last Major Revision Date: 06/19/95 RS-485 COMPARABLE QUAD DIFFERENTIAL DRIVER General Description The DS96F172 is a high speed quad differential line driver designed to meet EIA Standards RS-485. It offers improved performance due to the use of new, state-of-the-art L-FAST bipolar technology. The L-FAST technology allows for higher speeds and lower currents by utilizing extremely short gate delay times. The DS96F172 has wide positive and negative common mode range for multipoint applications in noisy environments. Positive and negative current-limiting is provided to protect the driver from line fault conditions over +12V to -7V common mode range. The DS96F172 features an active high and active low Enable common to all four drivers. Industry Part Number DS96F172 NS Part Numbers DS96F172ME/883 DS96F172MJ/883 Prime Die DS96M172 Controlling Document 5962-9076501 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNDS96F172M-X REV 1A0 MILITARY DATA SHEET (Absolute Maximum Ratings) Supply Voltage 7.0V Enable Input Voltage 5.5V Maximum Power Dissipation at 25C (Note 1, 2) E Pkg J Pkg Storage Temperature Range -65 C to + 175 C Lead Temperature Ceramic Dip (Soldering, 60 sec.) Note 1: Note 2: Derate J Pkg 12.5 mW/C above 25C. Derate E Pkg 13.3 mW/C above 25C. 300 C 2000mW 1800mW Recommended Operating Conditions Output Current Low (Iol) 60mA Output Current High (Ioh) -60mA Supply Voltage (Vcc) DS96F172 Min=4.50V, Typ=5.0V, Max=5.5V Common Mode Output Voltage (Voc) Min=-7.0V, Max=+12.0V Operating Temperature (Ta) Min=-55,Typ=+25,Max=+125c 2 MNDS96F172M-X REV 1A0 MILITARY DATA SHEET Electrical Characteristics (Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC = 5.5V AC: VCC = 5.0V SYMBOL VIL PARAMETER Logical 0 Input Voltage Logical 1 Input Voltage Input Clamp Voltage Differential Output Voltage Differential Output Voltage Differential Output Voltage Change In Magnitude of (VOD2) Change In Magnitude of (VOD2) Common Mode Output Voltage Common Mode Output Voltage Change in Magnitude of VOC Change in Magnitude of VOC Output Current With Power Off High Impedance State Output Current Logical 1 Input Current Logical 0 Input Current Supply Current Supply Current I = -18mA IO = 0mA VCC = 4.5V, RL = 54 ohms 1 VOD2 (2) Delta VOD (1) Delta VOD (2) VOC (1) VOC (2) Delta VOC (1) Delta VOC (2) IO IOZ VCC = 4.5V, RL = 100 ohms VCC = 4.5V, RL = 54 ohms 1 VCC = 4.5V, RL = 100 ohms 1 RL = 54 ohms RL = 100 ohms VCC = 4.5V, RL = 54 ohms VCC = 4.5V, RL = 100 ohms VCC = 0V, VO = -7V to 12V VO = -7V to 12V -200 -200 -50 -50 1.5 1.2 2.0 -200 -400 -200 -400 200 400 200 400 3 3 200 200 50 50 2 -1.5 6 CONDITIONS NOTES PINNAME MIN MAX .8 .7 VIH VIC VOD1 VOD2 (1) UNIT V V V V V V V V mV mV mV mV V V mV mV uA uA SUBGROUPS 1 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2 3 1, 2, 3 1, 2 3 1, 2 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 IIH IIL ICC ICCX VI = 2.4V VI = 0.4V Outputs Enabled Outputs Disabled -50 20 uA uA 50 30 mA mA 3 MNDS96F172M-X REV 1A0 MILITARY DATA SHEET Electrical Characteristics (Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC = 5.5V AC: VCC = 5.0V SYMBOL IOS (1) IOS (2) IOS (3) IOS (4) tPLH PARAMETER Short Circuit Output Current Short Circuit Output Current Short Circuit Output Current Short Circuit Output Current Propagation Delay Lo to Hi Level Propagation Delay Hi to Lo Level Output to Output Delay Time Output Disable Time From Low Level Output Disable Time From High Level Output Enable Time to Low Level Output Enable Time to High Level Differential Output Delay Time Differential Output Transition Time Note 1: Note 2: VO = -7V VO = 0V VO = VCC VO = 12V RL = 27 ohms, CL = 15pF CONDITIONS NOTES 2 2 2 2 PINNAME MIN -250 -150 150 250 25 16 RL = 27 ohms, CL = 15pF 25 16 RL = 60 ohms 10 4 tLZ RL = 110 ohms, CL = 50pF 40 25 RL = 110 ohms, CL = 50pF 80 30 RL = 110 ohms, CL = 50pF 100 40 RL = 110 ohms, CL = 50pF 40 32 RL = 60 ohms, CL = 15pF 30 22 tTD RL = 60 ohms, CL = 15pF 40 22 MAX UNIT mA mA mA mA ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns SUBGROUPS 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 10, 11 9 tPHL SKEW tHZ tZL tZH tDD -55C Limit exceeds EIA standard RS-485 Spec. .2uF cap is connected between the output and GND to reduce oscilation. 4 |
Price & Availability of NSC05257
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |